Sustainable Usage of Calcium Carbide Residue for Stabilization of Clays
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 6
Abstract
Chemical stabilization is commonly used to improve engineering properties of problematic soils. This study investigates the possibility of using calcium carbide residue (CCR), a by-product of the acetylene production process, to improve engineering properties of clays. For this purpose, an array of unconfined compressive strength (UCS) and consolidation tests is performed on green bentonite (with predominantly montmorillonite mineralogy) and white kaolin (with predominantly kaolinite mineralogy) to assess strength and compressibility of the stabilized clays with different CCR dosages and at various curing times. Furthermore, a suite of microlevel tests characterizes the microstructural properties of the stabilized clay matrices to provide further insight into the mechanism of strength development. Microlevel assessments are performed using field emission scanning electron microscopy (FESEM), X-ray fluorescence (XRF), particle size analysis (PSA), and nitrogen-based Brunauer-Emmett-Teller (-BET) surface-area analysis tests. The experimental results suggest that CCR can significantly improve the strength and compressibility characteristics of the tested clays. The highest strength improvements are attained with 9 and 12% of CCR for the tested bentonite and kaolin, respectively. Furthermore, the UCS values from the current study are compared with those reported in the literature for the same clays stabilized with several traditional and nontraditional additives. Microlevel observations delineate the formation of new cementing materials that result from chemical reactions between CCR and clay minerals. Less-porous and denser soil fabrics are seen on the surface of clay particles. Findings of this study confirm the potential of CCR as a sustainable alternative to traditional stabilizers for soil improvement purposes in civil engineering applications.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The fourth author acknowledges the financial support provided by the Ministry of Education Malaysia under Fundamental Research Grant R.J130000.7922.4S124, and the financial support provided by the Universiti Teknologi Malaysia (UTM).
References
Arulrajah, A., T. A. Kua, S. Horpibulsuk, M. Mirzababaei, and A. Chinkulkijniwat. 2017a. “Recycled glass as a supplementary filler material in spent coffee grounds geopolymers.” Constr. Build. Mater. 151: 18–27.
Arulrajah, A., T. A. Kua, C. Suksiripattanapong, S. Horpibulsuk, and J. S. Shen. 2017b. “Compressive strength and microstructural properties of spent coffee grounds-bagasse ash based geopolymers with slag supplements.” J. Cleaner Prod. 162 (Sep): 1491–1501.
Arulrajah, A., A. Mohammadinia, I. Phummiphan, S. Horpibulsuk, and W. Samingthong. 2016. “Stabilization of recycled demolition aggregates by geopolymers comprising calcium carbide residue, fly ash and slag precursors.” Constr. Build. Mater. 114: 864–873.
ASTM. 2011. Standard test methods for one-dimensional consolidation properties of soils using incremental loading. ASTM D2435. West Conshohocken, PA: ASTM.
ASTM. 2012. Standard test methods for laboratory compaction characteristics of soil using standard effort (12 400 ft-lbf/ft3 (600 kN-m/m3)). ASTM D698. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test method for unconfined compressive strength of cohesive soil. ASTM D2166. West Conshohocken, PA: ASTM.
Bazne, M. O. A., I. L. Howard, and F. Vahedifard. 2017. “Stabilized very high moisture dredged soil: Relative behavior of Portland-limestone cement and ordinary portland cement.” J. Mater. Civ. Eng. 29 (9): 04017110.
Bobet, A., J. Hwang, C. T. Johnston, and M. Santagata. 2011. “One-dimensional consolidation behavior of cement-treated organic soil.” Can. Geotech. J. 48 (7): 1100–1115.
Cecchin, I., K. R. Reddy, A. Thomé, E. F. Tessaro, and F. Schnaid. 2017. “Nanobioremediation: Integration of nanoparticles and bioremediation for sustainable remediation of chlorinated organic contaminants in soils.” Int. Biodeterior. Biodegrad. 119: 419–428.
Chang, I., J. Im, A. K. Prasidhi, and G. C. Cho. 2015. “Effects of xanthan gum biopolymer on soil strengthening.” Constr. Build. Mater. 74: 65–72.
Chen, J., C. H. Benson, W. J. Likos, and T. B. Edil. 2017. “Interface shear strength of a bentonite-polymer geosynthetic clay liner and a textured geomembrane.” In Geotechnical Frontiers, 219–226. Orlando, FL: ASCE.
Choi, S. G., S. S. Park, S. Wu, and J. Chu. 2017. “Methods for calcium carbonate content measurement of biocemented soils.” J. Mater. Civ. Eng. 29 (11): 06017015.
Disfani, M. M., H. H. Tsang, A. Arulrajah, and E. Yaghoubi. 2017. “Shear and compression characteristics of recycled glass-tire mixtures.” J. Mater. Civ. Eng. 29 (6): 06017003.
Du, Y. J., N. J. Jiang, S. Y. Liu, S. Horpibulsuk, and A. Arulrajah. 2016. “Field evaluation of soft highway subgrade soil stabilized with calcium carbide residue.” Soils Found. 56 (2): 301–314.
Du, Y. J., N. J. Jiang, S. Y. Liu, F. Jin, D. N. Singh, and A. J. Puppala. 2013. “Engineering properties and microstructural characteristics of cement-stabilized zinc-contaminated kaolin.” Can. Geotech. J. 51 (3): 289–302.
Du, Y. J., N. J. Jiang, L. Wang, and M. L. Wei. 2012. “Strength and microstructure characteristics of cement-based solidified/stabilized zinc-contaminated kaolin.” Chin. J. Geotech. Eng. 34 (11): 2114–2120.
Du, Y. J., M. L. Wei, K. R. Reddy, Z. P. Liu, and F. Jin. 2014. “Effect of acid rain pH on leaching behavior of cement stabilized lead-contaminated soil.” J. Hazard. Mater. 271 (1): 131–140.
Eisazadeh, A., K. A. Kassim, and H. Nur. 2010. “Physicochemical characteristics of phosphoric acid stabilized bentonite.” Electron. J. Geotech. Eng. 15: 327–335.
Eisazadeh, A., K. A. Kassim, and H. Nur. 2012a. “Solid-state NMR and FTIR studies of lime stabilized montmorillonitic and lateritic clays.” Appl. Clay Sci. 67: 5–10.
Eisazadeh, A., K. A. Kassim, and H. Nur. 2012b. “Stabilization of tropical kaolin soil with phosphoric acid and lime.” Nat. Hazard. 61 (3): 931–942.
Fan, R. D., Y. J. Du, S. Y. Liu, K. R. Reddy, and Y. L. Yang. 2017. “Analysis of the workability of soil-bentonite slurry-trench cutoff walls.” In Geotechnical Frontiers, 498–507. Orlando, FL: ASCE.
Hassan, W. H. W., A. S. A. Rashid, N. Latifi, S. Horpibulsuk, and S. Borhamdin. 2017. “Strength and morphological characteristics of organic soil stabilized with magnesium chloride.” Q. J. Eng. Geol. Hydrogeol. 50 (4): 454–459.
Ho, M. H., and C. M. Chan. 2011. “Some mechanical properties of cement treated Malaysian soft clay.” World Acad. Sci. Eng. Technol. 5 (2): 24–31.
Horpibulsuk, S., A. Kampala, C. Phetchuay, A. Udomchai, and A. Arulrajah. 2015a. “Calcium carbide residue—A Cementing agent for sustainable soil stabilization.” Geotech. Eng. J. SEAGS AGSSEA. 46 (1): 22–27.
Horpibulsuk, S., W. Katkan, and A. Naramitkornburee. 2009. “Modified Ohio’s curves: A rapid estimation of compaction curves for coarse- and fine-grained soils.” Geotech. Test. J. 32 (1): 64–75.
Horpibulsuk, S., M. D. Liu, D. S. Liyanapathirana, and J. Suebsuk. 2010. “Behavior of cemented clay simulated via the theoretical framework of the structured Cam clay model.” Comput. Geotech. 37 (1–2): 1–9.
Horpibulsuk, S., N. Miura, and D. T. Bergado. 2004. “Undrained shear behavior of cement admixed clay at high water content.” J. Geotech. Geoenviron. Eng. 130 (10): 1096–1105.
Horpibulsuk, S., N. Miura, and T. S. Nagaraj. 2005. “Clay-water/cement ratio identity of cement admixed soft clay.” J. Geotech. Geoenviron. Eng. 131 (2): 187–192.
Horpibulsuk, S., V. Munsrakest, A. Udomchai, A. Chinkulkijniwat, and A. Arulrajah. 2014. “Strength of sustainable non-bearing masonry units manufactured from calcium carbide residue and fly ash.” Constr. Build. Mater. 71: 210–215.
Horpibulsuk, S., C. Suksiripattanapong, W. Samingthong, R. Rachan, and A. Arulrajah. 2015b. “Durability against wetting–drying cycles of water treatment sludge–fly ash geopolymer and water treatment sludge–cement and silty clay–cement systems.” J. Mater. Civ. Eng. 28 (1): 04015078.
Horpibulsuk, S., N. Yangsukaseam, A. Chinkulkijniwat, and Y. J. Du. 2011. “Compressibility and permeability of Bangkok clay compared with kaolinite and bentonite.” Appl. Clay Sci. 52 (1–2): 150–159.
Jaturapitakkul, C., and B. Roongreung. 2003. “Cementing material from calcium carbide residue-rice husk ash.” J. Mater. Civ. Eng. 15 (5): 470–475.
Jiang, N. J., Y. J. Du, S. Y. Liu, M. L. Wei, S. Horpibulsuk, and A. Arulrajah. 2015. “Multi-scale laboratory evaluation of the physical, mechanical, and microstructural properties of soft highway subgrade soil stabilized with calcium carbide residue.” Can. Geotech. J. 53 (3): 373–383.
Kampala, A., S. Horpibulsuk, N. Prongmanee, and A. Chinkulkijniwat. 2013. “Influence of wet-dry cycles on compressive strength of calcium carbide residue-fly ash stabilized clay.” J. Mater. Civ. Eng. 26 (4): 633–643.
Kaya, A., and S. Durukan. 2004. “Utilization of bentonite-embedded zeolite as clay liner.” Appl. Clay Sci. 25 (1): 83–91.
Latifi, N., A. Eisazadeh, and A. Marto. 2014. “Strength behavior and microstructural characteristics of tropical laterite soil treated with sodium silicate-based liquid stabilizer.” Environ. Earth Sci. 72 (1): 91–98.
Latifi, N., A. Eisazadeh, A. Marto, and C. L. Meehan. 2017. “Tropical residual soil stabilization: A powder form material for increasing soil strength.” Constr. Build. Mater. 147: 827–836.
Latifi, N., S. Horpibulsuk, C. L. Meehan, M. Z. Abd Majid, M. M. Tahir, and E. T. Mohamad. 2016a. “Improvement of problematic soils with biopolymer—An environmentally friendly soil stabilizer.” J. Mater. Civ. Eng. 29 (2): 04016204.
Latifi, N., A. Marto, and A. Eisazadeh. 2016b. “Physicochemical behavior of tropical laterite soil stabilized with non-traditional additive.” Acta Geotech. 11 (2): 433–443.
Latifi, N., and C. L. Meehan. 2017. “Strengthening of montmorillonitic and kaolinitic clays with calcium carbide residue: A sustainable additive for soil stabilization.” In Geotechnical Frontiers, Orlando, FL: ASCE. 154–163.
Latifi, N., C. L. Meehan, M. Z. A. Majid, and S. Horpibulsuk. 2016c. “Strengthening montmorillonitic and kaolinitic clays using a calcium-based non-traditional additive: A micro-level study.” Appl. Clay Sci. 132: 182–193.
Latifi, N., A. S. A. Rashid, S. Siddiqua, and S. Horpibulsuk. 2015. “Micro-structural analysis of strength development in low-and high swelling clays stabilized with magnesium chloride solution—A green soil stabilizer.” Appl. Clay Sci. 118: 195–206.
Liu, Y., S. Lei, M. Lin, Y. Li, Z. Ye, and Y. Fan. 2017. “Assessment of pozzolanic activity of calcined coal-series kaolin.” Appl. Clay Sci. 143: 159–167.
Marto, A., N. Latifi, and A. Eisazadeh. 2014. “Effect of non-traditional additives on engineering and microstructural characteristics of laterite soil.” Arabian J. Sci. Eng. 39 (10): 6949–6958.
Mohajerani, A., M. Ashdown, L. Abdihashi, and M. Nazem. 2017. “Expanded polystyrene geofoam in pavement construction.” Constr. Build. Mater. 157: 438–448.
Mohammadinia, A., A. Arulrajah, J. Sanjayan, M. M. Disfani, M. W. Bo, and S. Darmawan. 2014. “Laboratory evaluation of the use of cement-treated construction and demolition materials in pavement base and subbase applications.” J. Mater. Civ. Eng. 27 (6): 04014186.
Petrov, R. J., and R. K. Rowe. 1997. “Geosynthetic clay liner (GCL)-chemical compatibility by hydraulic conductivity testing and factors impacting its performance.” Can. Geotech. J. 34 (6): 863–885.
Phetchuay, C., S. Horpibulsuk, A. Arulrajah, C. Suksiripattanapong, and A. Udomchai. 2016. “Strength development in soft marine clay stabilized by fly ash and calcium carbide residue based geopolymer.” Appl. Clay Sci. 127 (Jul): 134–142.
Phummiphan, I., S. Horpibulsuk, T. Phoo-ngernkham, A. Arulrajah, and S. L. Shen. 2016. “Marginal lateritic soil stabilized with calcium carbide residue and fly ash geopolymers as a sustainable pavement base material.” J. Mater. Civ. Eng. 29 (2): 04016195.
Phummiphan, I., S. Horpibulsuk, R. Rachan, A. Arulrajah, S. L. Shen, and P. Chindaprasirt. 2018. “High calcium fly ash geopolymer stabilized lateritic soil and granulated blast furnace slag blends as a pavement base material.” J. Hazard. Mater. 341 (Jan): 257–267.
Phummiphan, I., S. Horpibulsuk, P. Sukmak, A. Chinkulkijniwat, A. Arulrajah, and S. L. Shen. 2015. “Stabilisation of marginal lateritic soil using high calcium fly ash based geopolymer.” Road Mater. Pavement Des. 17 (4): 877–891.
Rashid, A. S. A., N. Latifi, C. L. Meehan, and K. N. Manahiloh. 2017. “Sustainable improvement of tropical residual soil using an environmentally friendly additive.” Geotech. Geol. Eng. 35 (6): 2613–2623.
Rosa, M. G., B. Cetin, T. B. Edil, and C. H. Benson. 2017. “Freeze-thaw performance of fly ash-stabilized materials and recycled pavement materials.” J. Mater. Civ. Eng. 29 (6): 04017015.
Shen, S. L., J. Han, and Y. J. Du. 2008. “Deep mixing induced property changes in surrounding sensitive marine clays.” J. Geotech. Geoenviron. Eng. 134 (6): 845–854.
Shen, S. L., Z. F. Wang, W. J. Sun, L. B. Wang, and S. Horpibulsuk. 2013. “A field trial of horizontal jet grouting using the composite-pipe method in soft deposit of Shanghai.” Tunnelling Underground Space Technol. 35: 142–151.
Smith, B. T., I. L. Howard, and F. Vahedifard. 2017. “Lightly cementing dredged sediments for sustainable reuse.” Environ. Geotech., in press.
Sukmak, P., P. D. Silva, S. Horpibulsuk, and P. Chindaprasirt. 2015. “Sulfate resistance of clay Portland cement and clay-high calcium fly ash geopolymer.” J. Mater. Civ. Eng. 27 (5): 1–11.
Suksiripattanapong, C., S. Horpibulsuk, S. Boongrasan, A. Udomchai, A. Chinkulkijniwat, and A. Arulrajah. 2015. “Unit weight, strength and microstructure of a water treatment sludge-fly ash lightweight cellular geopolymer.” Constr. Build. Mater. 94: 807–816.
Suksiripattanapong, C., S. Horpibulsuk, C. Phetchuay, J. Suebsuk, T. Phoo-Ngernkham, and A. Arulrajah. 2017. “Water treatment sludge-calcium carbide residue geopolymers as nonbearing masonry units.” J. Mater. Civ. Eng. 29 (9): 04017095.
Tabarsa, A., N. Latifi, C. L. Meehan, and K. N. Manahiloh. 2018. “Laboratory investigation and field evaluation of loess improvement using nanoclay—A sustainable material for construction.” Constr. Build. Mater. 158: 454–463.
Tingle, J. S., J. K. Newman, S. Larson, C. A. Weiss, and J. F. Rushing. 2007. “Stabilization mechanisms of nontraditional additives.” Transp. Res. Rec. 1989 (1): 59–67.
Tremblay, H., J. Duchesne, J. Locat, and S. Leroueil. 2002. “Influence of the nature of organic compounds on fine soil stabilization with cement.” Can. Geotech. J. 39 (3): 535–546.
Yeo, S. S., C. D. Shackelford, and J. C. Evans. 2005. “Consolidation and hydraulic conductivity of nine model soil-bentonite backfills.” J. Geotech. Geoenviron. Eng. 131 (10): 1189–1198.
Yilmaz, I., and B. Civelekoglu. 2009. “Gypsum: An additive for stabilization of swelling clay soils.” Appl. Clay Sci. 44 (1): 166–172.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 30 • Issue 6 • June 2018
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jul 12, 2017
Accepted: Dec 20, 2017
Published online: Mar 30, 2018
Published in print: Jun 1, 2018
Discussion open until: Aug 30, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.