Strength and Fracture Behavior of Rammed-Earth Materials
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 10
Abstract
Rammed-earth (RE) structures are becoming popular because of their sustainability, environment-friendly, and economic advantages. Various studies have investigated the mechanical behavior and energy performance of rammed-earth materials. However, little is known about their fracture behavior. In this study, the fracture properties of RE materials containing different percentages of various stabilizers were investigated using a modified wedge splitting test (WST). The stabilizers were cement, pozzolan, microsilica, glass fiber, guar gum, and phase change material (PCM). Additionally, the effects of these stabilizers on microstructure and phase composition were analyzed using scanning electron microscopy (SEM) and X-ray powder diffraction (XRD), respectively. The results indicated that cement and pozzolan, depending on the pozzolanic reaction, increased the strength of the microstructure while glass fibers led to internal confinement and high ductility that increased the fracture energy of RE materials. However, the phase change material and guar gum reduced the strength and fracture energy of the RE materials. Finally, a statistically significant correlation was obtained between specific fracture energy and other mechanical properties, pointing the way to proper approaches to improve crack resistance of rammed-earth materials.
Get full access to this article
View all available purchase options and get full access to this article.
References
Arrigoni, A., C. Beckett, D. Ciancio, and G. Dotelli. 2017. “Life cycle analysis of environmental impact vs. durability of stabilised rammed earth.” Constr. Build. Mater. 142 (Jul): 128–136. https://doi.org/10.1016/j.conbuildmat.2017.03.066.
ASTM. 2012. Standard test methods for laboratory compaction characteristics of soil using standard effort ( ()). ASTM D698-12e2. West Conshohocken, PA: ASTM.
ASTM. 2015a. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM C618. West Conshohocken, PA: ASTM.
ASTM. 2015b. Standard specification for silica fume used in cementitious mixtures. ASTM C1240. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test method for unconfined compressive strength of cohesive soil. ASTM D2166/D2166M. West Conshohocken, PA: ASTM.
ASTM. 2017a. Standard practice for classification of soils for engineering purposes (unified soil classification system). ASTM D2487. West Conshohocken, PA: ASTM.
ASTM. 2017b. Standard test method for splitting tensile strength of cylindrical concrete specimens. ASTM C496/C496M. West Conshohocken, PA: ASTM.
Aymerich, F., L. Fenu, L. Francesconi, and P. Meloni. 2016. “Fracture behaviour of a fibre reinforced earthen material under static and impact flexural loading.” Constr. Build. Mater. 109 (Apr): 109–119. https://doi.org/10.1016/j.conbuildmat.2016.01.046.
Aymerich, F., L. Fenu, and P. Meloni. 2012. “Effect of reinforcing wool fibres on fracture and energy absorption properties of an earthen material.” Constr. Build. Mater. 27 (1): 66–72. https://doi.org/10.1016/j.conbuildmat.2011.08.008.
Binici, H., O. Aksogan, D. Bakbak, H. Kaplan, and B. Isik. 2009. “Sound insulation of fibre reinforced mud brick walls.” Constr. Build. Mater. 23 (2): 1035–1041. https://doi.org/10.1016/j.conbuildmat.2008.05.008.
Binici, H., O. Aksogan, M. N. Bodur, E. Akca, and S. Kapur. 2007. “Thermal isolation and mechanical properties of fibre reinforced mud bricks as wall materials.” Constr. Build. Mater. 21 (4): 901–906. https://doi.org/10.1016/j.conbuildmat.2005.11.004.
Bouhicha, M., F. Aouissi, and S. Kenai. 2005. “Performance of composite soil reinforced with barley straw.” Cem. Concr. Compos. 27 (5): 617–621. https://doi.org/10.1016/j.cemconcomp.2004.09.013.
Brühwiler, E., and F. H. Wittmann. 1990. “The wedge splitting test, a new method of performing stable fracture mechanics tests.” Eng. Fract. Mech. 35 (1–3): 117–125. https://doi.org/10.1016/0013-7944(90)90189-N.
Bui, Q. B., J. C. Morel, B. V. Venkatarama Reddy, and W. Ghayad. 2009. “Durability of rammed earth walls exposed for 20 years to natural weathering.” Build. Environ. 44 (5): 912–919. https://doi.org/10.1016/j.buildenv.2008.07.001.
Bui, T. T., Q. B. Bui, A. Limam, and J. C. Morel. 2016. “Modeling rammed earth wall using discrete element method.” Continuum Mech. Thermodyn. 28 (1–2): 523–538. https://doi.org/10.1007/s00161-015-0460-3.
Burroughs, S. 2008. “Soil property criteria for rammed earth stabilization.” J. Mater. Civ. Eng. 20 (3): 264–273. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:3(264).
Ciancio, D., P. Jaquin, and P. Walker. 2013. “Advances on the assessment of soil suitability for rammed earth.” Constr. Build. Mater. 42 (May): 40–47. https://doi.org/10.1016/j.conbuildmat.2012.12.049.
Clementi, F., S. Lenci, and T. Sadowski. 2008. “Fracture characteristics of unfired earth.” Int. J. Fract. 149 (2): 193–198. https://doi.org/10.1007/s10704-008-9239-x.
Corbin, A., and C. Augarde. 2014. “Fracture energy of stabilised rammed earth.” Procedia Mater. Sci. 33: 1675–1680. https://doi.org/10.1016/j.mspro.2014.06.270.
Cristelo, N., S. Glendinning, T. Miranda, D. Oliveira, and R. Silva. 2012. “Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth construction.” Constr. Build. Mater. 36 (Nov): 727–735. https://doi.org/10.1016/j.conbuildmat.2012.06.037.
Fernández-Jiménez, A., and A. Palomo. 2003. “Characterisation of fly ashes. Potential reactivity as alkaline cements.” Fuel 82 (18): 2259–2265. https://doi.org/10.1016/S0016-2361(03)00194-7.
Fernández-Jiménez, A., and A. Palomo. 2005. “Composition and microstructure of alkali activated fly ash binder: Effect of the activator.” Cem. Concr. Res. 35 (10): 1984–1992. https://doi.org/10.1016/j.cemconres.2005.03.003.
Galán-Marín, C., C. Rivera-Gómez, and J. Petric-Gray. 2010. “Effect of animal fibres reinforcement on stabilized earth mechanical properties.” J. Biobased Mater. Bioenergy 4 (2): 121–128. https://doi.org/10.1166/jbmb.2010.1076.
Gupta, R. 2014. “Characterizing material properties of cement-stabilized rammed earth to construct sustainable insulated walls.” Case Stud. Constr. Mater. 1: 60–68. https://doi.org/10.1016/j.cscm.2014.04.002.
Hall, M., and Y. Djerbib. 2004. “Rammed earth sample production: Context, recommendations and consistency.” Constr. Build. Mater. 18 (4): 281–286. https://doi.org/10.1016/j.conbuildmat.2003.11.001.
Jafari, K., and V. Toufigh. 2017. “Experimental and analytical evaluation of rubberized polymer concrete.” Constr. Build. Mater. 155 (Nov): 495–510. https://doi.org/10.1016/j.conbuildmat.2017.08.097.
Jaquin, P. A., C. E. Augarde, D. Gallipoli, and D. G. Toll. 2009. “The strength of unstabilised rammed earth materials.” Géotechnique 59 (5): 487–490. https://doi.org/10.1680/geot.2007.00129.
Kariyawasam, K. K. G. K. D., and C. Jayasinghe. 2016. “Cement stabilized rammed earth as a sustainable construction material.” Constr. Build. Mater. 105 (Feb): 519–527. https://doi.org/10.1016/j.conbuildmat.2015.12.189.
Kianfar, E., and V. Toufigh. 2016. “Reliability analysis of rammed earth structures.” Constr. Build. Mater. 127 (Nov): 884–895. https://doi.org/10.1016/j.conbuildmat.2016.10.052.
Kuznik, F., J. P. Arzamendia Lopez, D. Baillis, and K. Johannes. 2015. “Phase change material wall optimization for heating using metamodeling.” Energy Build. 106 (Nov): 216–224. https://doi.org/10.1016/j.enbuild.2015.06.021.
Lenci, S., F. Clementi, and T. Sadowski. 2012. “Experimental determination of the fracture properties of unfired dry earth.” Eng. Fract. Mech. 87 (Jun): 62–72. https://doi.org/10.1016/j.engfracmech.2012.03.005.
Ma, C., L. Chen, and B. Chen. 2016. “Experimental study of effect of fly ash on self-compacting rammed earth construction stabilized with cement-based composites.” J. Mater. Civ. Eng. 28 (7): 04016022. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001518.
Massazza, F. 1998. “Pozzolana and pozzolanic cements.” Lea’s Chem. Cem. Concr. 4: 471–635. https://doi.org/10.1016/B978-075066256-7/50022-9.
Miccoli, L., U. Müller, and P. Fontana. 2014. “Mechanical behaviour of earthen materials: A comparison between earth block masonry, rammed earth and cob.” Constr. Build. Mater. 61: 327–339. https://doi.org/10.1016/j.conbuildmat.2014.03.009.
Miccoli, L., D. V. Oliveira, R. A. Silva, U. Müller, and L. Schueremans. 2015. “Static behaviour of rammed earth: Experimental testing and finite element modelling.” Mater. Struct. 48 (10): 3443–3456. https://doi.org/10.1617/s11527-014-0411-7.
Morel, J., A. Mesbah, M. Oggero, and P. Walker. 2001. “Building houses with local materials: Means to drastically reduce the environmental impact of construction.” Build. Environ. 36 (10): 1119–1126. https://doi.org/10.1016/S0360-1323(00)00054-8.
NZS (Standards New Zealand). 1998. Material and workmanship for earth buildings. NZS:4298. Wellington, New Zealand: NZS.
Pakand, M., and V. Toufigh. 2017. “A multi-criteria study on rammed earth for low carbon buildings using a novel ANP-GA approach.” Energy Build. 150 (Sep): 466–476. https://doi.org/10.1016/j.enbuild.2017.06.004.
Piattoni, Q., E. Quagliarini, and S. Lenci. 2011. “Experimental analysis and modelling of the mechanical behaviour of earthen bricks.” Constr. Build. Mater. 25 (4): 2067–2075. https://doi.org/10.1016/j.conbuildmat.2010.11.039.
Quagliarini, E., and S. Lenci. 2010. “The influence of natural stabilizers and natural fibres on the mechanical properties of ancient Roman adobe bricks.” J. Cult. Heritage 11 (3): 309–314. https://doi.org/10.1016/j.culher.2009.11.012.
Resketi, N. A., and V. Toufigh. 2019. “Enhancement of brick-mortar shear bond strength using environmental friendly mortars.” Constr. Build. Mater. 195 (Jan): 28–40. https://doi.org/10.1016/j.conbuildmat.2018.10.118.
Serrano, S., A. de Gracia, and L. F. Cabeza. 2016. “Adaptation of rammed earth to modern construction systems: Comparative study of thermal behavior under summer conditions.” Appl. Energy 175 (Aug): 180–188. https://doi.org/10.1016/j.apenergy.2016.05.010.
Taylor, P., R. J. Fuller, and M. B. Luther. 2008. “Energy use and thermal comfort in a rammed earth office building.” Energy Build. 40 (5): 793–800. https://doi.org/10.1016/j.enbuild.2007.05.013.
Toufigh, V., and E. Kianfar. 2019. “The effects of stabilizers on the thermal and the mechanical properties of rammed earth at various humidities and their environmental impacts.” Constr. Build. Mater. 200 (Mar): 616–629. https://doi.org/10.1016/j.conbuildmat.2018.12.050.
Tripura, D. D., and K. D. Singh. 2015. “Characteristic properties of cement-stabilized rammed earth blocks.” J. Mater. Civ. Eng. 27 (7): 04014214. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001170.
VanDamme, H., and H. Houben. 2018. “Earth concrete. Stabilization revisited.” Cem. Concr. Res. 114 (Dec): 90–102. https://doi.org/10.1016/j.cemconres.2017.02.035.
Venkatarama Reddy, B. V., and P. Prasanna Kumar. 2010. “Embodied energy in cement stabilised rammed earth walls.” Energy Build. 42 (3): 380–385. https://doi.org/10.1016/j.enbuild.2009.10.005.
Walker, P. 2002. The Australian earth building handbook. Sydney: SAI Global Limited.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 31 • Issue 10 • October 2019
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jan 8, 2019
Accepted: Apr 23, 2019
Published online: Jul 26, 2019
Published in print: Oct 1, 2019
Discussion open until: Dec 26, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.