Overview of Structural Health Monitoring for Steel Bridges
Publication: Practice Periodical on Structural Design and Construction
Volume 18, Issue 3
Abstract
Because of the unpredictable nature of mechanical and environmental loads, steel bridges do not necessarily behave as anticipated in design. Moreover, such loads cause the deterioration of the bridge with respect to time. In the United States, there are many highway bridges classified as structurally deficient because of aging and/or insufficient design. Also, considering the catastrophe of the I-35W Mississippi River Bridge, it is critical to implement a system to monitor the health of bridges and report when and where maintenance operations are needed. Through successful health monitoring, the life of a deteriorating bridge can be extended, and catastrophic failure events can be prevented. Therefore, it is important to have a systematic approach to monitor the health of a bridge. Despite its promising benefits, structural health monitoring (SHM) is infrequently used in bridge applications. This paper will present the basic concepts of SHM and the conventional and new sensors applied for monitoring various structural parameters in steel bridges, which is beneficial to practitioners on bridge inspection and retrofitting.
Get full access to this article
View all available purchase options and get full access to this article.
References
Chandler Monitoring Systems. (2011). Arsenal bride project, Chandler Monitoring Systems, Lawrenceville, GA.
Faber, M. H., Kohler, J., and Nishjima K. (2011). “Optimization of assessment strategies for aging bridges.” Applications of statistics and probability in civil engineering, CRC Press, Boca Raton, FL, 581–586.
Giles, R. K., et al. (2011). “Structural health indices for steel truss bridges.” Proc., Conf. Society for Experimental Mechanics Series, Society for Experimental Mechanics, Bethel, CT, 391–398.
Glisic, B., Inaudi, D., and Casanova, N. (2010). “SHM process as perceived through 350 projects.” Proc., 2010 SPIE Smart Structures and Materials/NDE Symposium, San Diego, 764–780.
Hao, S. (2010). “A note of the I-35W bridge collapse.” J. Bridge Eng., 15(5), 608–614.
Huston, D. (2010). Structural sensing, health monitoring, and performance evaluation, CRC Press, Boca Raton, FL.
Kijewski-Correa, T. (2005). “GPS: A new tool for structural displacement measurements.” Association for Preservation Technology International, 36(1), 13–18.
Kim, S., et al. (2007). “Health monitoring of civil infrastructures using wireless sensor networks.” Proc., 6th Int. Conf. on Information Processing in Sensor Networks, ACM Press, Cambridge, MA, 254–263.
Kim, S., Frangopol, D. M., and Zhu, B. (2011). “Probabilistic optimum inspection/repair planning to extend lifetime of deteriorating structures.” J. Perform. Constr. Facil., 25(6), 534–543.
Kobayashi, T., Muragishi, O., and Nihei, K. (2004). “Development of fatigue detecting sensor.” Key Eng. Mater., 261–263, 1313–1318.
Li, H., et al. (2006). “Structural health monitoring system for the Shandong Binzhou yellow river highway bridge.” Comput. Aided Civ. Infrastruct. Eng., 21(4), 306–317.
Matta, F., Bastianini, F., Galati, N., Casadei, P., and Nanni, A. (2008). “Distributed strain measurement in steel bridge with fiber optic sensors: Validation through diagnostic load test.” J. Perform. Constr. Facil., 22(4), 264–273.
Nair, A., and Cai, C. S. (2010). “Acoustic emission monitoring of bridges: Review and case studies.” Eng. Struct., 32(6), 1704–1714.
Spencer, B. F., Jr., and Cho, S. (2011). “Wireless smart sensor technology for monitoring civil infrastructure: Technological developments and full-scale applications.” Proc., 2011 World Congress on Advances in Structural Engineering and Mechanics, Seoul, 4277–4304.
Thursby, G., Culshaw, B., and Betz, D. C. (2008). “Multifunctional fibre optic sensors monitoring strain and ultrasound.” Fatigue Fracture Eng. Mater. Struct., 31(8), 660–673.
Transportation for America. (2011). “The fix we’re in for: The state of our bridges.” Transportation for America, Washington, DC.
Zalt, A., V. Meganathan, S. Yehia, O. Abudayyeh, and I. Abdel-Qader. (2007). “Evaluating sensors for bridge health monitoring.” Proc. IEEE EIT 2007, Chicago, 367–372.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Aug 28, 2012
Accepted: Oct 23, 2012
Published online: Oct 25, 2012
Published in print: Aug 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.