Assessment of Direct Tension Tests on Compacted Sand-Clay Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 10
Abstract
The common laboratory tests for determining the tensile strength of soils can be categorized into direct and indirect methods. For direct methods, there are no standard testing apparatuses or procedures to measure the tensile strength of soils. This paper presents a modification of a direct tension apparatus and its test results on compacted soil. The major factors affecting tensile strength measurements include the size of the specimen, tensile displacement pulling rate, and the shape of the tensile apparatus mold. The effect of the tensile displacement pulling rate and the behavior of crack propagation due to the shapes of the direct tension mold were investigated. Three wedge types (triangular, trapezoidal, and rectangular) were used in the tests. Particle image velocimetry (PIV) technique was adopted to capture the crack propagation along with the development of tensile stress and to evaluate the wedges suitability. In addition, tests were conducted to measure the tensile strength of soils with different specimen depths and cross-sectional areas. The results show that there was no significant influence of the displacement rate associated with tensile force, crack propagation, and maximum tensile force. Triangular wedges are the best pick for direct tension tests. Tensile strength was found to be size dependent; the cross-sectional area and specimen depth govern the tensile strength of compacted soil mixture. However, it was found that the tensile strength was close to a constant when the area ratio exceeds a critical value.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adrian, R. J. 1991. “Particle imaging techniques for experimental fluid mechanics.” Ann. Rev. Fluid Mech. 23 (1): 261–304. https://doi.org/10.1146/annurev.fl.23.010191.001401.
ASTM. 2007. Standard test method for particle-size analysis of soils. ASTM D422-63. West Conshohocken, PA: ASTM.
ASTM. 2011. Standard test method for direct shear test of soils under consolidated drained conditions. ASTM D3080/D3080M. West Conshohocken, PA: ASTM.
ASTM. 2014a. Standard test methods for laboratory compaction characteristics of soil using standard effort. ASTM D698-12. West Conshohocken, PA: ASTM.
ASTM. 2014b. Standard test methods for liquid limit, plastic limit, and plasticity index of soils. ASTM D4318-10. West Conshohocken, PA: ASTM.
ASTM. 2014c. Standard test methods for specific gravity of soil solids by water pycnometer. ASTM D854-14. West Conshohocken, PA: ASTM.
Chen, W. F. 1969. Double punch test for tensile strength of concrete, Sept. 1969 (70-18) PB224770/AS (NTIS). Bethlehem, PA: Lehigh Univ.
Chen, W. F., and B. E. Ttumbauer. 1972. “Double-punch test and tensile strength of concrete.” J. Mater. 7 (2): 148–154.
Chen, W. F., and R. L. Yuan. 1980. “Tensile strength of concrete: Double punch test.” J. Struct. Div. 106 (8): 1673–1693.
Das, B. M., and R. N. Dass. 1995. “Lightly cemented sand in tension and compression.” Geotech. Geol. Eng. 13 (3): 169–177. https://doi.org/10.1007/BF00456716.
Fang, H. Y., and F. Fernandez. 1981. “Determination of tensile strength of soils by unconfined-penetration test.” In Laboratory shear strength of soil: ASTM STP 740, 130–144. Philadelphia: ASTM.
Kim, T. H., and S. Sture. 2008. “Capillary-induced tensile strength in unsaturated sands.” Can. Geotech. J. 45 (5): 726–737. https://doi.org/10.1139/T08-017.
Kim, T.-H., T.-H. Kim, G.-C. Kang, and L. Ge. 2012. “Factors influencing crack-induced tensile strength of compacted soil.” J. Mater. Civ. Eng. 24 (3): 315–320. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000380.
Krishnayya, A. V. G., Z. Eisenstein, and N. R. Morgenstern. 1974. “Behavior of compacted soil in tension.” J. Geotech. Geoenviron. Eng. 100 (GT9): 1051–1060.
Nahlwwi, H., S. Chakrabarti, and J. Kodikara. 2004. “A direct tensile strength testing method for unsaturated gromaterials.” Geotech. Test. J. 27 (4): 356–361. https://doi.org/10.1520/GTJ11767.
Narain, J., and P. C. Rawat. 1970. “Tensile strength of compacted soils.” J. Soil Mech. Found. Div. 96 (SM6): 2185–2190.
Perkins, S. W. 1991. “Modeling of regolith structure interaction in extraterrestrial constructed facilities.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Colorado Boulder.
Sasaki, Y., N. Inagawa, K. Saito, Y. Tobita, and A. Yamaguchi. 2003. “Development of tensile strength apparatus and problems during test.” [In Japanese.] In Proc., Conf. on Japan Society of Civil Engineers, 386–387. Tokyo: Japan Society of Civil Engineers.
Spencer, E. 1968. “Effect of tension of stability of embankment.” J. Soil Mech. Found. Div. 94 (SM5): 1159–1173.
Suklje, L. 1969. “Tensile and bending strength of soil.” In Rheological aspects of soil mechanics, 456–473. London: Wiley.
Take, W. A. 2002. “The influence seasonal moisture cycles on clay slopes.” Ph.D. dissertation, Dept. of Engineering, Univ. of Cambridge.
Tamrakar, S. B., T. Mitachi, and T. Yasuo. 2007. “Measurement of soil tensile strength and factors affecting its measurements.” Soils Found. 47 (5): 911–918. https://doi.org/10.3208/sandf.47.911.
Tamrakar, S. B., Y. Toyosawa, T. Mitachi, and K. Itoh. 2005. “Tensile strength of compacted and saturated soils using newly developed tensile strength measuring apparatus.” Soils Found. 45 (6): 103–110. https://doi.org/10.3208/sandf.45.103.
Tang, G. X., and J. Graham. 2000. “A method for testing tensile strength in unsaturated soils.” Geotech. Test. J. 23 (3): 377–382. https://doi.org/10.1520/GTJ11059J.
White, D. J., W. A. Take, and M. D. Bolton. 2001a. “Measuring soil deformation in geotechnical models using digital images and PIV analysis.” In Proc., 10th Int. Conf. on Computer Methods and Advances in Geomechanics, 997–1002. Rotterdam, Netherlands: A.A. Balkema.
White, D. J., W. A. Take, and M. D. Bolton. 2003. “Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry.” Geotechnique 53 (7): 619–631. https://doi.org/10.1680/geot.2003.53.7.619.
White, D. J., W. A. Take, M. D. Bolton, and S. E. Munachen. 2001b. “A deformation measuring system for geotechnical testing based on digital imaging, close-range photogrammetry, and PIV image analysis.” In Proc., 15th Int. Conf. on Soil Mechanics and Geotechnical Engineering, 539–542. Rotterdam, Netherlands: A.A. Balkema.
Zeh, R. M., and K. J. Witt. 2007. “The tensile strength of compacted clays as affected by suction and structure.” In Vol. 112 of Experimental unsaturated soil mechanics, 219–226. New York: Springer.
Zhang, B. Y., Q. M. Li, H. N. Yuan, and X. Sun. 2015. “Tensile fracture characteristics of compacted soils under uniaxialtension.” J. Civ. Eng. 27 (10): 04014274. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001250.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 31 • Issue 10 • October 2019
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jun 21, 2018
Accepted: Apr 17, 2019
Published online: Jul 30, 2019
Published in print: Oct 1, 2019
Discussion open until: Dec 30, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.