Quantification of Railway Ballast Degradation by Abrasion Testing and Computer-Aided Morphology Analysis
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 1
Abstract
Ballast degradation (particle breakage and abrasion) induced by repeated train loads may lead to insufficient track stiffness and excessive track settlement. For safe operation and effective maintenance of ballasted railroad tracks, an accurate assessment of the initial ballast particle size and shape properties and the morphology evolution with usage is very beneficial. Nevertheless, commonly used ballast specifications dictate only particle-size distribution or gradation testing, which is not capable of describing ballast particle morphology characteristics and those changes induced by surface abrasion and particle breakage experienced during ballast service life. To obtain morphological characteristics of ballast particles, Los Angeles abrasion testing was performed on two types of ballast materials, tuff and granulite. An enhanced particle boundary roughness treatment method was implemented in a computer-aided ballast morphology analysis system to capture and reconstruct the three-dimensional ballast geometry. By adopting this method, the degradation of ballast particles during service were assumed to be associated with the Los Angeles abrasion testing in the laboratory. Test results clearly showed the trends observed during the process of particle degradation quantified through imaging-based morphology indexes; angularity index (AI) and flat and elongated ratio (FER) typically decreased, whereas particle sphericity and convexity increased. In relation to such morphological changes, ballast abrasion was found to significantly reduce ballast material’s angle of repose.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
Financial support from the Basic Science Center Program of National Natural Science Foundation of China (51988101), the Key Research and Development Program of Zhejiang Province (2017C03020), and the Chinese Program of Introducing Talents of Discipline to University (B18047) is gratefully acknowledged.
References
Altuhafi, F., C. O’Sullivan, and I. Cavarretta. 2013. “Analysis of an image-based method to quantify the size and shape of sand particles.” J. Geotech. Geoenviron. Eng. 139 (8): 1290–1307. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000855.
Bian, X., H. Huang, E. Tutumluer, and Y. Gao. 2016. “‘Critical particle size’ and ballast gradation studied by discrete element modeling.” Transp. Geotech. 6 (Mar): 38–44. https://doi.org/10.1016/j.trgeo.2016.01.002.
Bian, X., G. Li, W. Li, and H. Jiang. 2014. “Morphology analysis of coarse aggregate based on 3D imaging method by using two planar mirrors.” [In Chinese.] China Civ. Eng. J. 47 (9): 135–144.
Bian, X., W. Li, Y. Qian, and E. Tutumluer. 2019. “Micromechanical particle interactions in railway ballast through DEM simulations of direct shear tests.” Int. J. Geomech. 19 (5): 04019031. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001403.
Boler, H., M. Wnek, and E. Tutumluer. 2012. “Establishing linkages between ballast degradation and imaging based aggregate particle shape, texture and angularity indices.” In Proc., 2nd Int. Conf. on Transportation Geotechnics. Sapporo, Japan: Hokkaido University.
Borhani, A., and K. Fakharian. 2016. “Effect of particle shape on dilative behavior and stress path characteristics of Chamkhaleh sand in undrained triaxial tests.” Int. J. Civ. Eng. 14 (4): 197–208. https://doi.org/10.1007/s40999-016-0048-8.
Cho, G. C., J. Dodds, and J. C. Santamarina. 2006. “Particle shape effects on packing density, stiffness, and strength: Natural and crushed sands.” J. Geotech. Geoenviron. Eng. 132 (5): 591–602. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:5(591).
Cleveland, W. S., and S. J. Devlin. 1988. “Locally weighted regression: An approach to regression analysis by local fitting.” J. Am. Stat. Assoc. 83 (403): 596–610. https://doi.org/10.1080/01621459.1988.10478639.
Efron, B., and R. J. Tibshirani. 1994. An introduction to the bootstrap. New York: Chapman and Hall.
Fernlund, J. M. R. 2005. “Image analysis method for determining 3D shape of coarse aggregate.” Cem. Concr. Res. 35 (8): 1629–1637. https://doi.org/10.1016/j.cemconres.2004.11.017.
Ge, H., A. Sha, Z. Han, and X. Xiong. 2018. “Three-dimensional characterization of morphology and abrasion decay laws for coarse aggregates.” Constr. Build. Mater. 188 (Nov): 58–67. https://doi.org/10.1016/j.conbuildmat.2018.08.110.
Huang, H., and E. Tutumluer. 2014. “Image-aided element shape generation method in discrete-element modeling for railroad ballast.” J. Mater. Civ. Eng. 26 (3): 527–535. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000839.
Indraratna, B., J. Lackenby, and D. Christie. 2005. “Effect of confining pressure on the degradation of ballast under cyclic loading.” Géotechnique 55 (4): 325–328. https://doi.org/10.1680/geot.2005.55.4.325.
Indraratna, B., S. Nimbalkar, M. Coop, and S. W. Sloan. 2014. “A constitutive model for coal-fouled ballast capturing the effects of particle degradation.” Comput. Geotech. 61 (Sep): 96–107. https://doi.org/10.1016/j.compgeo.2014.05.003.
Indraratna, B., N. Tennakoon, S. Nimbalkar, and C. Rujikiatkamjorn. 2013. “Behaviour of clay-fouled ballast under drained triaxial testing.” Géotechnique 63 (5): 410–419. https://doi.org/10.1680/geot.11.P.086.
Kock, I., and K. Huhn. 2007. “Influence of particle shape on the frictional strength of sediments—A numerical case study.” Sediment. Geol. 196 (1–4): 217–233. https://doi.org/10.1016/j.sedgeo.2006.07.011.
Krumbein, W. C. 1941. “Measurement and geological significance of shape and roundness of sedimentary particles.” J. Sediment. Petrol. 11 (2): 64–72. https://doi.org/10.1306/D42690F3-2B26-11D7-8648000102C1865D.
Le Pen, L. M., W. Powrie, A. Zervos, S. Ahmed, and S. Aingaran. 2013. “Dependence of shape on particle size for a crushed rock railway ballast.” Granular Matter 15 (6): 849–861. https://doi.org/10.1007/s10035-013-0437-5.
Ministry of Railways of the People’s Republic of China. 2008. Test method for railway ballast. TB/T 2328-2008. Beijing: Ministry of Railways of the People’s Republic of China.
Mora, C. F., and A. K. H. Kwan. 2000. “Sphericity, shape factor, and convexity measurement of coarse aggregate for concrete using digital image processing.” Cem. Concr. Res. 30 (3): 351–358. https://doi.org/10.1016/S0008-8846(99)00259-8.
Pan, T., and E. Tutumluer. 2006. “Evaluation of visual based aggregate shape classifications using the University of Illinois Aggregate Image Analyzer (UIAIA).” In Proc., GeoShanghai Int. Conf. 2006. Reston, VA: ASCE.
Pye, W. D., and M. H. Pye. 1943. “Sphericity determinations of pebbles and sand grains.” J. Sediment. Petrol. 13 (1): 28–34. https://doi.org/10.1306/D4269184-2B26-11D7-8648000102C1865D.
Qian, Y., H. Boler, M. Moaveni, E. Tutumluer, Y. M. A. Hashash, and J. Ghaboussi. 2014. “Characterizing ballast degradation through Los Angeles abrasion test and image analysis.” Transp. Res. Rec. 2448 (1): 142–151. https://doi.org/10.3141/2448-17.
Qian, Y., H. Boler, M. Moaveni, E. Tutumluer, Y. M. A. Hashash, and J. Ghaboussi. 2017. “Degradation-related changes in ballast gradation and aggregate particle morphology.” J. Geotech. Geoenviron. Eng. 143 (8): 04017032. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001706.
Rao, C., E. Tutumluer, and J. A. Stefanski. 2001. “Coarse aggregate shape and size properties using a new image analyzer.” J. Test. Eval. 29 (5): 461–471. https://doi.org/10.1520/JTE12276J.
Rao, C., E. Tutumluer, and I. T. Kim. 2002. “Quantification of coarse aggregate angularity based on image analysis.” Transp. Res. Rec. 1787 (1): 117–124. https://doi.org/10.3141/1787-13.
Selig, E. T., and J. M. Waters. 1994. Track geotechnology and substructure management. London: Thomas Telford.
Sukumaran, B., and A. K. Ashmawy. 2001. “Quantitative characterisation of the geometry of discrete particles.” Géotechnique 51 (7): 619–627. https://doi.org/10.1680/geot.2001.51.7.619.
Taylor, M. 2004. “Using multiple 2D projections to characterize 3D irregular particles.” In Proc., 12th Annual Symp. of the Int. Center for Aggregates Research. Denver: Transportation Research Board.
Tutumluer, E., and T. Pan. 2008. “Aggregate morphology affecting strength and permanent deformation behavior of unbound aggregate materials.” J. Mater. Civ. Eng. 20 (9): 617–627. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:9(617).
Viggiani, C. 2012. “What actually happens when granular materials deform under shear: A look within.” In Proc., American Geophysical Union, Fall Meeting. Washington, DC: American Geophysical Union.
Wadell, H. 1932. “Volume, shape, and roundness of rock particles.” J. Geol. 40 (5): 443–451. https://doi.org/10.1086/623964.
Wadell, H. 1933. “Sphericity and roundness of rock particles.” J. Geol. 41 (3): 310–331. https://doi.org/10.1086/624040.
Xiao, J., X. Zhang, D. Zhang, L. Xue, S. Sun, J. Stránský, and Y. Wang. 2020. “Morphological reconstruction method of irregular shaped ballast particles and application in numerical simulation of ballasted track.” Transp. Geotech. 24 (Sep): 100374. https://doi.org/10.1016/j.trgeo.2020.100374.
Zhang, Z., W. Gao, X. Wang, J. Zhang, and X. Tang. 2020. “Degradation-induced evolution of particle roundness and its effect on the shear behaviour of railway ballast.” Transp. Geotech. 24 (Sep): 100388. https://doi.org/10.1016/j.trgeo.2020.100388.
Zheng, J., and R. D. Hryciw. 2015. “Traditional soil particle sphericity, roundness and surface roughness by computational geometry.” Géotechnique 65 (6): 494–506. https://doi.org/10.1680/geot.14.P.192.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Feb 11, 2020
Accepted: Jun 29, 2020
Published online: Oct 23, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 23, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.