Strength and Microstructural Study of Recycled Asphalt Pavement: Slag Geopolymer as a Pavement Base Material
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 8
Abstract
The integrated transdisciplinary concepts and technologies for greener and more sustainable innovations for recycling waste materials through geopolymer technique into construction materials were developed in this research. The objective of this research was to study the strength and microstructural development of slag (S)-based geopolymer-stabilized recycled asphalt pavement (RAP) as a pavement base material. An attempt was made to study the influence of a liquid alkaline activator ( ratio) on the strength development of RAP-S geopolymers, which was evaluated by an unconfined compressive strength (UCS) test and examined by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The XRD and SEM analyses results indicated that the main geopolymerization reaction product of RAP-S geopolymers was calcium alumino-silicate hydrate (C-A-S-H). Without (), the S-geopolymer exhibited a slow geopolymerization reaction. The silica presented in was highly soluble; hence, a suitable content of can produce RAP+20%S geopolymers as a base material whose 7-day UCS value met the minimum strength requirements specified by the Department of Highways, Thailand. However, when excess content () was used, the presence of silica retarded the geopolymerization formation rate, leading to UCS reduction. The outcomes of this research were found to be useful for making progress in innovative technologies and applications of geopolymers, which strongly reflected the improvements made in the practical applications of the S-geopolymer as a cleaner production by using the recycled waste material in road work.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was financially supported by the Thailand Research Fund under the TRF Senior Research Scholar program Grant No. RTA5980005, Suranaree University of Technology and Office of the Higher Education Commission under the NRU Project of Thailand.
References
AASHTO. 2012. Standard Specification for materials for aggregate and soil-aggregate subbase, base, and surface courses. AASHTO-M147-65. Washington, DC: AASHTO.
Arulrajah, A., T.-A. Kua, C. Phetchuay, S. Horpibulsuk, F. Mahghoolpilehrood, and M. M. Disfani. 2015. “Spent coffee grounds-fly ash geopolymer used as an embankment structural fill material.” J. Mater. Civ. Eng. 28 (5): 04015197. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001496.
Arulrajah, A., A. Mohammadinia, A. D’Amico, and S. Horpibulsuk. 2017. “Effect of lime kiln dust as an alternative binder in the stabilization of construction and demolition materials.” Constr. Build. Mater. 152: 999–1007. https://doi.org/10.1016/j.conbuildmat.2017.07.070.
Arulrajah, A., A. Mohammadinia, I. Phummiphan, S. Horpibulsuk, and W. Samingthong. 2016. “Stabilization of recycled demolition aggregates by geopolymers comprising calcium carbide residue, fly ash and slag precursors.” Constr. Build. Mater. 114: 864–873. https://doi.org/10.1016/j.conbuildmat.2016.03.150.
Arulrajah, A., J. Piratheepan, T. Aatheesan, and M. Bo. 2011. “Geotechnical properties of recycled crushed brick in pavement applications.” J. Mater. Civ. Eng. 23 (10): 1444–1452. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000319.
Arulrajah, A., J. Piratheepan, M. Disfani, and M. W. Bo. 2012. “Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications.” J. Mater. Civ. Eng. 25 (8): 1077–1088. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000652.
ASTM. 2007. Standard test methods for compressive strength of molded soil-cement cylinders. ASTM-D1633. West Conshohocken, PA: ASTM.
ASTM. 2012. Standard test methods for laboratory compaction characteristics of soil using modified effort [56,000 ft-1bf/ft3 (2,700 kN/m3)]. ASTM-D1557. West Conshocken, PA: ASTM.
ASTM. 2015. Standard specification for materials for soil-aggregate subbase, base, and surface courses. ASTM-D1241. West Conshohocken, PA: ASTM.
Avirneni, D., P. R. T. Peddinti, and S. Saride. 2016. “Durability and long term performance of geopolymer stabilized reclaimed asphalt pavement base courses.” Constr. Build. Mater. 121: 198–209. https://doi.org/10.1016/j.conbuildmat.2016.05.162.
Criado, M., A. Fernández-Jiménez, A. G. De La Torre, M. A. G. Aranda, and A. Palomo. 2007. “An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash.” Cem. Concr. Res. 37 (5): 671–679. https://doi.org/10.1016/j.cemconres.2007.01.013.
Davidovits, J. 1989. “Geopolymers and geopolymeric materials.” J. Therm. Anal. Calorim. 35 (2): 429–441. https://doi.org/10.1007/BF01904446.
DOH (Department of Highways). 2000. Standard of soil cement base. DH-S204/2000. Bangkok, Thailand: DOH.
DRR (Department of Rural Roads). 2013. Standard of soil cement base. DRR244-2013. Bangkok, Thailand: DRR.
Du, Y.-J., N.-J. Jiang, S.-Y. Liu, S. Horpibulsuk, and A. Arulrajah. 2016. “Field evaluation of soft highway subgrade soil stabilized with calcium carbide residue.” Soils Found. 56 (2): 301–314. https://doi.org/10.1016/j.sandf.2016.02.012.
Duxson, P., G. C. Lukey, F. Separovic, and J. S. J. van Deventer. 2005. “Effect of alkali cations on aluminum incorporation in geopolymeric gels.” Ind. Eng. Chem. Res. 44 (4): 832–839. https://doi.org/10.1021/ie0494216.
Edeh, J., O. Onche, and K. Osinubi. 2012. “Rice husk ash stabilization of reclaimed asphalt pavement using cement as additive.” In Proc., GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, 3863–3872. Oakland, California: ASCE.
Fernández Carrasco, L., A. Fernández-Giménez, and A. Palomo. 2007. “Alkali activation of ‘Pozzolan-calcium aluminate cement’ mixtures.” In Paper Presented at the 12th Int. Congress on the Chemistry of Cements. Ottawa, Canada: National Research Council.
Fernández-Jiménez, A., and A. Palomo. 2005. “Composition and microstructure of alkali activated fly ash binder: Effect of the activator.” Cem. Concr. Res. 35 (10): 1984–1992. https://doi.org/10.1016/j.cemconres.2005.03.003.
Fernández-Jiménez, A., F. Puertas, I. Sobrados, and J. Sanz. 2003. “Structure of calcium silicate hydrates formed in alkaline-activated slag: Influence of the type of alkaline activator.” J. Am. Ceram. Soc. 86 (8): 1389–1394.
Gu, K., F. Jin, A. Al-Tabbaa, B. Shi, and J. Liu. 2014. “Mechanical and hydration properties of ground granulated blastfurnace slag pastes activated with MgO–CaO mixtures.” Constr. Build. Mater. 69: 101–108. https://doi.org/10.1016/j.conbuildmat.2014.07.032.
Guo, X., H. Shi, L. Chen, and W. A. Dick. 2010. “Alkali-activated complex binders from class C fly ash and Ca-containing admixtures.” J. Hazard. Mater. 173 (1): 480–486. https://doi.org/10.1016/j.jhazmat.2009.08.110.
Hoy, M., S. Horpibulsuk, and A. Arulrajah. 2016a. “Strength development of recycled asphalt pavement: Fly ash geopolymer as a road construction material.” Constr. Build. Mater. 117: 209–219. https://doi.org/10.1016/j.conbuildmat.2016.04.136.
Hoy, M., S. Horpibulsuk, R. Rachan, A. Chinkulkijniwat, and A. Arulrajah. 2016b. “Recycled asphalt pavement—Fly ash geopolymers as a sustainable pavement base material: Strength and toxic leaching investigations.” Sci. Total Environ. 573: 19–26. https://doi.org/10.1016/j.scitotenv.2016.08.078.
Hoy, M., R. Rachan, S. Horpibulsuk, A. Arulrajah, and M. Mirzababaei. 2017. “Effect of wetting-drying cycles on compressive strength and microstructure of recycled asphalt pavement: Fly ash geopolymer.” Constr. Build. Mater. 144: 624–634. https://doi.org/10.1016/j.conbuildmat.2017.03.243.
IRC (Indian Roads Congress). 2012. Guidelines for design of flexible pavements. IRC: 37. New Delhi: IRC.
Jafari Nadoushan, M., and A. A. Ramezanianpour. 2016. “The effect of type and concentration of activators on flowability and compressive strength of natural pozzolan and slag-based geopolymers.” Constr. Build. Mater. 111: 337–347. https://doi.org/10.1016/j.conbuildmat.2016.02.086.
Jiang, N.-J., Y.-J. Du, S.-Y. Liu, M.-L. Wei, S. Horpibulsuk, and A. Arulrajah. 2015. “Multi-scale laboratory evaluation of the physical, mechanical, and microstructural properties of soft highway subgrade soil stabilized with calcium carbide residue.” Can. Geotech. J. 53 (3): 373–383. https://doi.org/10.1139/cgj-2015-0245.
Jin, F., K. Gu, and A. Al-Tabbaa. 2015. “Strength and hydration properties of reactive MgO-activated ground granulated blastfurnace slag paste.” Cem. Concr. Compos. 57: 8–16. https://doi.org/10.1016/j.cemconcomp.2014.10.007.
Khale, D., and R. Chaudhary. 2007. “Mechanism of geopolymerization and factors influencing its development: A review.” J. Mater. Sci. 42 (3): 729–746. https://doi.org/10.1007/s10853-006-0401-4.
Lecomte, I., C. Henrist, M. Liegeois, F. Maseri, A. Rulmont, and R. Cloots. 2006. “(Micro)-structural comparison between geopolymers, alkali-activated slag cement and portland cement.” J. Eur. Ceram. Soc. 26 (16): 3789–3797. https://doi.org/10.1016/j.jeurceramsoc.2005.12.021.
Mohammadinia, A., A. Arulrajah, H. Haghighi, and S. Horpibulsuk. 2017a. “Effect of lime stabilization on the mechanical and micro-scale properties of recycled demolition materials.” Sustainable Cities Soc. 30: 58–65. https://doi.org/10.1016/j.scs.2017.01.004.
Mohammadinia, A., A. Arulrajah, S. Horpibulsuk, and A. Chinkulkijniwat. 2017b. “Effect of fly ash on properties of crushed brick and reclaimed asphalt in pavement base/subbase applications.” J. Hazard. Mater. 321: 547–556. https://doi.org/10.1016/j.jhazmat.2016.09.039.
Mohammadinia, A., A. Arulrajah, J. Sanjayan, M. M. Disfani, M. Win Bo, and S. Darmawan. 2016. “Stabilization of demolition materials for pavement base/subbase applications using fly ash and slag geopolymers: Laboratory investigation.” J. Mater. Civ. Eng. 28 (7): 04016033. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001526.
Oh, J. E., P. J. M. Monteiro, S. S. Jun, S. Choi, and S. M. Clark. 2010. “The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers.” Cem. Concr. Res. 40 (2): 189–196. https://doi.org/10.1016/j.cemconres.2009.10.010.
Palomo, A., and A. Fernández-Jiménez. 2011. “Alkaline activation, procedure for transforming fly ash into new materials. Part I: Applications.” In Paper Presented at the World of Coal Ash (WOCA) Conf. Denver, CO: World of Coal Ash.
Palomo, A., M. Grutzeck, and M. Blanco. 1999. “Alkali-activated fly ashes: A cement for the future.” Cem. Concr. Res. 29 (8): 1323–1329. https://doi.org/10.1016/S0008-8846(98)00243-9.
Pangdaeng, S., T. Phoo-ngernkham, V. Sata, and P. Chindaprasirt. 2014. “Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive.” Mater. Des. 53: 269–274. https://doi.org/10.1016/j.matdes.2013.07.018.
Phetchuay, C., S. Horpibulsuk, C. Suksiripattanapong, A. Chinkulkijniwat, A. Arulrajah, and M. M. Disfani. 2014. “Calcium carbide residue: Alkaline activator for clay-fly ash geopolymer.” Constr. Build. Mater. 69: 285–294. https://doi.org/10.1016/j.conbuildmat.2014.07.018.
Phummiphan, I., S. Horpibulsuk, T. Phoo-ngernkham, A. Arulrajah, and S.-L. Shen. 2017. “Marginal lateritic soil stabilized with calcium carbide residue and fly ash geopolymers as a sustainable pavement base material.” J. Mater. Civ. Eng. 29 (2): 04016195. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001708.
Phummiphan, I., S. Horpibulsuk, R. Rachan, A. Arulrajah, S.-L. Shen, and P. Chindaprasirt. 2018. “High calcium fly ash geopolymer stabilized lateritic soil and granulated blast furnace slag blends as a pavement base material.” J. Hazard. Mater. 341: 257–267. https://doi.org/10.1016/j.jhazmat.2017.07.067.
Phummiphan, I., S. Horpibulsuk, P. Sukmak, A. Chinkulkijniwat, A. Arulrajah, and S.-L. Shen. 2016. “Stabilisation of marginal lateritic soil using high calcium fly ash-based geopolymer.” Road Mater. Pavement Des. 17 (4): 877–891. https://doi.org/10.1080/14680629.2015.1132632.
Provis, J. L., P. Duxson, G. C. Lukey, and J. S. J. van Deventer. 2005. “Statistical thermodynamic model for Si/Al ordering in amorphous aluminosilicates.” Chem. Mater. 17 (11): 2976–2986. https://doi.org/10.1021/cm050219i.
Puertas, F., S. Martínez-Ramírez, S. Alonso, and T. Vazquez. 2000. “Alkali-activated fly ash/slag cements: strength behaviour and hydration products.” Cem. Concr. Res. 30 (10): 1625–1632. https://doi.org/10.1016/S0008-8846(00)00298-2.
Richardson, I., A. Brough, G. Groves, and C. Dobson. 1994. “The characterization of hardened alkali-activated blast-furnace slag pastes and the nature of the calcium silicate hydrate (CSH) phase.” Cem. Concr. Res. 24 (5): 813–829. https://doi.org/10.1016/0008-8846(94)90002-7.
Saride, S., D. Avirneni, and S. Challapalli. 2016. “Micro-mechanical interaction of activated fly ash mortar and reclaimed asphalt pavement materials.” Constr. Build. Mater. 123: 424–435. https://doi.org/10.1016/j.conbuildmat.2016.07.016.
Saride, S., D. Avirneni, and S. C. P. Javvadi. 2015a. “Utilization of reclaimed asphalt pavements in Indian low-volume roads.” J. Mater. Civ. Eng. 28 (2): 04015107. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001374.
Saride, S., D. Avirneni, S. C. P. Javvadi, A. J. Puppala, and L. R. Hoyos. 2015b. “Evaluation of fly ash treated reclaimed asphalt pavement for base/subbase applications.” Indian Geotech. J. 45 (4): 401–411. https://doi.org/10.1007/s40098-014-0137-z.
Schilling, P. J., A. Roy, H. Eaton, P. G. Malone, and N. W. Brabston. 1994. “Microstructure, strength, and reaction products of ground granulated blast-furnace slag activated by highly concentrated NaOH solution.” J. Mater. Res. 9 (1): 188–197. https://doi.org/10.1557/JMR.1994.0188.
Schneider, J., M. Cincotto, and H. Panepucci. 2001. “29 Si and 27 Al high-resolution NMR characterization of calcium silicate hydrate phases in activated blast-furnace slag pastes.” Cem. Concr. Res. 31 (7): 993–1001. https://doi.org/10.1016/S0008-8846(01)00530-0.
Sherwood, P. 2001. Alternative materials in road construction: A guide to the use of recycled and secondary aggregates. 2nd Ed. London: Thomas Telford.
Shi, C., A. F. Jiménez, and A. Palomo. 2011. “New cements for the 21st century: The pursuit of an alternative to portland cement.” Cem. Concr. Res. 41 (7): 750–763. https://doi.org/10.1016/j.cemconres.2011.03.016.
Sukmak, P., S. Horpibulsuk, and S.-L. Shen. 2013a. “Strength development in clay-fly ash geopolymer.” Constr. Build. Mater. 40: 566–574. https://doi.org/10.1016/j.conbuildmat.2012.11.015.
Sukmak, P., S. Horpibulsuk, S.-L. Shen, P. Chindaprasirt, and C. Suksiripattanapong. 2013b. “Factors influencing strength development in clay-fly ash geopolymer.” Constr. Build. Mater. 47: 1125–1136. https://doi.org/10.1016/j.conbuildmat.2013.05.104.
Thokchom, S., K. K. Mandal, and S. Ghosh. 2012. “Effect of Si/Al ratio on performance of fly ash geopolymers at elevated temperature.” Arabian J. Sci. Eng. 37 (4): 977–989. https://doi.org/10.1007/s13369-012-0230-5.
Yang, N., and R. Wang. 2015. “Sustainable technologies for the reclamation of greenhouse gas CO2.” J. Cleaner Prod. 103: 784–792. https://doi.org/10.1016/j.jclepro.2014.10.025.
Yang, Y.-L., K. R. Reddy, and Y.-J. Du. 2016. “A soil-bentonite slurry wall for the containment of CCR-impacted groundwater.” In Geo-Chicago 2016, 578–589. Chicago, IL: ASCE.
Yarbaşı, N., E. Kalkan, and S. Akbulut. 2007. “Modification of the geotechnical properties, as influenced by freeze-thaw, of granular soils with waste additives.” Cold Reg. Sci. Technol. 48 (1): 44–54. https://doi.org/10.1016/j.coldregions.2006.09.009.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 30 • Issue 8 • August 2018
Copyright
©2018 American Society of Civil Engineers.
History
Received: Sep 10, 2017
Accepted: Feb 21, 2018
Published online: May 30, 2018
Published in print: Aug 1, 2018
Discussion open until: Oct 30, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.