Ground and Sieved Bio Ash versus Coal Fly Ash: Comparative Analysis of Pozzolanic Reactivity
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 12
Abstract
Due to the declining availability of coal fly ash, there is a need to identify alternative sources of supplementary cementitious materials (SCMs). This article presents an investigation on the reactivity of ground and sieved bio ash that can be used as alternative sources of SCM. The oxide contents of bio ash are similar to Class-C coal fly ash. Accordingly, bio ash was found to have both hydraulic and pozzolanic reactivity. Ground bio ash showed higher heat of hydration and similar compressive strength compared to coal fly ash at the early stage (i.e., up to 7 days) of cement hydration due to the hydraulic reactivity. Grinding the bio ash improved its pozzolanic reactivity by 25% as per the modified Chapelle test. Using bio ash as SCM was also found to increase the ettringite formation in cement matrix. Nevertheless, the potential of excessive expansion of the paste samples due to the ettringite formation was found to be negligible.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Available items include data presented in all figures and tables.
Acknowledgments
The Maine Technology Institute (MTI) and Born Global, Portland, Maine, are gratefully acknowledged for providing the financial support required for this study.
References
Aprianti, E., P. Shafigh, S. Bahri, and J. N. Farahani. 2015. “Supplementary cementitious materials origin from agricultural wastes—A review.” Constr. Build. Mater. 74 (Jan): 176–187. https://doi.org/10.1016/j.conbuildmat.2014.10.010.
Aprianti, S. E. 2017. “A huge number of artificial waste material can be supplementary cementitious material (SCM) for concrete production—A review part II.” J. Cleaner Prod. 142 (Part 4): 4178–4194. https://doi.org/10.1016/j.jclepro.2015.12.115.
ASTM. 2014a. Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency. ASTM C305. West Conshohocken, PA: ASTM.
ASTM. 2014b. Standard specification for flow table for use in tests of hydraulic cement. ASTM C230. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard test methods for impact resistance of Plastic film by the free-falling dart method. ASTM D1709. West Conshohocken, PA: ASTM.
ASTM. 2019. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM C618. West Conshohocken, PA: ASTM.
ASTM. 2020. Standard test method for compressive strength of hydraulic cement mortars [using 2-in. (50-mm) cube specimens]. ASTM C109. West Conshohocken, PA: ASTM.
Atis, C. D. 2002. “Heat evolution of high-volume fly ash concrete.” Cem. Concr. Res. 32 (5): 751–756. https://doi.org/10.1016/S0008-8846(01)00755-4.
Avet, F., R. Snellings, A. Alujas Diaz, M. B. Haha, and K. Scrivener. 2016. “Development of a new rapid, relevant and reliable () test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays.” Cem. Concr. Res. 85 (Jul): 1–11. https://doi.org/10.1016/j.cemconres.2016.02.015.
Bentz, D. P., and C. F. Ferraris. 2010. “Rheology and setting of high volume fly ash mixtures.” Cem. Concr. Compos. 32 (4): 265–270. https://doi.org/10.1016/j.cemconcomp.2010.01.008.
Berra, M., T. Mangialardi, and A. E. Paolini. 2015. “Reuse of woody biomass fly ash in cement-based materials.” Constr. Build. Mater. 76 (Feb): 286–296. https://doi.org/10.1016/j.conbuildmat.2014.11.052.
Bertolini, L. 2004. “MSWI ashes as mineral additions in concrete.” Cem. Concr. Res. 34 (10): 1899–1906. https://doi.org/10.1016/j.cemconres.2004.02.001.
Biomass Magazine. 2019. “U.S. biomass power plants.” Accessed October 16, 2019. http://biomassmagazine.com/plants/listplants/biomass/US/.
Bonavetti, V. L., V. F. Rahhal, and E. F. Irassar. 2001. “Studies on the carboaluminate formation in limestone filler-blended cements.” Cem. Concr. Res. 31 (6): 853–859. https://doi.org/10.1016/S0008-8846(01)00491-4.
Brown, R. C., and J. Dykstra. 1995. “Systematic errors in the use of loss-on-ignition to measure unburned carbon in fly ash.” Fuel 74 (4): 570–574. https://doi.org/10.1016/0016-2361(95)98360-Q.
Caprai, V., F. Gauvin, K. Schollbach, and H. J. H. Brouwers. 2019. “MSWI bottom ash as binder replacement in wood cement composites.” Constr. Build. Mater. 196 (Jan): 672–680. https://doi.org/10.1016/j.conbuildmat.2018.11.153.
Chowdhury, S., M. Mishra, and O. Suganya. 2015. “The incorporation of wood waste ash as a partial cement replacement material for making structural grade concrete: An overview.” Ain Shams Eng. J. 6 (2): 429–437. https://doi.org/10.1016/j.asej.2014.11.005.
Diaz-Loya, I., M. Juenger, and S. Seraj. 2017. “Extending supplementary cementitious material resources: Reclaimed and remediated fly ash and natural pozzolans.” Cem. Concr. Compos. 101 (Aug): 44–51. https://doi.org/10.1016/j.cemconcomp.2017.06.011.
EIA (US Energy Information Administration). 2013. “The cement industry is the most energy intensive of all manufacturing industries.” Accessed October 16, 2019. https://www.eia.gov/todayinenergy/detail.php?id=11911#.
EIA (US Energy Information Administration). 2016. “Biomass and waste fuels made up 2% of total U.S. electricity generation in 2016.” Accessed October 16, 2019. https://www.eia.gov/todayinenergy/detail.php?id=33872.
French Standard. 2012. Métakaolin, addition pouzzolanique pour bétons: définitions, spécifi- cation, critères de conformité. Paris: Association Francaise de Normalisation.
Grau, F., H. Choo, J. W. Hu, and J. Jung. 2015. “Engineering behavior and characteristics of wood ash and sugarcane bagasse ash.” Materials 8 (10): 6962–6977. https://doi.org/10.3390/ma8105353.
James, A. K., R. W. Thring, S. Helle, and H. S. Ghuman. 2012. “Ash management review—Applications of biomass bottom ash.” Energies 5 (10): 3856–3873. https://doi.org/10.3390/en5103856.
Joseph, A. M., N. Alderete, Y. V. Zaccardi, and N. De Belie. 2018. “Comparison of reactivity tests on Pozzolanic materials.” In Proc., Int. Symp. on Inorganic and Environmental Materials 2018. Ghent, Belgium: Book of Abstracts.
Jun-Yuan, H., B. E. Scheetz, and D. M. Roy. 1984. “Hydration of fly ash-portland cements.” Cem. Concr. Res. 14 (4): 505–512. https://doi.org/10.1016/0008-8846(84)90126-1.
Khan, R. I., and W. Ashraf. 2019. “Effects of ground wollastonite on cement hydration kinetics and strength development.” Constr. Build. Mater. 218 (Sep): 150–161. https://doi.org/10.1016/j.conbuildmat.2019.05.061.
Külaots, I., A. Hsu, R. H. Hurt, and E. M. Suuberg. 2003. “Adsorption of surfactants on unburned carbon in fly ash and development of a standardized foam index test.” Cem. Concr. Res. 33 (12): 2091–2099. https://doi.org/10.1016/S0008-8846(03)00232-1.
Laskar, A. I., and S. Alukdar. 2008. “Rheological behavior of high performance concrete with mineral admixtures and their blending.” Constr. Build. Mater. 22 (12): 2345–2354. https://doi.org/10.1016/j.conbuildmat.2007.10.004.
Latifi, N., A. Marto, A. S. A. Rashid, and J. L. J. Yii. 2015. “Strength and physico-chemical characteristics of fly ash–bottom ash mixture.” Arab. J. Sci. Eng. 40 (9): 2447–2455. https://doi.org/10.1007/s13369-015-1647-4.
Lin, K. L., and D. F. Lin. 2006. “Hydration characteristics of municipal solid waste incinerator bottom ash slag as a pozzolanic material for use in cement.” Cem. Concr. Compos. 28 (9): 817–823. https://doi.org/10.1016/j.cemconcomp.2006.03.003.
Liu, B., Y. Xie, S. Zhou, and Q. Yuan. 2000. “Influence of ultrafine fly ash composite on the fluidity and compressive strength of concrete.” Cem. Concr. Res. 30 (9): 1489–1493. https://doi.org/10.1016/S0008-8846(00)00323-9.
Lothenbach, B., K. Scrivener, and R. D. Hooton. 2011. “Supplementary cementitious materials.” Cem. Concr. Res. 41 (12): 1244–1256. https://doi.org/10.1016/j.cemconres.2010.12.001.
Mann, M. K., and P. L. Spath. 1999. “The Net emissions and energy balances of biomass and coal-fired power systems.” Accessed October 16, 2019. https://bioenergykdf.net/content/net-co2-emissions-and-energy-balances-biomass-and-coal-fired-power-systems.
Mehta, P. K. 1973. “Mechanism of expansion associated with ettringite formation.” Cem. Concr. Res. 3 (1): 1–6. https://doi.org/10.1016/0008-8846(73)90056-2.
Olek, J., A. Janusz, J. Jain, and W. Ashraf. 2013. Investigation of anti-icing chemicals and their interactions with pavement concretes. West Lafayette, IN: Joint Transportation Research Program, DOT and Purdue Univ.
Olivier, J., and J. Peters. 2018. Trends in global and total greenhouse gas emissions. The Hague, Netherlands: PBL Netherlands Environmental Assessment Agency.
Quarcioni, V. A., F. F. Chotoli, A. C. V. Coelho, and M. A. Cincotto. 2015. “Indirect and direct Chapelle’s methods for the determination of lime consumption in pozzolanic materials.” IBRACON Struct. Mater. J. 8 (1): 1–7. https://doi.org/10.1590/S1983-41952015000100002.
Ramos, T., A. M. Matos, and J. Sousa-Coutinho. 2013. “Mortar with wood waste ash: Mechanical strength carbonation resistance and ASR expansion.” Constr. Build. Mater. 49 (Dec): 343–351. https://doi.org/10.1016/j.conbuildmat.2013.08.026.
Rong, Z. D., W. Sun, H. J. Xiao, and W. Wang. 2014. “Effect of silica fume and fly ash on hydration and microstructure evolution of cement-based composites at low water–binder ratios.” Constr. Build. Mater. 51 (Jan): 446–450. https://doi.org/10.1016/j.conbuildmat.2013.11.023.
Scrivener, K., R. Snellings, and B. Lothenbach. 2016. A practical guide to microstructural analysis of cementitious materials. Boca Raton, FL: CRC Press.
Seraj, S., R. Cano, R. D. Ferron, and M. C. G. Juenger. 2017. “The role of particle size on the performance of pumice as a supplementary cementitious material.” Cem. Concr. Compos. 80 (Jul): 135–142. https://doi.org/10.1016/j.cemconcomp.2017.03.009.
Shafigh, P., H. B. Mahmud, M. Z. Jumaat, and M. Zargar. 2014. “Agricultural wastes as aggregate in concrete mixtures—A review.” Constr. Build. Mater. 53 (Feb): 110–117. https://doi.org/10.1016/j.conbuildmat.2013.11.074.
Siddique, R. 2010. “Utilization of municipal solid waste (MSW) ash in cement and mortar.” Resour. Conserv. Recycl. 54 (12): 1037–1047. https://doi.org/10.1016/j.resconrec.2010.05.002.
Siddique, R. 2012. “Utilization of wood ash in concrete manufacturing.” Resour. Conserv. Recycl. 67 (Oct): 27–33. https://doi.org/10.1016/j.resconrec.2012.07.004.
Sigvardsen, N. M., and L. M. Ottosen. 2019. “Characterization of coal bio ash from wood pellets and low-alkali coal fly ash and use as partial cement replacement in mortar.” Cem. Concr. Compos. 95 (Jan): 25–32. https://doi.org/10.1016/j.cemconcomp.2018.10.005.
Singh, N., P. Kumar, and P. Goyal. 2019. “Reviewing the behavior of high volume fly ash based self compacting concrete.” J. Build. Eng. 26 (Nov): 100882. https://doi.org/10.1016/j.jobe.2019.100882.
Teixeira, E. R., R. Mateus, A. Camões, and F. G. Branco. 2019. “Quality and durability properties and life-cycle assessment of high volume biomass fly ash mortar.” Constr. Build. Mater. 197 (Feb): 195–207. https://doi.org/10.1016/j.conbuildmat.2018.11.173.
Teixeira, T. R., et al. 2017. “Forest biomass power plant installation scenarios.” Biomass Bioenergy 108 (Jan): 35–47. https://doi.org/10.1016/j.biombioe.2017.10.006.
Termkhajornkit, P., T. Nawa, M. Nakai, and T. Saito. 2005. “Effect of fly ash on autogenous shrinkage.” Cem. Concr. Res. 35 (3): 473–482. https://doi.org/10.1016/j.cemconres.2004.07.010.
Thomas, M. 2011. “The effect of supplementary cementing materials on alkali-silica reaction: A review.” Cem. Concr. Res. 41 (12): 1224–1231. https://doi.org/10.1016/j.cemconres.2010.11.003.
Udoeyo, F. F., H. Inyang, D. T. Young, and E. E. Oparadu. 2006. “Potential of wood waste ash as an additive in concrete.” J. Mater. Civ. Eng. 4 (18): 605–611. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:4(605).
Vamvuka, D., and E. Kakaras. 2011. “Ash properties and environmental impact of various biomass and coal fuels and their blends.” Fuel Process. Technol. 92 (3): 570–581. https://doi.org/10.1016/j.fuproc.2010.11.013.
Wang, K. S., K. L. Lin, and Z. Q. Huang. 2001. “Hydraulic activity of municipal solid waste incinerator fly-ash-slag-blended eco-cement.” Cem. Concr. Res. 31 (1): 97–103. https://doi.org/10.1016/S0008-8846(00)00423-3.
Weng, J. K., B. W. Langan, and M. Ward. 1997. “Pozzolanic reaction in portland cement, silica fume, and fly ash mixtures.” Can. J. Civ. Eng. 24 (5): 754–760. https://doi.org/10.1139/l97-025.
Wyrzykowski, M., Z. Hu, S. Ghourchian, K. Scrivener, and P. Lura. 2017. “Corrugated tube protocol for autogenous shrinkage measurements: Review and statistical assessment.” Mater. Struct. 50 (1): 1–14. https://doi.org/10.1617/s11527-016-0933-2.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jul 29, 2019
Accepted: May 21, 2020
Published online: Sep 24, 2020
Published in print: Dec 1, 2020
Discussion open until: Feb 24, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.