Inspection of I-Joists in Residential Construction
Publication: Practice Periodical on Structural Design and Construction
Volume 19, Issue 4
Abstract
I-joists may be used as floor joist and roof-rafter members in residential construction but require different installation practices compared with solid-sawn lumber because of I-joist geometry and design. The building codes in this paper contain clear specifications for the installation of sawn-lumber products. Because I-joists are proprietary and installation requirements vary by brand, manufacturer literature is incorporated by reference into the building codes discussed herein. The engineered and proprietary nature of I-joists may be unfamiliar to carpenters and other trade professionals, resulting in installation errors. I-joist installations that do not comply with manufacturer specifications are considered code violations. Through use of the Delphi method, an expert-validated inspection methodology was developed by interviewing code officials, home inspectors, and engineered-wood-product manufacturers. This paper summarizes the results, including best practices for inspection methods and I-joist installation errors most likely to occur. Effective inspection methods include the top-down method, a circular inspection pattern on each level of the structure (the nautilus method), and a comparison of repeating members in a support structure (the pattern method). Common I-joist installation errors include improper (1) holes, cuts, and notches; (2) bearing; (3) bracing; (4) blocking; (5) hanger hardware installation; and (6) rim-joist installation. Application of the recommended inspection practices can improve the detection of I-joist construction errors.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Forest and Paper Association (AF&PA). (2006). I-joist awareness guide, Washington, DC.
American Forest and Paper Association (AF&PA). (2013). Design for code acceptance 6: Prescriptive residential wood deck construction guide, Washington, DC.
Bouldin, J. C. (2011). “Methodology for the visual inspection of selected engineered wood products and connector hardware for prescriptive non-compliance at the pre-drywall stage of residential construction.” Ph.D. dissertation, Virginia Tech, Blacksburg, VA.
Bouldin, J. C., and Showalter, J. (2008). “Good design should consider poor execution.” Wood Design Focus, 18(2), 3–6.
Carson, J. (1989). “Verification and validation: A consultant’s perspective.” Proc., 1989 Winter Simulation Conf., Association for Computing Machinery, New York.
Creswell, J. W., and Miller, D. L. (2000). “Determining validity in qualitative inquiry.” Theory into Practice, 39(3), 124–132.
Engineered Wood Association (APA). (2012). Performance rated I-joists, Tacoma, WA.
International Code Council (ICC). (2011). International residential code for one- and two- family dwellings code and commentary, Washington, DC.
Law, A. M., and Kelton, W. D. (1982). Simulation modeling and analysis, McGraw-Hill, New York.
Skulmoski, G. J., Hartman, F. T., and Krahn, J. (2007). “The Delphi method for graduate research.” J. Inform. Technol. Educ., 6, 1–21.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Oct 14, 2013
Accepted: Oct 22, 2013
Published online: Oct 24, 2013
Discussion open until: Jul 27, 2014
Published in print: Nov 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.