Mechanical and Damping Properties of Rubberized Concrete Containing Polyester Fibers
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 2
Abstract
Environmental sustainability is the need of the hour. The dependency on natural river sand has to be decreased, and an environment friendly disposal of waste rubber tires needs to be promoted. The application-specific properties of concrete such as damping or vibration absorbing capacity can be enhanced, by the use of scrap rubber tires as aggregates in concrete. This paper evaluates the feasibility of using shredded waste rubber as a partial replacement to fine aggregate, with respect to mass, by conducting investigations on its mechanical properties. In addition, the effect of polymeric fibers which is incorporated in rubberized concrete is probed. The reuse of waste rubber and fiber resulted in improved ductility and damping ratio; however, it reduced the strength values. At a maximum of 7.5% replacement in both plain rubberized and fiber reinforced rubberized concrete, the loss in strength percentage is within acceptable limits making it suitable for use as vibration attenuators in applications such as road curbs and barriers, paving blocks, trench filling, and machine foundations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Mr. Hanumantharaya J and Mr. Kabberu Vijay, former students at R V College of Engineering, Bengaluru, India, have assisted in the experimental work. Staff at R V College of Engineering, Bengaluru, India, are acknowledged for their help and support.
References
Aiello, M. A., and F. Leuzzi. 2010. “Waste tyre rubberized concrete: Properties at fresh and hardened state.” Waste Manage. (Oxford) 30 (8–9): 1696–1704. https://doi.org/10.1016/j.wasman.2010.02.005.
ASTM. 2012. Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. ASTM C1202. West Conshohocken, PA: ASTM.
Atahan, A. O., and A. Ö. Yücel. 2012. “Crumb rubber in concrete: Static and dynamic evaluation.” Constr. Build. Mater. 36: 617–622. https://doi.org/10.1016/j.conbuildmat.2012.04.068.
Bureau of Indian Standards. 1959a. Method of tests for strength of concrete. IS 516. New Delhi, India: Bureau of Indian Standards.
Bureau of Indian Standards. 1959b. Methods of sampling and analysis of concrete. IS 1199. New Delhi, India: Bureau of Indian Standards.
Bureau of Indian Standards. 1982. Specification for moulds for use in tests of cement and concrete. IS 10086. New Delhi, India: Bureau of Indian Standards.
Bureau of Indian Standards. 1999. Method of test splitting tensile strength of concrete. IS 5816. New Delhi, India: Bureau of Indian Standards.
Bureau of Indian Standards. 2009. Guidelines for concrete mix design proportioning. IS 10262. New Delhi, India: Bureau of Indian Standards.
Bureau of Indian Standards. 2013. Ordinary portland cement, 53 GRADE—SPECIFICATION. IS 12269. New Delhi, India: Bureau of Indian Standards.
Chen, H.-J., C.-H. Huang, and C.-W. Tang. 2010. “Dynamic properties of lightweight concrete beams made by sedimentary lightweight aggregate.” J. Mater. Civ. Eng. 22 (6): 599–606. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000061.
Dong, Q., B. Huang, and X. Shu. 2013. “Rubber modified concrete improved by chemically active coating and silane coupling agent.” Constr. Build. Mater. 48: 116–123. https://doi.org/10.1016/j.conbuildmat.2013.06.072.
Elchalakani, M., T. Aly, and E. Abu-Aisheh. 2016. “Mechanical properties of rubberised concrete for road side barriers.” Aust. J. Civ. Eng. 14 (1): 1–12. https://doi.org/10.1080/14488353.2015.1092631.
Güneyisi, E., M. Gesoğlu, and T. Özturan. 2004. “Properties of rubberized concretes containing silica fume.” Cem. Concr. Res. 34 (12): 2309–2317. https://doi.org/10.1016/j.cemconres.2004.04.005.
Huang, B., G. Li, S.-S. Pang, and J. Eggers. 2004. “Investigation into waste tire rubber-filled concrete.” J. Mater. Civ. Eng. 16 (3): 187–194. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:3(187).
Huang, B., X. Shu, and J. Cao. 2013. “A two-staged surface treatment to improve properties of rubber modified cement composites.” Constr. Build. Mater. 40: 270–274. https://doi.org/10.1016/j.conbuildmat.2012.11.014.
Jeon, E.-B., S. Ahn, I.-G. Lee, H.-I. Koh, J. Park, and H.-S. Kim. 2015. “Investigation of mechanical/dynamic properties of carbon fiber reinforced polymer concrete for low noise railway slab.” Compos. Struct. 134: 27–35. https://doi.org/10.1016/j.compstruct.2015.08.082.
Li, G., G. Garrick, J. Eggers, C. Abadie, M. A. Stubblefield, and S.-S. Pang. 2004a. “Waste tire fiber modified concrete.” Composites Part B 35 (4): 305–312. https://doi.org/10.1016/j.compositesb.2004.01.002.
Li, G., M. A. Stubblefield, G. Garrick, J. Eggers, C. Abadie, and B. Huang. 2004b. “Development of waste tire modified concrete.” Cem. Concr. Res. 34 (12): 2283–2289. https://doi.org/10.1016/j.cemconres.2004.04.013.
Malik, A. A. 2015. “A new testing arrangement for damping of concrete.” Tech. J., Univ. Eng. Technol. Taxila 20 (III): 74–79.
Marie, I. 2017. “Thermal conductivity of hybrid recycled aggregate: Rubberized concrete.” Constr. Build. Mater. 133: 516–524. https://doi.org/10.1016/j.conbuildmat.2016.12.113.
Moustafa, A., and M. A. ElGawady. 2015. “Mechanical properties of high strength concrete with scrap tire rubber.” Constr. Build. Mater. 93: 249–256. https://doi.org/10.1016/j.conbuildmat.2015.05.115.
Najim, K. B., and M. R. Hall. 2010. “A review of the fresh/hardened properties and applications for plain- (PRC) and self-compacting rubberised concrete (SCRC).” Constr. Build. Mater. 24 (11): 2043–2051. https://doi.org/10.1016/j.conbuildmat.2010.04.056.
Neville, A. M. 1996. Properties of concrete. Hoboken, NJ: Wiley.
Orak, S. 2000. “Investigation of vibration damping on polymer concrete with polyester resin.” Cem. Concr. Res. 30 (2): 171–174. https://doi.org/10.1016/S0008-8846(99)00225-2.
Shu, X., and B. Huang. 2014. “Recycling of waste tire rubber in asphalt and portland cement concrete: An overview.” Constr. Build. Mater. 67: 217–224. https://doi.org/10.1016/j.conbuildmat.2013.11.027.
Sofi, A. 2017. “Effect of waste tyre rubber on mechanical and durability properties of concrete: A review.” Ain Shams Eng. J., in press. https://doi.org/10.1016/j.asej.2017.08.007.
Swamy, N., and G. Rigby. 1971. “Dynamic properties of hardened paste, mortar, and concrete.” Matériaux et Constructions 4 (1): 13–40. https://doi.org/10.1007/BF02473927.
Tian, Y., S. Shi, K. Jia, and S. Hu. 2015. “Mechanical and dynamic properties of high strength concrete modified with lightweight aggregates presaturated polymer emulsion.” Constr. Build. Mater. 93: 1151–1156. https://doi.org/10.1016/j.conbuildmat.2015.05.015.
Topçu, İ. B., and T. Bilir. 2009. “Experimental investigation of some fresh and hardened properties of rubberized self-compacting concrete.” Mater. Des. 30 (8): 3056–3065. https://doi.org/10.1016/j.matdes.2008.12.011.
UNEP (United Nations Environment Programme). 2014. Sand, rarer than one thinks. Thematic focus: Ecosystem management, environmental governance, resource efficiency. Sioux Falls, SD: UNEP.
US Tire Manufacturers Association. 2017. 2015 U.S. scrap tire management summary. Washington, DC: US Tire Manufacturers Association.
Yan, L., C. Jenkins, and R. Pendleton. 2000. “Polyolefin fiber-reinforced concrete composites. Part I: Damping and frequency characteristics.” Cem. Concr. Res. 30 (3): 391–401. https://doi.org/10.1016/S0008-8846(99)00267-7.
Zheng, L., X. Sharon Huo, and Y. Yuan. 2008. “Experimental investigation on dynamic properties of rubberized concrete.” Constr. Build. Mater. 22 (5): 939–947. https://doi.org/10.1016/j.conbuildmat.2007.03.005.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jun 12, 2018
Accepted: Aug 22, 2018
Published online: Dec 10, 2018
Published in print: Feb 1, 2019
Discussion open until: May 10, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.