Mechanical Properties of Polyester-Coated Fabric Membrane Material Subjected to Uniaxial Loading at Elevated Temperatures
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 7
Abstract
Polyester-coated fabric has been widely used in membrane structures. However, the mechanical properties of polyester-coated fabric at elevated temperatures have not been well studied, limiting its applications in the fire-resistant analysis. This work concerns the temperature effects on the mechanical properties of the polyester-coated fabric membrane material from four common brands, with an experimental study on polyester-coated fabric specimens at 23°C, 70°C, 100°C, 150°C, 200°C, 230°C, and 250°C under uniaxial loading, respectively. The results indicate that the elastic modulus and the ultimate tensile strength of polyester-coated fabric membrane material decrease with temperature increasing. The breaking elongation first increases and then decreases with increasing temperature. The results are utilized to obtain simple empirical equations by applying membrane structure design and fire-resistant analysis. Change laws for elastic modulus, ultimate tensile strength, and breaking elongation with temperatures are proposed as equations; the constitutive relation of polyester-coated fabric membrane material with temperatures is also fitted by one two-stage equation. Of considerable significance is promoting the research of membrane structure design and fire-resistant analysis.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
1.
Data in Table 1 used during the study were provided by a third party. Direct requests for these materials might be made to the provider, as indicated in the Acknowledgments.
2.
All data generated or used during the study appear in the published article.
Acknowledgments
This work was funded by the Beijing Municipal Commission of Education (Grant No. KM201710005017). The technical parameters of the polyester-coated fabric membrane material and specimens were provided by Covertex Membranes (Shanghai) Co., Ltd. and Broadwell (Shenzhen) Technology Co., Ltd. Furthermore, the authors are deeply grateful for the supports of Professor Martin Mensinger, the head of the Chair of Metal Structures at the Technical University of Munich.
References
Ambroziak, A. 2015. “Mechanical properties of polyester coated fabric subjected to biaxial loading.” J. Mater. Civ. Eng. 27 (11): 04015012. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001265.
Ambroziak, A., and P. Kłosowski. 2014. “Mechanical properties of polyvinyl chloride-coated fabric under cyclic tests.” J. Reinf. Plast. Compos. 33 (3): 225–234. https://doi.org/10.1177/0731684413502858.
Andersson, P., and P. Blomqvist. 2010. Large-scale fire tests with textile membranes for building applications. Boras, Sweden: Fire technology, SP Technical Research Institute of Sweden.
Blomqvist, P., and M. Hjohlman. 2010. Fire tests with textile membranes on the market—Results and method development of cone calorimeter and SBI test methods. Boras, Sweden: Fire technology, SP Technical Research Institute of Sweden.
CECS (China Association for Engineering Construction Standardization). 2015. Technical specification for membrane structures. CECS 158. Beijing: China Planning Press.
Chen, J. W., W. J. Chen, and D. X. Zhang. 2014. “Experimental study on uniaxial and biaxial tensile properties of coated fabric for airship envelopes.” J. Reinf. Plast. Compos. 33 (7): 630–647. https://doi.org/10.1177/0731684413515540.
Hjohlman, M., P. Blomqvist, and S. Bengtson. 2010. Fire safety engineering of textile buildings following the prescriptive requirements in Sweden. Boras, Sweden: Fire technology, SP Technical Research Institute of Sweden.
Kim, K. J., W. R. Yu, and M. S. Kim. 2008. “Anisotropic creep modeling of coated textile membrane using finite element analysis.” Compos. Sci. Technol. 68 (7–8): 1688–1696. https://doi.org/10.1016/j.compscitech.2008.02.011.
Launay, J., G. Hivet, A. V. Duong, and P. Boisse. 2008. “Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements.” Compos. Sci. Technol. 68 (2): 506–515. https://doi.org/10.1016/j.compscitech.2007.06.021.
Li, G. Q., and Y. Du. 2005. “Utility temperature elevation empirical formula in large space fire.” Fire Sci. Technol. 24 (3): 283–287.
SAC (Standardization Administration of China). 2013. Coated fabrics for membrane structures. GB/T 30161-2013. Beijing: Standards Press of China.
Shi, J. Y., X. Sun, W. L. Liu, and Y. Q. Li. 2011. “Study of performance-based fire resistance design methodology for large space structures.” China Civ. Eng. J. 44 (5): 69–78. https://doi.org/10.15951/j.tmgcxb.2011.05.017.
SMCOHURD (Shanghai Municipal Commission of Housing and Urban-Rural Development). 2019. Standard for inspection of membrane structures. DG/TJ 08-2019. Shanghai, China: Tongji University Press.
Van Hees, P., and P. Blomqvist. 2007. A summary of fire regulations, requirements and test methods for technical textiles used in buildings. Boras, Sweden: Fire technology, SP Technical Research Institute of Sweden.
Xu, S. S., Y. Y. Zhang, J. H. Xu, and S. H. Chu. 2019. “Nonlinear anisotropic constitutive model of PVC coated fabrics.” J. Build. Mater. 23 (5): 1098–1103.
Yu, W. R., M. S. Kim, and J. S. Lee. 2006. “Modeling of anisotropic creep behavior of coated textile membranes.” Fibers Polym. 7 (2): 123–128. https://doi.org/10.1007/BF02908256.
Zhang, Y. Y., S. S. Xu, J. G. Xue, and Q. L. Zhang. 2017. “Anisotropic mechanical properties and constitutive relations of PTFE coated glass fibers.” Compos. Struct. 179 (Nov): 601–616. https://doi.org/10.1016/j.compstruct.2017.07.076.
Zhang, Y. Y., Q. L. Zhang, K. Lei, and B. L. Kuai. 2014. “Experimental analysis of tensile behaviors of polytetrafluoroethylene-coated fabrics subjected to monotonous and cyclic loading.” Text. Res. J. 84 (3): 231–245. https://doi.org/10.1177/0040517513494259.
Zhang, Y. Y., Q. L. Zhang, and C. Z. Zhou. 2012. “Effects of temperature on mechanical properties of PTFE coated fabrics.” J. Build. Mater. 15 (04): 478–483. https://doi.org/10.3969/j.issn.1007-9629.2012.04.008.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 29, 2020
Accepted: Nov 23, 2020
Published online: May 4, 2021
Published in print: Jul 1, 2021
Discussion open until: Oct 4, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Suduo Xue, Fei Yan, Guojun Sun, Mechanical properties of coated fabric membranes at high temperature, Journal of Engineered Fibers and Fabrics, 10.1177/15589250221101387, 17, (155892502211013), (2022).
- Andrzej Ambroziak, Paweł Kłosowski, Influence of Water-Induced Degradation of Polytetrafluoroethylene (PTFE)-Coated Woven Fabrics Mechanical Properties, Materials, 10.3390/ma15010001, 15, 1, (1), (2021).