Impact Assessment of Plastic Strips on Compressive Strength of Concrete
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 8
Abstract
This work attempts to analyze the impact of plastic strips on the compressive strength of concrete. Three sets of concrete mixes, one of conventional concrete (CC) and the other two modified concrete with plastic [polyethylene terephthalate (PET)] strips, viz., horizontally oriented plastic strips (MC-H) and randomly oriented plastic strips (MC-R) were tested. Load and deflection controlled analyses show the PET strips as contributing toward 5%–15% enhancement in compressive strength and a substantial reduction in the standard deviation (60%–65%). Further, modified concrete in comparison with conventional concrete exhibits higher stiffness and the early arrival of peak load with relatively steeper response in the postpeak regime. An analytical model attempting to quantify the role of PET strips in offering confinement is proposed in the study. The model describes the contribution of PET in terms of confinement stress and is used to justify early arrival of peak load. It also closely predicts the inclination of failure plane. This study reveals the positive role of PET strips in controlling heterogeneity in concrete behavior, increasing stiffness, and attaining early peak load.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACAA (American Coal Ash Association). 2010. Coal combustion product (CCP): Production and use statistics. ACAA 2001-2009 1. Aurora, CO: ACAA.
ACI (American Concrete Institute). 2014. Building code requirement for structural concrete and commentary. ACI 318. Farmington Hills, MI: ACI.
ASTM. 2002. Standard test method for tensile properties of thin plastic sheeting. ASTM D882. West Conshohocken, PA: ASTM.
ASTM. 2003a. Standard practice for heat aging of plastics without load. ASTM D3045-92. West Conshohocken, PA: ASTM.
ASTM. 2003b. Standard specification for concrete aggregates. ASTM C33. West Conshohocken, PA: ASTM.
ASTM. 2003c. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39M. West Conshohocken, PA: ASTM.
ASTM. 2007. Standard specification for portland cement. ASTM C150. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test method for slump of hydraulic cement concrete. ASTM C143M. West Conshohocken, PA: ASTM.
Auchey, F. L., and P. K. Dutta. 2013. “Use of recycled high density polyethylene fibres as secondary reinforcement in concrete subjected to severe environment.” In Proc., Int. Offshore Polar Engineers Conf., 287–291. Mountain View, CA: International Society of Offshore and Polar Engineers.
Batayneh, M., I. Marie, and I. Asi. 2007. “Use of selected waste materials in concrete mixes.” Waste Manage. 27 (12): 1870–1876. https://doi.org/10.1016/j.wasman.2006.07.026.
Bentz, D. P., J. Tanesi, and A. Ardani. 2013. “Ternary blends for controlling cost and carbon content.” Concr. Int. 35 (8): 51–61.
BIS (Bureau of Indian Standards). 1959. Method of tests for strength of concrete. IS 516. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 1963. Method of tests for aggregate for concrete. IS 2386-Part 1. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 1997. Specification for coarse and fine aggregate from natural sources for concrete. IS 383-1970. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2000. Plain and reinforced concrete-Code of practice. IS 456. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2013. Ordinary portland cement, 43 grade-specification. IS 8112. New Delhi, India: BIS.
Boden, T. A., G. Marland, and R. J. Andres. 2010. “Global, regional and national fossil fuel CO2 emissions.” In Carbon dioxide information analysis, 425–441. Oak Ridge, TN: Oak Ridge National Laboratory.
Choi, Y. W., D. J. Moon, J. S. Chumg, and S. K. Cho. 2005. “Effect of waste PET bottles aggregate on the properties of concrete.” Cem. Concr. Res. 35 (4): 776–781. https://doi.org/10.1016/j.cemconres.2004.05.014.
Erdem, T. K., and O. Kirca. 2008. “Use of binary and ternary blends in high strength concrete.” Constr. Build. Mater. 22 (7): 1477–1483. https://doi.org/10.1016/j.conbuildmat.2007.03.026.
Foti, D. 2011. “Preliminary analysis of concrete reinforced with waste bottles PET fibers.” Constr. Build. Mater. 25 (4): 1906–1915. https://doi.org/10.1016/j.conbuildmat.2010.11.066.
Foti, D. 2013. “Use of recycled waste PET bottles fibers for the reinforcement of concrete.” Compos. Struct. 96: 396–404. https://doi.org/10.1016/j.compstruct.2012.09.019.
Fraternali, F., V. Ciancia, R. Chechile, G. Rizzano, L. Feo, and L. Incarnato. 2011. “Experimental study of thermo-mechanical properties of recycled PET fiber-reinforced concrete.” Compos. Struct. 93 (9): 2368–2374. https://doi.org/10.1016/j.compstruct.2011.03.025.
Irwan, J., R. Asyraf, N. Othman, H. Koh, M. Annas, and S. K. Faisal. 2013. “The mechanical properties of PET fiber reinforced concrete from recycled bottle wastes.” Adv. Mater. Res. 795: 347–351. https://doi.org/10.4028/www.scientific.net/AMR.795.347.
Jansen, D. C., and S. P. Shah. 1997. “Effect of length of compressive strain softening of concrete.” J. Eng. Mech. 123 (1): 25–35. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:1(25).
Kakooei, S., H. M. Akil, M. Jamshidi, and J. Rouhi. 2012. “The effects of polypropylene fibers on the properties of reinforced concrete structures.” Constr. Build. Mater. 27 (1): 73–77. https://doi.org/10.1016/j.conbuildmat.2011.08.015.
Kim, S. B., N. H. Yi, H. Y. Kim, J.-H. JayKim, and Y. C. Song. 2010. “Material and structural performance evaluation of recycled PET fiber reinforced concrete.” Cem. Concr. Compos. 32 (3): 232–240. https://doi.org/10.1016/j.cemconcomp.2009.11.002.
Krishnamoorthy, M., D. Tensing, M. Sivaraja, and A. Krishnaraja. 2017. “Durability studies on polyethylene terephthalate (PET) fibre reinforced concrete.” Int. J. Civ. Eng. Technol. 8 (10): 634–640.
Liu, R., S. A. Durham, P. E. Kevin, L. Rens, and A. Ramaswami. 2012. “Optimization of cementitious material content for sustainable concrete mixtures.” Mater. Civ. Eng. 24 (6): 745–753. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000444.
Marthong, C., and D. K. Sarma. 2015. “Influence of PET fiber geometry on the mechanical properties of concrete: An experimental investigation.” Eur. J. Environ. Civ. Eng. 20 (7): 771–784. https://doi.org/10.1080/19648189.2015.1072112.
Pappu, A., M. Saxena, and S. Asolekar. 2007. “Solid waste generation in India and their recycling potential in building materials.” Build. Environ. 42 (6): 2311–2320. https://doi.org/10.1016/j.buildenv.2006.04.015.
Pesic, N., S. Zivanovic, R. Garcia, and P. Papastergiou. 2016. “Mechanical properties of concrete reinforced with recycled HDPE plastic fibres.” Constr. Build. Mater. 115: 362–370. https://doi.org/10.1016/j.conbuildmat.2016.04.050.
Roque, R. 2009. Durability of fibre-reinforced concrete in Florida environments. Tallahassee, FL: Florida DOT.
Shi, Y., T. Rabin, C. Mark, C. Tony, J. Mohan, and S. A. Robert. 2013. “Mechanical properties of recycled plastic fibres for reinforcing concrete.” In Proc., 7th Int. Conf. on Fibre Concrete. Prague, Czech Republic: Czech Technical Univ. in Prague.
Shivasundaram, V., G. G. Carette, and V. M. Malhotra. 1991. “Mechanical properties creep, and resistance to diffusion of chloride ions of concrete incorporating high volumes of ASTM Class f fly ashes from seven different sources.” ACI Mater. J. 88 (4): 407–416.
Swamy, R. N. 2008. “Sustainable concrete for the 21st century concept of strength through durability.” Japan Society of Civil Engineers Concrete Committee Newsletter, April, 2008.
Thorneycroft, J., J. Orr, P. Savoikar, and R. J. Ball. 2018. “Performance of structural concrete with recycled plastic waste as a partial replacement of sand.” Constr. Build. Mater. 161: 63–69. https://doi.org/10.1016/j.conbuildmat.2017.11.127.
Won, J. P., C. I. Jang, S. W. Lee, and H. Y. Kim. 2010. “Long term performance of recycled PET fibre-reinforced cement composites.” Constr. Build. Mater. 24 (5): 660–665. https://doi.org/10.1016/j.conbuildmat.2009.11.003.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jul 12, 2018
Accepted: Feb 4, 2019
Published online: May 23, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 23, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.