Retracted: Effect of Crushed Granite, Superabsorbent Polymer, and Expansive Agent on the Workability, Compressive Properties, and Autogenous Shrinkage of Ultrahigh-Performance Concrete
This article has been retracted.
VIEW THE RETRACTION NOTICEPublication: Journal of Materials in Civil Engineering
Volume 35, Issue 4
Abstract
This study proposed to introduce a combination of crushed granite (CG), superabsorbent polymer (SAP), and expansive agent (EA) into ultrahigh-performance concrete (UHPC) to mitigate the early autogenous shrinkage of UHPC without causing deterioration of its workability and mechanical performance. To this end, the effects of CG, SAP, and EA individually and their combinations on the workability, compressive strength, and autogenous shrinkage of UHPC were investigated. The results showed that CG, EA, and SAP all reduced the autogenous shrinkage of UHPC. However, the addition of CG and EA deteriorated the workability of UHPC, while the introduction of SAP decreased the compressive strength of UHPC. When CG (14.7% vol.), 1% EA, and 0.15% SAP were combined (CG+EA-1+SAP-0.15), UHPC showed the best overall performance. Specifically, the 7-day autogenous shrinkage of the CG+EA-1+SAP-0.15 group was , which was 68% lower than the reference group (without CG, EA, and SAP); the 28-day compressive strength was slightly improved; and the slump flow was only 1.6% lower than that of the reference group, which was negligible. The results of thermogravimetry analysis showed that SAP could enhance the hydration of portland cement and EA, and could also promote the pozzolanic reaction of ground granulated blast furnace slag and silica fume. The results of mercury intrusion porosimetry demonstrated that the microstructure of UHPC was refined due to the enhancement of hydration by internal curing of SAP. Besides, when CG, EA, and SAP were combined, the total porosity of UHPCs first decreased and then increased when the dosage of SAP increased. Specifically, the total porosities of the reference, CG+EA-1+SAP-0.1, CG+EA-1+SAP-0.15, and CG+EA-1+SAP-0.2 groups were 9.6%, 9.2%, 5.5%, and 9.4%, respectively. The CG+EA-1+SAP-0.15 group had minimum porosity, which was 42.87% lower than reference group. The above results demonstrated that the combined use of CG, SAP, and EA can effectively mitigate the early autogenous shrinkage of UHPC, but the optimal ratio between EA and SAP should be further studied.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The Natural Science Foundation of China (51908247) and the Opening Project of Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering (KFJJ202007) are gratefully acknowledged.
References
Androuet, C., and J.-P. Charron. 2021. “Shrinkage mitigation of an ultra-high performance concrete submitted to various mixing and curing conditions.” Materials (Basel) 14 (14): 3982. https://doi.org/10.3390/ma14143982.
Ashish, D. K. 2019. “Concrete made with waste marble powder and supplementary cementitious material for sustainable development.” J. Cleaner Prod. 211 (Feb): 716–729. https://doi.org/10.1016/j.jclepro.2018.11.245.
Ashish, D. K., and S. K. Verma. 2018. “Effect on permeability of concrete made with successive recycled aggregate and silica fume.” In Urbanization challenges in emerging economies: Resilience and sustainability of infrastructure, 196–205. Reston, VA: ASCE.
ASTM. 2014. Standard test method for slump flow of self-consolidating concrete. ASTM C1611/C1611M-12. West Conshohocken, PA: ASTM.
Chinese Industry Standard. 2018. Fundamental characteristics and test methods of ultra-high performance concrete. T/CBMF–37. Beijing: China Building Materials Press.
Cui, K., K. Liang, J. Chang, and D. Lau. 2022. “Investigation of the macro performance, mechanism, and durability of multiscale steel fiber reinforced low-carbon ecological UHPC.” Constr. Build. Mater. 327 (Jul): 126921. https://doi.org/10.1016/j.conbuildmat.2022.126921.
De Belie, N., J. Kratky, and S. Van Lederberg. 2010. “Influence of pozzolans and slag on the microstructure of partially carbonated cement paste by means of water vapour and nitrogen sorption experiments and BET calculations.” Cem. Concr. Res. 40 (12): 1723–1733. https://doi.org/10.1016/j.cemconres.2010.08.014.
Elmorsy, M., and W. M. Hassan. 2021. “Seismic behavior of ultra-high performance concrete elements: State-of-the-art review and test database and trends.” J. Build. Eng. 40 (Aug): 102572. https://doi.org/10.1016/j.jobe.2021.102572.
Fan, Z. T., W. Huang, and A. Negotiant. 2022. “Repairing steel girder end corrosion using ultra-high performance concrete.” J. Bridge Eng. 27 (1): 05021015. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001809.
Funk, J. E., and D. R. Dinger. 1994. Predictive process control of crowded particulate suspensions: Applied to ceramic manufacturing. Boston: Kluwer Academic Publishers.
Gómez-Zamorano, L. Y., and J. I. Escalante-García. 2010. “Effect of curing temperature on the nonevaporable water in portland cement blended with geothermal silica waste.” Cem. Concr. Compos. 32 (8): 603–610. https://doi.org/10.1016/j.cemconcomp.2010.07.004.
Gong, J., H. Luo, Y. Zhang, X. Gong, Z. Xie, W. Wu, and Y. Dai. 2021. “Effect of shrinkage reducing agent and HCSA expansion agent on mechanical properties and shrinkage properties of UHPC.” Mater. Rev. 35 (4B): 8042–8048. https://doi.org/10.11896/cldb.20010114.
Guan, D., R. Xu, S. Yang, Z. Chen, and Z. Guo. 2022. “Development and seismic behavior of a novel UHPC-shell strengthened prefabricated concrete column.” J. Build. Eng. 46 (Apr): 103672. https://doi.org/10.1016/j.jobe.2021.103672.
Hain, A., and A. E. Zaghi. 2021. “Learnings from the field implementation of a novel ultra-high performance concrete beam end repair on a corroded steel girder bridge in Connecticut.” Transp. Res. Rec. 2675 (9): 703–714. https://doi.org/10.1177/03611981211004128.
He, Z. H., H. N. Zhu, M. Y. Zhang, J. Y. Shi, S. G. Du, and B. J. Liu. 2021. “Autogenous shrinkage and nano-mechanical properties of UHPC containing waste brick powder derived from construction and demolition waste.” Constr. Build. Mater. 306 (Nov): 124869. https://doi.org/10.1016/j.conbuildmat.2021.124869.
Hisseine, O. A., N. A. Soliman, B. Tonia, and A. Tagnit-Hamou. 2020. “Nano-engineered ultra-high performance concrete for controlled autogenous shrinkage using nanocellulose.” Cem. Concr. Res. 137 (Nov): 106217. https://doi.org/10.1016/j.cemconres.2020.106217.
Hou, D., D. Li, P. Hua, J. Jiang, and G. Zhang. 2019. “Statistical modelling of compressive strength controlled by porosity and pore size distribution for cementitious materials.” Cem. Concr. Compos. 96 (Nov): 11–20. https://doi.org/10.1016/j.cemconcomp.2018.10.012.
Jang, S.-J., and H.-D. Yun. 2018. “Combined effects of steel fiber and coarse aggregate size on the compressive and flexural toughness of high-strength concrete.” Compos. Struct. 185 (Feb): 203–211. https://doi.org/10.1016/j.compstruct.2017.11.009.
Jennings, H. M., A. Kumar, and G. Sant. 2015. “Quantitative discrimination of the nano-pore-structure of cement paste during drying: New insights from water sorption isotherms.” Cem. Concr. Res. 76 (Oct): 27–36. https://doi.org/10.1016/j.cemconres.2015.05.006.
Jensen, O. M., and P. F. Hansen. 2001. “Water-entrained cement-based materials I. Principles and theoretical background.” Cem. Concr. Res. 31 (4): 647–654. https://doi.org/10.1016/S0008-8846(01)00463-X.
Kang, S.-H., S.-G. Hong, and J. Moon. 2018a. “The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete.” Constr. Build. Mater. 172 (May): 29–40. https://doi.org/10.1016/j.conbuildmat.2018.03.193.
Kang, S.-H., S.-G. Hong, and J. Moon. 2018b. “Shrinkage characteristics of heat-treated ultra-high performance concrete and its mitigation using superabsorbent polymer based internal curing method.” Cem. Concr. Compos. 89 (May): 130–138. https://doi.org/10.1016/j.cemconcomp.2018.03.003.
Li, P. P., H. J. H. Brouwers, W. Chen, and Q. L. Yu. 2020. “Optimization and characterization of high-volume limestone powder in sustainable ultra-high performance concrete.” Constr. Build. Mater. 242 (May): 118112. https://doi.org/10.1016/j.conbuildmat.2020.118112.
Li, S., L. Mo, M. Deng, and S. Cheng. 2021. “Mitigation on the autogenous shrinkage of ultra-high performance concrete via using MgO expansive agent.” Constr. Build. Mater. 312 (May): 125422. https://doi.org/10.1016/j.conbuildmat.2021.125422.
Lim, I., J. Sawab, J. Wang, S. Fan, Y. L. Mo, and M. Li. 2021. “Characterization of ultrahigh-performance concrete materials for application in modular construction.” J. Mater. Civ. Eng. 33 (5): 04021087. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003674.
Ling, G., Z. Shui, X. Gao, T. Sun, R. Yu, and X. Li. 2021. “Utilizing iron ore tailing as cementitious material for eco-friendly design of ultra-high performance concrete (UHPC).” Materials (Basel) 14 (8): 1829. https://doi.org/10.3390/ma14081829.
Liu, F., S.-L. Shen, D.-W. Hou, A. Arulrajah, and S. Horpibulsuk. 2016. “Enhancing behavior of large volume underground concrete structure using expansive agents.” Constr. Build. Mater. 114 (Jul): 49–55. https://doi.org/10.1016/j.conbuildmat.2016.03.075.
Liu, J., N. Farzadnia, and C. Shi. 2020a. “Effects of superabsorbent polymer on interfacial transition zone and mechanical properties of ultra-high performance concrete.” Constr. Build. Mater. 231 (Jan): 117142. https://doi.org/10.1016/j.conbuildmat.2019.117142.
Liu, J., N. Farzadnia, and C. Shi. 2021a. “Microstructural and micromechanical characteristics of ultra-high performance concrete with superabsorbent polymer (SAP).” Cem. Concr. Res. 149 (Nov): 106560. https://doi.org/10.1016/j.cemconres.2021.106560.
Liu, J., K. H. Khayat, and C. Shi. 2020b. “Effect of superabsorbent polymer characteristics on rheology of ultra-high performance concrete.” Cem. Concr. Compos. 112 (Sep): 103636. https://doi.org/10.1016/j.cemconcomp.2020.103636.
Liu, J. H., N. Farzadnia, K. H. Khayat, and C. J. Shi. 2021b. “Effects of SAP characteristics on internal curing of UHPC matrix.” Constr. Build. Mater. 280 (Apr): 122530. https://doi.org/10.1016/j.conbuildmat.2021.122530.
Liu, K., R. Yu, Z. Shui, X. Li, C. Guo, B. Yu, and S. Wu. 2019. “Optimization of autogenous shrinkage and microstructure for ultra-high performance concrete (UHPC) based on appropriate application of porous pumice.” Constr. Build. Mater. 214 (Jul): 369–381. https://doi.org/10.1016/j.conbuildmat.2019.04.089.
Liu, L., Z. Fang, Z. Huang, and Y. Wu. 2022. “Solving shrinkage problem of ultra-high-performance concrete by a combined use of expansive agent, super absorbent polymer, and shrinkage-reducing agent.” Composites, Part B-Eng. 230 (Feb): 109503. https://doi.org/10.1016/j.compositesb.2021.109503.
Liu, Y., and Y. Wei. 2021c. “Internal curing by porous calcined bauxite aggregate in ultrahigh-performance concrete.” J. Mater. Civ. Eng. 33 (3): 04020497. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003616.
Liu, Y. L., and Y. Wei. 2021d. “Effect of calcined bauxite powder or aggregate on the shrinkage properties of UHPC.” Cem. Concr. Compos. 118 (Apr): 103967. https://doi.org/10.1016/j.cemconcomp.2021.103967.
Matos, A. M., S. Nunes, C. Costa, and J. L. Barroso-Aguiar. 2019. “Spent equilibrium catalyst as internal curing agent in UHPFRC.” Cem. Concr. Compos. 104 (Nov): 103362. https://doi.org/10.1016/j.cemconcomp.2019.103362.
Mehta, A., and D. K. Ashish. 2020. “Silica fume and waste glass in cement concrete production: A review.” J. Build. Eng. 29 (May): 100888. https://doi.org/10.1016/j.jobe.2019.100888.
Rajabipour, F., G. Sant, and J. Weiss. 2008. “Interactions between shrinkage reducing admixtures (SRA) and cement paste’s pore solution.” Cem. Concr. Res. 38 (5): 606–615. https://doi.org/10.1016/j.cemconres.2007.12.005.
Ren, L., Z. Fang, and K. Wang. 2019. “Design and behavior of super-long span cable-stayed bridge with CFRP cables and UHPC members.” Composites, Part B-Eng. 164 (May): 72–81. https://doi.org/10.1016/j.compositesb.2018.11.060.
Ren, M., X. D. Wen, X. J. Gao, and Y. S. Liu. 2021. “Thermal and mechanical properties of ultra-high performance concrete incorporated with microencapsulated phase change material.” Constr. Build. Mater. 273 (Mar): 121714. https://doi.org/10.1016/j.conbuildmat.2020.121714.
Shen, P., L. Lu, Y. He, F. Wang, J. Lu, H. Zheng, and S. Hu. 2020. “Investigation on expansion effect of the expansive agents in ultra-high performance concrete.” Cem. Concr. Compos. 105 (Jan): 103425. https://doi.org/10.1016/j.cemconcomp.2019.103425.
Snoeck, D., D. Schaubroeck, P. Dubruel, and N. De Belie. 2014. “Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.50.” Constr. Build. Mater. 72 (Dec): 148–157. https://doi.org/10.1016/j.conbuildmat.2014.09.012.
Song, M., C. Wang, Y. Cui, Q. Li, Z. Gao, and T. Xie. 2021. “Mechanical performance and microstructure of ultra-high-performance concrete modified by calcium sulfoaluminate cement.” Adv. Civ. Eng. 2021 (Aug): 4002536. https://doi.org/10.1155/2021/4002536.
Su, A., L. Qin, S. Zhang, J. Zhang, and Z. Li. 2017. “Effects of shrinkage reducing agent and expansive admixture on the volume deformation of ultrahigh performance concrete.” Adv. Mater. Sci. Eng. 2017 (Jan): 6384859. https://doi.org/10.1155/2017/6384859.
Sun, Y., R. Yu, Z. Shui, X. Wang, D. Qian, B. Rao, J. Huang, and Y. He. 2019. “Understanding the porous aggregates carrier effect on reducing autogenous shrinkage of ultra-high performance concrete (UHPC) based on response surface method.” Constr. Build. Mater. 222 (Oct): 130–141. https://doi.org/10.1016/j.conbuildmat.2019.06.151.
Verger-Leboeuf, S., J.-P. Charron, and B. Massicotte. 2017. “Design and behavior of UHPFRC field-cast transverse connections between precast bridge deck elements.” J. Bridge Eng. 22 (7): 04017031. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001064.
Verma, S. K., and D. K. Ashish. 2017. “Mechanical behavior of concrete comprising successively recycled concrete aggregates.” Adv. Concr. Constr. 5 (4): 303–311. https://doi.org/10.12989/acc.2017.5.4.303.
Wang, F., J. Yang, S. Hu, X. Li, and H. Cheng. 2016. “Influence of superabsorbent polymers on the surrounding cement paste.” Cem. Concr. Res. 81 (Mar): 112–121. https://doi.org/10.1016/j.cemconres.2015.12.004.
Wang, T., J. Gong, B. Chen, X. Gong, H. Luo, Y. Zhang, and Z. Qu. 2021. “Effects of shrinkage reducing agent and expanded cement on UHPC fluidity, mechanical properties, and shrinkage performance.” Adv. Mater. Sci. Eng. 2021 (Jul): 9045754. https://doi.org/10.1155/2021/9045754.
Wang, Y., X. D. Shao, and J. H. Cao. 2019. “Experimental study on basic performances of reinforced UHPC bridge deck with coarse aggregates.” J. Bridge Eng. 24 (12): 04019119. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001492.
Wu, F., L. Xu, Y. Chi, Y. Zeng, F. Deng, and Q. Chen. 2020. “Compressive and flexural properties of ultra-high performance fiber-reinforced cementitious composite: The effect of coarse aggregate.” Compos. Struct. 236 (Mar): 111810. https://doi.org/10.1016/j.compstruct.2019.111810.
Wu, L.-S., Z.-H. Yu, C. Zhang, Z. Yuan, and T. Bangi. 2022a. “Shrinkage and tensile properties of ultra-high-performance engineered cementitious composites (UHP-ECC) containing superabsorbent polymers (SAP) and united expansion agent (UEA).” Constr. Build. Mater. 339 (Jul): 127697. https://doi.org/10.1016/j.conbuildmat.2022.127697.
Wu, N., T. Ji, P. Huang, T. Fu, X. Zheng, and Q. Xu. 2022b. “Use of sugar cane bagasse ash in ultra-high performance concrete (UHPC) as cement replacement.” Constr. Build. Mater. 317 (Jan): 125881. https://doi.org/10.1016/j.conbuildmat.2021.125881.
Xie, T., C. Fang, M. S. M. Ali, and P. Visintin. 2018. “Characterizations of autogenous and drying shrinkage of ultra-high performance concrete (UHPC): An experimental study.” Cem. Concr. Compos. 91 (Aug): 156–173. https://doi.org/10.1016/j.cemconcomp.2018.05.009.
Yang, L., C. J. Shi, and Z. M. Wu. 2019. “Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete—A review.” Composites, Part B-Eng. 178 (Dec): 107456. https://doi.org/10.1016/j.compositesb.2019.107456.
Yang, M. H., Z. He, X. Chen, M. X. Li, and Z. L. Peng. 2021. “Comparative study on the macroscopic and microscopic properties of UHPC mixed with limestone powder and slag powder.” Geofluids 2021 (Jan): 5510490. https://doi.org/10.1155/2021/5510490.
Yu, K.-Q., W.-J. Zhu, Y. Ding, Z.-D. Lu, J.-t. Yue, and J.-Z. Xiao. 2019. “Micro-structural and mechanical properties of ultra-high performance engineered cementitious composites (UHP-ECC) incorporation of recycled fine powder (RFP).” Cem. Concr. Res. 124 (Oct): 105813. https://doi.org/10.1016/j.cemconres.2019.105813.
Zhang, G.-Z., and X.-Y. Wang. 2020. “Effect of pre-wetted zeolite sands on the autogenous shrinkage and strength of ultra-high-performance concrete.” Materials (Basel) 13 (10): 2356. https://doi.org/10.3390/ma13102356.
Zhang, L., J. Liu, J. Liu, Q. Zhang, and F. Han. 2018. “Effect of steel fiber on flexural toughness and fracture mechanics behavior of ultrahigh-performance concrete with coarse aggregate.” J. Mater. Civ. Eng. 30 (12): 04018323. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002519.
Zhang, X. Z., Z. C. Liu, and F. Z. Wang. 2019. “Autogenous shrinkage behavior of ultra-high performance concrete.” Constr. Build. Mater. 226 (Nov): 459–468. https://doi.org/10.1016/j.conbuildmat.2019.07.177.
Zhang, Y., J. Yang, T. Li, and M. Deng. 2022. “Mechanical behavior of RC columns strengthened with thin UHPC jacket under cyclic loads.” J. Build. Eng. 49 (May): 104065. https://doi.org/10.1016/j.jobe.2022.104065.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Apr 27, 2022
Accepted: Aug 4, 2022
Published online: Feb 6, 2023
Published in print: Apr 1, 2023
Discussion open until: Jul 6, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Jingbin Yang, Zhenping Sun, Nele De Belie, Didier Snoeck, Properties and Microstructure of Alkali-Activated Slag Paste Modified by Superabsorbent Polymers, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17117, 36, 5, (2024).