Abstract
The aim of this study is to develop a time-dependent model for determining the chloride binding capacity of concrete with crystalline material (CM) with different water to binder () ratios, fly ash replacement proportions, curing times, and chloride exposure periods. The effect of CM on chemical and physical binding processes was considered in the development of the model. The model was developed based on the results of experimental analysis conducted by the authors. The values of chloride binding capacity predicted using the model fell within the R-squared values ranged from 0.842 to 0.982, which indicates satisfactory agreement with the experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors gratefully acknowledge the scholarship provided by Faculty of Engineering, Burapha University for the Ph.D. degree’s study of the first author and would like to acknowledge the research grant from Burapha University (Contract No. 112/2558) and the research supports from the Burapha Construction and Maintenance Technology Research Unit, Faculty of Engineering, Burapha University, and the Center of Excellence in Material Science, Construction and Maintenance Technology, Sirindhorn International Institute of Technology, Thammasat University.
References
ASTM. 2004a. Standard test method for acid-soluble chloride in mortar and concrete. ASTM C1152. West Conshohocken, PA: ASTM.
ASTM. 2004b. Standard test method for water-soluble chloride in mortar and concrete. ASTM C1218. West Conshohocken, PA: ASTM.
Boddy, A., E. Brntz, M. D. A. Thomas, and R. D. Hooton. 1999. “An overview and sensitivity study of a multimechanistic chloride transport model.” Cem. Concr. Res. 29 (6): 827–837. https://doi.org/10.1016/S0008-8846(99)00045-9.
Cappellesso, V. G., N. D. S. Petry, D. C. C. D. Molin, and A. B. Masuero. 2016. “Use of crystalline waterproofing to reduce capillary porosity in concrete.” J. Build. Pathol. Rehabil. 1 (1): 9. https://doi.org/10.1007/s41024-016-0012-7.
Cheewaket, T., C. Jaturapitakkul, and W. Chalee. 2010. “Long term performance of chloride binding capacity in fly ash concrete in a marine environment.” Constr. Build. Mater. 24 (8): 1352–1357. https://doi.org/10.1016/j.conbuildmat.2009.12.039.
Chen, S. C., R. Huang, H. M. Hsu, S. Y. Zou, and L. W. Teng. 2016. “Evaluation of penetration depth and protective effectiveness of concrete-penetrating sealer materials.” J. Mar. Sci. Technol. 24 (2): 244–249. https://doi.org/10.6119/JMST-015-1007-2.
Delagrave, A., J. Marchand, J. P. Ollivier, S. Julien, and K. Hazrati. 1997. “Chloride binding capacity of various hydrated cement paste systems.” Adv. Cem. Based Mater. 6 (1): 28–35. https://doi.org/10.1016/S1065-7355(97)90003-1.
De Weerdt, K., A. Colombo, L. Coppola, H. Justnes, and M. R. Geiker. 2015. “Impact of the associated cation on chloride binding of portland cement paste.” Cem. Concr. Res. 68 (Feb): 196–202. https://doi.org/10.1016/j.cemconres.2014.01.027.
Duan, A., J. G. Dai, and W. L. Jin. 2015. “Probabilistic approach for durability design of concrete structures in marine environments.” J. Mater. Civ. Eng. 27 (2): A4014007. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001023.
Feng, J., J. Sun, and P. Yan. 2018. “The influence of ground fly ash on cement hydration and mechanical property of mortar.” Adv. Civ. Eng. 2018: 1–7. https://doi.org/10.1155/2018/4023178.
Florea, M. V. A., and H. J. H. Brouwers. 2012. “Chloride binding related to hydration products.” Cem. Concr. Res. 42 (2): 282–290. https://doi.org/10.1016/j.cemconres.2011.09.016.
Florea, M. V. A., and H. J. H. Brouwers. 2014. “Modelling of chloride binding related to hydration products in slag-blended cements.” Constr. Build. Mater. 64 (Aug): 421–430. https://doi.org/10.1016/j.conbuildmat.2014.04.038.
Glass, G. K., and N. R. Buenfeld. 2000. “The influence of chloride binding on the chloride-induced corrosion risk in reinforced concrete.” Corros. Sci. 42 (2): 329–344. https://doi.org/10.1016/S0010-938X(99)00083-9.
Kijjanon, A. 2017. “A model for determining chloride penetration profile in concrete and repair-free service life of reinforced concrete under chloride environment.” Master thesis, Faculty of Engineering, Burapha Univ.
Kim, M. J., K. B. Kim, and K. Y. Ann. 2016. “The influence of content in cement on the chloride transport.” Adv. Mater. Sci. Eng. 2016: 1–8. https://doi.org/10.1155/2016/5962821.
Liu, J., G. Ou, Q. Qiu, X. Chen, J. Hong, and F. Xing. 2017. “Chloride transport and microstructure of concrete with/without fly ash under atmospheric chloride condition.” Constr. Build. Mater. 146 (Aug): 493–501. https://doi.org/10.1016/j.conbuildmat.2017.04.018.
Loser, R., B. Lothenbach, A. Leemann, and M. Tuchschmid. 2010. “Chloride resistance of concrete and its binding capacity—Comparison between experimental results and thermodynamic modeling.” Cem. Concr. Comp. 32 (1): 34–42. https://doi.org/10.1016/j.cemconcomp.2009.08.001.
Mindess, S., and J. F. Young. 1981. Concrete. Upper Saddle River, NJ: Prentice-Hall.
Muthulingam, S., and B. N. Rao. 2015. “Chloride binding and time-dependent surface chloride content models for fly ash concrete.” Front. Struct. Civ. Eng. 10 (1): 112–120. https://doi.org/10.1007/s11709-015-0322-x.
Nipatsat, N., and S. Tangtermsirikul. 2000. “Compressive strength prediction model for fly ash concrete.” Thammasat Int. J. Sci. Technol. 5 (1): 1–7.
Oh, B. H., K. H. Kim, and B. S. Jang. 2009. “Critical corrosion amount to cause cracking of reinforced concrete structures.” ACI Mater. J. 106 (4): 333. https://doi.org/10.14359/56653.
Pérez, B. M., H. Zibara, R. D. Hooton, and M. D. A. Thomas. 2000. “A study of the effect of chloride binding on service life predictions.” Cem. Concr. Res. 30 (8): 1215–1223. https://doi.org/10.1016/S0008-8846(00)00339-2.
Plang-ngern, S., and S. Tangtermsirikul. 1999. “Chloride binding capacity in fly ash concrete.” Eng. J. Res. Dev. 10 (2): 1–8.
Prak, L., T. Sumranwanich, and S. Tangtermsirikul. 2016. “A study on chloride profiles of concrete repaired with fly ash concrete and crystalline material.” In Proc., 7th Int. Conf. of Asian Concrete Federation. Pathum Thani, Thailand: Asian Concrete Federation.
Ramachadran, S., R. C. Seeley, and G. M. Polomark. 1984. “Free and combined chloride in hydrating cement and cement compounds.” Mater. Struct. 17 (4): 285–289. https://doi.org/10.1007/BF02479084.
Shi, C., X. Hu, X. Wang, Z. Wu, and D. Schutter Geert. 2017. “Effects of chloride ion binding on microstructure of cement pastes.” J. Mater. Civ. Eng. 29 (1): 04016183. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001707.
Sirisawat, I., W. Saengsoy, L. Baingam, P. Krammart, and S. Tangtermsirikul. 2014. “Durability and testing of mortar with interground fly ash and limestone cements in sulfate solutions.” Constr. Build. Mater. 64 (Aug): 39–46. https://doi.org/10.1016/j.conbuildmat.2014.04.083.
Sumranwanich, T. 2004. “Chloride binding capacity of cement-fly ash paste and simulation of chloride profile in concrete.” Ph.D. dissertation, Sirindhorn International Institute of Technology, Thammasat Univ.
Sumranwanich, T., and S. Tangtermsirikul. 2004. “A model for predicting time-dependent chloride binding capacity of cement-fly ash cementitious system.” Mater. Struct. 37 (6): 387–396. https://doi.org/10.1007/BF02479635.
Tang, L., and L. O. Nilsson. 1992. “Chloride binding capacity and binding isotherms of OPC pastes and mortars.” Cem. Concr. Res. 23 (2): 247–253. https://doi.org/10.1016/0008-8846(93)90089-R.
Tangtermsirikul, S., and W. Saengsoy. 2002. “Simulation of free water content of paste with fly ash.” Eng. J. Res. Dev. 13 (4): 1–10.
Teng, L. W., R. Huang, J. Chen, A. Cheng, and H. M. Hsu. 2014. “A study of crystalline mechanism of penetration sealer materials.” Materials 7 (1): 399–412. https://doi.org/10.3390/ma7010399.
Thomas, M. D. A., R. D. Hooton, A. Scott, and H. Zibara. 2012. “The effect of supplementary cementitious materials on chloride binding in hardened cement paste.” Cem. Con. Res. 42 (1): 1–7. https://doi.org/10.1016/j.cemconres.2011.01.001.
Wang, L., K. Uji, and A. Ueno. 2017. “Evaluation on reaction efficiency coefficient of fly ash based on threshold value of effective replacement ratio.” Cem. Sci. Concr. Technol. 71 (1): 645–652. https://doi.org/10.14250/cement.71.645.
Zhu, Q., L. Jiang, Y. Chen, J. Xu, and L. Mo. 2012. “Effect of chloride salt type on chloride binding behavior of concrete.” Constr. Build. Mater. 37 (Dec): 512–517. https://doi.org/10.1016/j.conbuildmat.2012.07.079.
Zibara, H. 2001. “Binding of external chlorides by cement pastes.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Toronto.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Mar 21, 2019
Accepted: Jul 29, 2020
Published online: Dec 2, 2020
Published in print: Feb 1, 2021
Discussion open until: May 2, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.