Seismic Behavior of Steel Pipeline Embedded in Controlled Low-Strength Material Subject to Reverse Slip Fault
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 12, Issue 3
Abstract
Controlled low-strength material (CLSM) has been widely used for pipe backfilling applications with several advantages, as described in detail in numerous documents. Our previous study indicated that buried pipelines backfilled with CLSM show better performance when subject to seismic wave propagation. In this study, a nonlinear three-dimensional finite-element (FE) model was used to evaluate the seismic performance of buried steel pipe backfilled with CLSM when subject to a reverse-slip fault. The developed FE model results were validated by full-scale experimental data obtained by others from the available literature. After FE model validation, the developed FE model was utilized to evaluate the effect of various FE model parameters on pipe seismic performance, including CLSM trench continuity through the fault plane, CLSM–pipe friction coefficient, backfill material shear strength and Young’s modulus, and pipe diameter-to-thickness ratio. The seismic performance of pipe embedded in CLSM backfills was compared to pipe embedded in soil backfills. Results from these model parametric studies indicated that the pipe with CLSM backfill did not show better seismic performance than soil backfill due to the higher material stiffness. The research findings from the previous study by the authors in conjunction with the findings from this study provide a more complete understanding of pipe seismic performance backfilled with CLSM in seismic-prone areas.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data or models that support the findings of this study are available from the corresponding author upon reasonable request.
References
ACI (American Concrete Institute). 2013. Report on controlled low-strength materials. Farmington Hills, MI: ACI.
Applied Technologies, GCP. 2017. DaraFill controlled low strength material. Ontario, Canada: Applied Technologies, GCP.
ASCE. 1984. Guidelines for the seismic design of oil and gas pipeline systems. Reston, VA: ASCE.
ASCE. 2009. Buried flexible steel pipe design and structural analysis. Reston, VA: ASCE.
Banushi, G., N. Squeglia, and K. Thiele. 2018. “Innovative analysis of a buried operating pipeline subjected to strike-slip fault movement.” Soil Dyn. Earthquake Eng. 107 (Apr): 234–249. https://doi.org/10.1016/j.soildyn.2018.01.015.
Bolvardi, V., and A. Bakhshi. 2010. “A study on seismic behavior of buried steel pipelines crossing active faults.” In Pipelines 2010: Climbing New Peaks to Infrastructure Reliability: Renew, Rehab, and Reinvest, 1–12. Reston, VA: ASCE. https://doi.org/10.1061/41138(386)1.
Dassault Systèmes. 2014. Abaqus analysis user’s guide v6.14. Johnston, RI: Dassault Systèmes.
Eguchi, R. T. 1982. Earthquake performance of water supply components during the 1971 San Fernando earthquake. Redondo Beach, CA: J. H. Wiggins.
Gantes, C., and V. Melissianos. 2016. “Evaluation of seismic protection methods for buried fuel pipelines subjected to fault rupture.” Front. Built. Environ. 2 (Dec): 34. https://doi.org/10.3389/fbuil.2016.00034.
Han, W., S. Kim, J.-S. Lee, and Y.-H. Byun. 2019. “Friction behavior of controlled low strength material-soil interface.” Geomech. Eng. 18 (4): 407–415. https://doi.org/10.12989/gae.2019.18.4.407.
Jalali, H. H., F. R. Rofooei, N. K. A. Attari, and M. Samadian. 2016. “Experimental and finite element study of the reverse faulting effects on buried continuous steel gas pipelines.” Soil Dyn. Earthquake Eng. 86 (Jul): 1–14. https://doi.org/10.1016/j.soildyn.2016.04.006.
Javed, A., W. Lovencin, and F. T. Najafi. 2002. “Current status of accelerated flowable fill in the pavement section.” In Proc., Annual Conf. Canadian Social for Civil Engineering, 2333–2341. Montreal: Canadian Society for Civil Engineering.
Kennedy, R. P., A. W. Chow, and R. A. Williamson. 1977. “Fault movement effects on buried oil pipeline.” J. Transp. Eng. 3 (5): 617–633.
Kulhawy, F. H., and P. W. Mayne. 1990. Manual on estimating soil properties for foundation design. New York: Cornell Univ.
Ling, T. C., S. K. Kaliyavaradhan, and C. S. Poon. 2018. “Global perspective on application of controlled low-strength material (CLSM) for trench backfilling—An overview.” Constr. Build. Mater. 158 (Jan): 535–548. https://doi.org/10.1016/j.conbuildmat.2017.10.050.
Melissianos, V., D. Vamvatsikos, and C. Gantes. 2017. “Performance-based assessment of protection measures for buried pipes at strike-slip fault crossings.” Soil Dyn. Earthquake Eng. 101 (Oct): 1–11. https://doi.org/10.1016/j.soildyn.2017.07.004.
Melissianos, V., D. Vamvatsikos, and C. Gantes. 2020. “Methodology for failure mode prediction of onshore buried steel pipelines subjected to reverse fault rupture.” Soil Dyn. Earthquake Eng. 135 (Aug): 106116. https://doi.org/10.1016/j.soildyn.2020.106116.
NCHRP (National Cooperative Highway Research Program). 2008. Development of a recommended practice for use of controlled low-strength material in highway construction. Washington, DC: Transportation Research Board.
Newmark, N. M., and W. J. Hall. 1975. “Pipeline design to resist large fault displacement.” In Proc., US National Conf. on Earthquake Engineering, 2333–2341. Oakland, CA: Earthquake Engineering Research Institute.
Paolucci, R., S. Griffini, and S. Mariani. 2010. “Simplified modelling of continuous buried pipelines subject to earthquake fault rupture.” Earthquake Struct. 1 (3): 253–267. https://doi.org/10.12989/eas.2010.1.3.253.
Sadowski, A., and J. Rotter. 2013. “Solid or shell finite elements to model thick cylindrical tubes and shells under global bending.” Int. J. Mech. Sci. 74 (Sep): 143–153. https://doi.org/10.1016/j.ijmecsci.2013.05.008.
Shah, H. 2012. “Controlled low-strength material (CLSM) produced from limestone fines and other byproducts.” M.S. thesis, Dept. of Civil and Mechanical Engineering, Univ. of Missouri-Kansas City.
Somboonyanon, P., and C. Halmen. 2018. “Finite element model analysis of pipes embedded in controlled low-strength material under seismic wave propagation.” ACI Struct. J. 115 (6): 1729–1736.
Takada, S., J. W. Liang, and T. Li. 1998. “Shell-mode response of buried pipelines to large fault movements.” J. Struct. Eng. 44 (1): 1637–1646.
Tarinejad, R., A. Mahdavi, and N. Jahangir. 2012. “Buried pipeline response analysis to reverse-slip fault displacements.” In Proc., 15th World Conf. on Earthquake Engineering. Lisbon, Portugal: Sociedade Portuguesa de Engenharia Sismica.
Trifonov, O. 2015. “Numerical stress-strain analysis of buried steel pipelines crossing active strike-slip faults with an emphasis on fault modeling aspects.” J. Pipeline Syst. Eng. Pract. 6 (1): 04014008. https://doi.org/10.1061/(ASCE)PS.1949-1204.0000177.
Tsatsis, A., M. Loli, and G. Gazetas. 2019. “Pipeline in dense sand subjected to tectonic deformation from normal or reverse faulting.” Soil Dyn. Earthquake Eng. 127 (Dec): 105780. https://doi.org/10.1016/j.soildyn.2019.105780.
Uckan, E., B. Akbas, J. Shen, W. Rou, F. Paolacci, and M. O’Rourke. 2015. “A simplified analysis model for determining the seismic response of buried steel pipes at strike-slip fault crossings.” Soil Dyn. Earthquake Eng. 75 (Aug): 55–65. https://doi.org/10.1016/j.soildyn.2015.03.001.
Vazouras, P., P. Dakoulas, and S. A. Karamanos. 2015. “Pipe–soil interaction and pipeline performance under strike–slip fault movements.” Soil Dyn. Earthquake Eng. 72 (May): 48–65. https://doi.org/10.1016/j.soildyn.2015.01.014.
Vazouras, P., S. A. Karamanos, and P. Dakoulas. 2012. “Mechanical behavior of buried steel pipes crossing active strike-slip faults.” Soil Dyn. Earthquake Eng. 41 (Oct): 164–180. https://doi.org/10.1016/j.soildyn.2012.05.012.
Wang, L. R.-L., and Y. A. Yeh. 1985. “A refined seismic analysis and design of buried pipeline for fault movement.” Earthquake Eng. Struct. Dyn. 13 (1): 75–96. https://doi.org/10.1002/eqe.4290130109.
Zhang, J., Z. Liang, C. Han, and H. Zhang. 2015. “Numerical simulation of buckling behavior of the buried steel pipeline under reverse fault displacement.” Mech. Sci. 6 (2): 203–210. https://doi.org/10.5194/ms-6-203-2015.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jun 16, 2020
Accepted: Jan 25, 2021
Published online: May 7, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 7, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.