Characterization of Hydration Products’ Formation and Strength Development in Cement-Stabilized Kaolinite Using TG and XRD
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 10
Abstract
This study investigates the use of thermogravimetry (TG) and X-ray diffraction (XRD) to characterize and quantify the hydration products, particularly calcium silicate hydrate (CSH) and calcium hydroxide [], in stabilized soils and to establish correlations between these products and strength gain over time. A pure kaolinite is the soil for this study and portland cement is the selected stabilizer. Untreated and cement-stabilized samples are compacted at their optimum conditions and cured for different periods of up to 90 days. The unconfined compression test, which is a relatively simple and commonly used test, is performed to measure the unconfined compressive strength (UCS) for all the samples and record the macroscopic behavior. A portion of soil from each set of samples is recovered and subsequently subjected to the TG test coupled with mass spectrometry (MS) and XRD. Using TG, the amounts of CSH (mass loss between 105 and 440°C) and calcium hydroxide (mass loss between 440 and 580°C) are measured and monitored with time to establish their correlation with strength gain. Quantitative XRD using whole-pattern fitting (Rietveld analysis) and the reference intensity ratio (RIR) indicated that the amount of kaolinite decreases logarithmically with curing time and a strong linear correlation is observed between the amount of kaolinite and the unconfined compression strength.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support for this research was jointly provided by the National Science Foundation (NSF) Grant No. 0923247, the Oklahoma Department of Transportation (ODOT) SPR Grant No. 2241, the Southern Plains Transportation Center (SPTC) Grant No. 14.2-2, and the University of Oklahoma Research Council’s Faculty Investment Program. This support is greatly appreciated. “This work was, in part, supported by NSF Award 0923247.”
References
Alarcon-Ruiz, L., G. Platret, E. Massieu, and A. Ehrlacher. 2005. “The use of thermal analysis in assessing the effect of temperature on a cement paste.” Cem. Concr. Res. 35 (3): 609–613. https://doi.org/10.1016/j.cemconres.2004.06.015.
Al-Rawas, A. A. 1999. “The factors controlling the expansive nature of the soils and rocks of Northern Oman.” Eng. Geol. 53 (3–4): 327–350. https://doi.org/10.1016/S0013-7952(98)00085-4.
Al-Rawas, A. A. 2002. “Microfabric and mineralogical studies on the stabilization of an expansive soil using cement by-pass dust and some types of slags.” Can. Geotech. J. 39 (5): 1150–1167. https://doi.org/10.1139/t02-046.
Aranda, M. A. G., A. G. De la Torre, and L. León-Reina. 2012. “Rietveld quantitative phase analysis of OPC clinkers, cements and hydration products.” Rev. Mineral. Geochem. 74 (1): 169–209. https://doi.org/10.2138/rmg.2012.74.5.
ASTM. 2011. Standard test method for unconfined compressive strength of cohesive soil. ASTM D2166. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard test method for determination of the proportion of phases in portland cement and portland-cement clinker using X-ray powder diffraction analysis. ASTM C1365. West Conshohocken, PA: ASTM.
Brandon, T. L., J. J. Brown, W. L. Daniels, T. L. DeFazio, G. M. Filz, J. K. Mitchell, J. Musselman, and C. Forsha. 2009. Rapid stabilization/polymerization of wet clay soils: Literature review. Blacksburg, VA: Air Force Research Laboratory.
Cerato, A. B., and G. A. Miller. 2013. “Determination of soil stabilizer content using X-ray fluorescence.” Geotech. Test. J. 36 (5): 781–785. https://doi.org/10.1520/GTJ20120186.
Cheng, H., J. Yang, Q. Liu, J. He, and R. L. Frost. 2010. “Thermogravimetric analysis-mass spectrometry (TG-MS) of selected Chinese kaolinites.” Thermochimica Acta 507: 106–114. https://doi.org/10.1016/j.tca.2010.05.007.
Choquette, M., M. Bérubéa, and J. Locat. 1987. “Mineralogical and microtextural changes associated with lime stabilization of marine clays from Eastern Canada.” Appl. Clay Sci. 2 (3): 215–232. https://doi.org/10.1016/0169-1317(87)90032-9.
Chrysochoou, M. 2014. “Investigation of the mineral dissolution rate and strength development in stabilized soils using quantitative X-ray diffraction.” J. Mater. Civ. Eng. 26 (2): 288–295. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000814.
Circeo, L. J., D. T. Davidson, and H. T. David. 1962. “Strength-maturity relations of soil-cement mixtures.” In Proc., 41st Annual Meeting of the Highway Research Board, 84–97. Washington, DC: National Academy of Sciences.
De La Torre, A. G., S. Bruque, and M. A. G. Aranda. 2001. “Rietveld quantitative amorphous content analysis.” J. Appl. Crystallogr. 34 (2): 196–202. https://doi.org/10.1107/S0021889801002485.
Diamond, S., and E. B. Kinter. 1965. “Mechanisms of soil-lime stabilization: An interpretive review.” In 92 of Highway Research Record, 83–102. Washington, DC: National Research Council.
Dixon, J. B., and S. B. Weed. 1989. Minerals in soil environments. Madison, WI: Soil Science Society of America.
El-Jazairi, B., and J. M. Illston. 1977. “A simultaneous semi-isothermal method of thermogravimetry and derivative thermogravimetry, and its application to cement pastes.” Cem. Concr. Res. 7 (3): 247–257. https://doi.org/10.1016/0008-8846(77)90086-2.
El-Jazairi, B., and J. M. Illston. 1980. “The hydration of cement paste using the semi-isothermal method of derivative thermogravimetry.” Cem. Concr. Res. 10 (3): 361–366. https://doi.org/10.1016/0008-8846(80)90111-8.
Glenn, G. R. 1967. “X-ray studies of lime-bentonite reaction products.” J. Am. Ceram. Soc. 50 (6): 312–316. https://doi.org/10.1111/j.1151-2916.1967.tb15116.x.
Harris, W., and N. G. White. 2008. X-ray diffraction techniques for soil mineral identification: Methods of soil analysis. Part 5: Mineralogical methods, 81–115. Madison, WI: Soil Science Society of America.
Horpibulsuk, S., R. Rachan, A. Chinkulkijniwat, Y. Raksachon, and A. Suddeepong. 2010. “Analysis of strength development in cement-stabilized silty clay based on microstructural considerations.” Constr. Build. Mater. 24 (10): 2011–2021. https://doi.org/10.1016/j.conbuildmat.2010.03.011.
Ingles, O. G., and J. B. Metcalf. 1972. Soil stabilization: Principles and practice. Sydney, Australia: Butterworths.
Khoury, N., M. Zaman, and J. Laguros. 2006. “Semi-quantification of cementing products using X-ray diffraction technique in stabilized aggregate.” J. X-Ray Sci. Technol. 14 (1): 39–54.
Midgley, H. G. 1979. “The determination of calcium hydroxide in set portland cements.” Cem. Concr. Res. 9 (1): 77–82. https://doi.org/10.1016/0008-8846(79)90097-8.
Mojumdar, S. 2001. “Processing-moisture resistance and thermal analysis of macro-defect-free materials.” J. Therm. Anal. Calorim. 64 (3): 1133–1139. https://doi.org/10.1023/A:1011580626499.
Poppe, L. J., V. F. Paskevich, J. C. Hathaway, and D. S. Blackwood. 2001. A laboratory manual for X-ray powder diffraction., 1–88. Woods Hole, MA: US Geological Survey, Coastal and Marine Geology Program.
Raven, M., and P. Self. 2017. “Outcomes of 12 years of the Reynolds Cup quantitative mineral analysis round robin.” Clays Clay Miner. 65 (2): 122–134. https://doi.org/10.1346/CCMN.2017.064054.
Scrivener, K. L., T. Füllmann, E. Gallucci, G. Walenta, and E. Bermejo. 2004. “Quantitative study of portland cement hydration by X-ray diffraction/Rietveld analysis and independent methods.” Cem. Concr. Res. 34 (9): 1541–1547. https://doi.org/10.1016/j.cemconres.2004.04.014.
Stucki, J. W., and D. L. Bish. 1990. Vol. 3 of Thermal analysis in clay science: CMS workshop lectures. Boulder, CO: Clay Minerals Society.
Tabet, W. A. 2015. “Characterization of cement-stabilized clay using experimental and analytical techniques.” Ph.D. dissertation, Univ. of Oklahoma.
Taylor, H. F. W. 1990. Cement chemistry. New York, NY: Academic.
Wang, L., A. Roy, R. Tittsworth, and R. K. Seals. 2004. “Mineralogy of soil susceptible to sulfate attack after stabilization.” J. Mater. Civ. Eng. 16 (4): 375–382. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:4(375).
Zhou, Q., and F. P. Glasser. 2001. “Thermal stability and decomposition mechanisms of ettringite at .” Cem. Concr. Res. 31 (9): 1333–1339. https://doi.org/10.1016/S0008-8846(01)00558-0.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jun 30, 2017
Accepted: Apr 4, 2018
Published online: Jul 20, 2018
Published in print: Oct 1, 2018
Discussion open until: Dec 20, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.