Stainless Steel Armor Plate Design for Protecting Supercavitating Baffle Blocks against Debris Impacts in High-Velocity Stilling Basins
Publication: Practice Periodical on Structural Design and Construction
Volume 18, Issue 3
Abstract
Supercavitating baffle blocks, with their unique geometry, have been shown to be highly effective in reducing cavitation damage to stilling basins’ floors and to the baffle blocks themselves. However, this unique geometry, which consists of thin concrete edges and steep slopes, is very susceptible to abrasion erosion by debris impacts. This paper presents a methodology for sizing debris, calculating impact forces, and an armored plate design that can withstand high-velocity impacts while conforming to the baffle blocks challenging shape.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (2008a). “Erosion of concrete in hydraulic structures.” ACI 210R-93, Detroit, MI.
American Concrete Institute (ACI). (2008b). “Building code requirements for structural concrete and commentary.” ACI 318-08, Farmington Hills, MI.
American Institute of Steel Construction (AISC). (2005). Steel construction manual, 13th Ed., Chicago, IL.
ASCE. (2010). “Minimum design loads for buildings and other structures.” ASCE/SEI 7-10, Reston, VA.
Bureau of Reclamation. (1999). “Hydraulic model study of folsom dam spillway performance and stilling basin abrasion.” Rep. No. R-99-08, U.S. Dept. of the Interior, Denver, CO.
California Dept. of Parks and Recreation. (2006). “Temporary 5 MPH speed limit on Folsom Lake lifted.” 〈http://www.parks.ca.gov/pages/712/files/041906.pdf〉 (Jun. 1, 2012).
Cox, N. C., Huff, H. C., Einhellig, R. F., Svoboda, C. D., and Frizell, K. W. (2010). “It’s a bird, it’s a plane, it’s a super-cavitating baffle block-characteristics of energy dissipation.” Association of State Dam Safety Officials, Seattle, WA.
FEMA. (1995). “Engineering principles and practices for retrofitting flood prone residential buildings.” Rep. No. 259, Federal Emergency Management Agency, Washington, DC.
Haehnel, R. B., and Daly, S. F. (2002). “Maximum impact force of woody debris on floodplain structures.” Rep. No. ERDC/CRREL TR-02-2, USA Cold Regions Research and Engineering Laboratory, Engineering Research and Development Center, Hanover, NH.
Haehnel, R. B., and Daly, S. F. (2004). “Maximum impact force of woody debris on floodplain structures.” J. Hydraul. Eng., 130(2), 112–120.
ICC Evaluation Service, Inc. (2004). “HRC 100 series T-headed bars.” Evaluation Rep.ICC-ES-ER-5292, ANSI, Whittier, CA.
Johnson, C. (2006). “Folsom lake debris poses major clean-up effort.” 〈http://www.news10.net/news/article/16749/0/Folsom-Lake-Debris-Poses-Major-Clean-up-Effort〉 (Mar. 26, 2012).
Kriebel, D. L., Buss, L., and Rogers, S. (2000). “Impact loads from flood-borne debris.” American Society of Civil Engineers, Reston, VA.
Matskevitch, D. G. (1997). “Eccentric impact of an ice feature: Linearized model.” Cold Reg. Sci. Technol., 25(1), 159–171.
Nakato, T. (2000). “Model tests of hydraulic performance of Pit 6 Dam stilling basin.” J. Hydraul. Eng., 126(9), 638–652.
Salmon, C. G., Johnson, J. E., and Malhas, F. A. (2009). Steel structures design and behavior, 5th Ed., Pearson, Upper Saddle River, NJ.
Shakya, S., and Vinnakota, S. (2008). “Design aid for triangular bracket plates using AISC specifications.” Eng. J. Third Quarter, 187–196.
U.S. Army Corps of Engineers (USACE). (1990). “Hydraulic design of spillways.” Rep. No. EM 1110-2-1603, Washington, DC.
U.S. Army Corps of Engineers (USACE). (1995a). “Flood-proofing regulations.” Engineering pamphlet No. 1165-2-314, Washington, DC.
U.S. Army Corps of Engineers (USACE). (1995b). “Engineering and design––Evaluation and repair of concrete structures.” Rep. No. EM 1110-2-2002, Washington, DC.
U.S. Army Corps of Engineers (USACE). (2000). “Design of spillway tainter gates.” Rep. No. EM 1110-2-2702, Washington, DC.
U.S. Army Corps of Engineers (USACE). (2005). “Stability analysis of concrete structures.” Rep. No. EM 1110-2-2100, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Aug 20, 2012
Accepted: Oct 23, 2012
Published online: Oct 25, 2012
Published in print: Aug 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.