Evaluating the Effect of Mix Design and Thermodynamic Parameters on Moisture Sensitivity of Hot Mix Asphalt
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 2
Abstract
This study is an attempt to identify the effective mix design and thermodynamic parameters for the moisture damage of hot mix asphalt. In the present study, 24 different combinations of asphalt mixtures were made and evaluated using three types of aggregates with different mineralogical composition, two types of asphalt binders, and three types of additives. The components of surface-free energy of asphalt binders and aggregates are measured to provide thermodynamic parameters using the Wilhelmy Plate and Universal Sorption Device, respectively. To determine the performance of moisture sensitivity, environmental conditions simulation according to the modified Lottman test was used, and an indirect tensile strength test has been conducted on asphalt mixtures. The results of statistical analysis presented show that the free energy of cohesion, free energy of asphalt binder-aggregate adhesion, specific surface area of aggregates, and asphalt binder film thickness on the aggregate surface have a direct impact, and the debonding energy of the system and permeability of the asphalt mixture have a reverse impact on asphalt mixture strength against the moisture damage.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aksoy, A., Şamlioglu, K., Tayfur, S., and Özen, H. (2005). “Effects of various additives on the moisture damage sensitivity of asphalt mixtures.” Constr. Build. Mater., 19(1), 11–18.
Arabani, M., and Hamedi, G. H. (2010). “Using the surface free energy method to evaluate the effects of polymeric aggregate treatment on moisture damage in hot-mix asphalt.” J. Mater. Civ. Eng., 802–811.
Arabani, M., and Hamedi, G. H. (2014). “Using the surface free energy method to evaluate the effects of liquid antistrip additives on moisture sensitivity in hot mix asphalt.” Int. J. Pavement Eng., 15(1), 66–78.
Arabani, M., Roshani, H., and Hamedi, G. H. (2011). “Estimating moisture sensitivity of warm mix asphalt modified with zycosoil as an antistrip agent using surface free energy method.” J. Mater. Civ. Eng., 889–897.
ASTM. (1998). “Test method for resistance of plastic flow of bituminous mixtures using marshall apparatus.” ASTM D1559, West Conshohocken, PA.
ASTM. (2003). “Gradation specification for dense asphalt mixtures.” ASTM D3513, West Conshohocken, PA.
Bhasin, A. (2006). “Development of methods to quantify bitumen-aggregate adhesion and loss of adhesion due to water.” Texas A&M Univ., College Station, TX.
Bhasin, A., Little, D. N., Bommavaram, R., and Vasconcelos, K. (2008). “A framework to quantify the effect of healing in bituminous materials using material properties.” Road Mater. Pavement Des., 9(Suppl. 1), 219–242.
Bose, A. (2002). “Measurement of work of adhesion between asphalt and rock.” Univ. of Rhode Island, Kingston, RI.
Cheng, D. (2002). “Surface free energy of asphalt-aggregate system and performance analysis of asphalt concrete.” Ph.D. thesis, Texas A&M Univ., College Station, TX.
Christensen, D. W., and Bonaquist, R. F. (2006). “Volumetric requirements for Superpave mix design.” Transportation Research Board, Washington, DC.
Fowkes, F. M. (1962). “Determination of interfacial tensions, contact angles, and dispersion forces in surfaces by assuming additivity of intermolecular interactions in surfaces.” J. Phys. Chem., 66(2), 382.
Good, R. J., and van Oss, C. J. (1992). “The modern theory of contact angles and the hydrogen bond components of surface energies.” Modern approaches to wettability, Springer, New York, 1–27.
Hamedi, G. H., and Moghadas Nejad, F. (2014). “Using energy parameters based on the surface free energy concept to evaluate the moisture susceptibility of hot mix asphalt.” Road Mater. Pavement Des., 16(2), 239–255.
Hamedi, G. H., and Moghadas Nejad, F. (2015). “Use of aggregate nanocoating to decrease moisture damage of hot mix asphalt.” Road Mater. Pavement Des., 17(1), 32–51.
Hamedi, G. H., Moghadas Nejad, F., and Oveisi, K. (2015). “Investigating the effects of using nanomaterials on moisture damage of HMA.” Road Mater. Pavement Des., 16(3), 536–552.
Hefer, A. W. (2004). “Adhesion in bitumen-aggregate systems and quantification of the effects of water on the adhesive bond.” Texas A&M Univ., College Station, TX.
Hefer, A. W., Bhasin, A., and Little, D. N. (2006). “Bitumen surface energy characterization using a contact angle approach.” J. Mater. Civ. Eng., 759–767.
Henan Kingway Chemicals. (2014). “Nano calcium carbonate (NM-1060).” 〈http://1001836.en.makepolo.com/products/Nano-Calcium-Carbonate%28NM-1060%29-p19754185.html〉.
Hernández Battez, A., et al. (2008). “CuO, and ZnO nanoparticles as antiwear additive in oil lubricants.” Wear, 265(3), 422–428.
Khodaii, A., Khailfeh, V., Dehand, M., and Hamedi, G. H. (2013). “Evaluating the effect of zycosoil on moisture damage of hot mix asphalt using the surface energy method.” J. Mater. Civ. Eng., 259–266.
Little, D. N., and Jones, D. (2003). “Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements.” Transportation Research Board National Seminar, Transportation Research Board, Washington, DC.
Lytton, R. L. (2004). Adhesive fracture in asphalt concrete mixtures, J. Youtcheff, ed.
Martin, J., Cooley, L. A., Jr., and Hainin, H. R. (2003). “Production and construction issues for moisture sensitivity of hot-mix asphalt pavements.” Transportation Research Board National Seminar, Transportation Research Board, Washington, DC.
Moghadas Nejad, F., Arabani, M., Hamedi, G. H., and Azarhoosh, A. (2013). “Influence of using polymeric aggregate treatment on moisture damage in hot mix asphalt.” Constr. Build. Mater., 47(10), 1523–1527.
Moghadas Nejad, F., Azarhoosh, A., Hamedi, G. H., and Azarhoosh, M. (2012a). “Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt.” Constr. Build. Mater., 31(6), 384–388.
Moghadas Nejad, F., Hamedi, G. H., and Azarhoosh, A. (2012b). “Use of surface free energy method to evaluate effect of hydrate lime on moisture damage in hot-mix asphalt.” J. Mater. Civ. Eng., 1119–1126.
Naidoo, P., Logaraj, S., and James, A. D. (2013). “Adhesion and cohesion modifiers for asphalt.” Google Patents.
Shah, B. D. (2003). “Evaluation of moisture damage within asphalt concrete mixes.” Texas A&M Univ., College Station, TX.
Solaimanian, M., Bonaquist, R. F., and Tandon, V. (2007). “Improved conditioning and testing procedures for HMA moisture susceptibility.” Transportation Research Board, Washington, DC.
Solaimanian, M., Harvey, J., Tahmoressi, M., and Tandon, V. (2003). “Test methods to predict moisture sensitivity of hot-mix asphalt pavements.” Transportation Research Board National Seminar, Transportation Research Board, Washington, DC.
Van Oss, C. J., Chaudhury, M. K., and Good, R. J. (1988). “Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems.” Chem. Rev., 88(6), 927–941.
Zollinger, C. J. (2005). “Application of surface energy measurements to evaluate moisture susceptibility of asphalt and aggregates.” Texas A&M Univ., College Station, TX.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Oct 20, 2015
Accepted: Jun 27, 2016
Published online: Aug 31, 2016
Discussion open until: Jan 31, 2017
Published in print: Feb 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.