Surface Treatment on Recycled Coarse Aggregates with Nanomaterials
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 2
Abstract
Surface treatment, using two slurries containing nanomaterials, was applied to recycled aggregate (RA). Experimental studies were conducted (1) to compare properties of RA before and after the surface treatment; and (2) to examine the modification effects of the surface treatment with nanomaterials on the microstructure and macroproperties of recycled aggregate concrete (RAC). The nanoindentation technique was used to achieve elastic modulus of different interface transition zones (ITZs) and old and new mortars in RAC. Test results show that both nanoslurries enhanced new ITZs between the old and new cement mortars. Although they did not work on old ITZs between the virgin aggregate and the old cement mortar, old mortars were surface strengthened. It is also proved that properties of both RA and RAC on the macroscale were improved by the surface treatment using nanomaterials.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support from the National Specialized Research Fund for Doctoral Program (20120101110025) and the New Century Excellent Talents in University (NCET-12-0493) are gratefully acknowledged. The authors also want to express thanks to Dr. Gajendra Shekhawat, at Northwestern University, for his support. Nanoindentation tests in this work used the NIFTI facility (NUANCE Center-Northwestern University).
References
Bentz, D. P. (2006). “Modeling the influence of limestone filler on cement hydration using CEMHYD3D.” Cem. Concr. Compos., 28(2), 124–129.
Bentz, D. P., Sato, T., De la Varga, I., and Weiss, W. J. (2012). “Fine limestone additions to regulate setting in high volume fly ash mixtures.” Cem. Concr. Compos., 34(1), 11–17.
Björnström, J., Martinelli, A., Matic, A., Börjesson, L., and Panas, I. (2004). “Accelerating effects of colloidal nano-silica for beneficial calcium-silicate–hydrate formation in cement.” Chem. Phys. Lett., 392(1), 242–248.
Bonavetti, V. L., Rahhal, V. F., and Irassar, E. F. (2001). “Studies on the carboaluminate formation in limestone filler-blended cements.” Cem. Concr. Compos., 31(6), 853–859.
Buyle-Bodin, F., and Hadjieva-Zaharieva, R. (2002). “Influence of industrially produced recycled aggregates on flow properties of concrete.” Mater. Struct., 35(8), 504–509.
China Architecture & Building Press. (2002a). “Standard for test method of mechanical properties on ordinary concrete.” GB/T 50081-2002, Beijing, 9–18 (in Chinese).
China Architecture & Building Press. (2002b). “Standard for test method of performance on ordinary fresh concrete.” GB/T 50080-2002, Beijing, 8–10 (in Chinese).
China Architecture & Building Press. (2009). “Standard for test method of long-term performance and durability of ordinary concrete.” GB/T 50082-2009, Beijing, 32–39 (in Chinese).
Corinaldesi, V. (2010). “Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates.” Constr. Build. Mater., 24(9), 1616–1620.
Etxeberria, M., Vázquez, E., and Mari, A. (2006). “Microstructure analysis of hardened recycled aggregate concrete.” Mag. Concr. Res., 58(10), 683–690.
Gómez-Soberón, J. (2002). “Porosity of recycled concrete with substitution of recycled concrete aggregate: An experimental study.” Cem. Concr. Res., 32(8), 1301–1311.
Günçan, N. F. (1995). “Using waste concrete as aggregate.” Cem. Concr. Res., 25(7), 1385–1390.
Henry, M., Pardo, G., Nishimura, T., and Kato, Y. (2011). “Balancing durability and environmental impact in concrete combining low-grade recycled aggregates and mineral admixtures.” Resour. Conserv. Recycl., 55(11), 1060–1069.
Ji, T. (2005). “Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO2.” Cem. Concr. Res., 35(10), 1943–1947.
Li, W., Xiao, J., Sun, Z., Kawashima, S., and Shah, S. P. (2012). “Interfacial transition zones in recycled aggregate concrete with different mixing approaches.” Constr. Build. Mater., 35(10), 1045–1055.
Li, W. G. (2013). “Multi-scale mechanical properties of modeled recycled aggregate concrete.” Ph.D. thesis, Tongji Univ., Shanghai, China (in Chinese).
Li, X. (2008). “Recycling and reuse of waste concrete in China: Part I. Material behaviour of recycled aggregate concrete.” Resour. Conserv. Recycl., 53(1), 36–44.
Lin, K. L., Chang, W. C., Lin, D. F., Luo, H. L., and Tsai, M. C. (2008). “Effects of nano-SiO2 and different ash particle sizes on sludge ash-cement mortar.” J. Environ. Manage., 88(4), 708–714.
Miller, M., Bobko, C., Vandamme, M., and Ulm, F. J. (2008). “Surface roughness criteria for cement paste nanoindentation.” Cem. Concr. Res., 38(4), 467–476.
Ollivier, J. P., Maso, J. C., and Bourdette, B. (1995). “Interfacial transition zone in concrete.” Adv. Cem. Based Mater., 2(1), 30–38.
Olorunsogo, F. T., and Padayachee, N. (2002). “Performance of recycled aggregate concrete monitored by durability indexes.” Cem. Concr. Res., 32(2), 179–185.
OriginPro 9.0 [Computer software]. Northampton, MA, OriginLab Corporation.
Paine, K. A., and Dhir, R. K. (2010). “Recycled aggregates in concrete: A performance related approach.” Mag. Concr. Res., 62(7), 519–530.
Poon, C. S., and Chan, D. (2007). “The use of recycled aggregate in concrete in Hong Kong.” Resour. Conserv. Recycl., 50(3), 293–305.
Prokopski, G., and Halbiniak, J. (2000). “Interfacial transition zone in cementitious materials.” Cem. Concr. Res., 30(4), 579–583.
Qing, Y., Zenan, Z., Deyu, K., and Rongshen, C. (2007). “Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume.” Constr. Build. Mater., 21(3), 539–545.
Quan, H. Z. (2009). “Application overview and technical standards of recycled concrete in other countries.” J. Qingdao. Technol. Univ., 30(4), 87–92.
Rahal, K. (2007). “Mechanical properties of concrete with recycled coarse aggregate.” Build. Environ., 42(1), 407–415.
Rao, A., Jha, K. N., and Misra, S. (2007). “Use of aggregates from recycled construction and demolition waste in concrete.” Resour. Conserv. Recycl., 50(1), 71–81.
Sakulich, A. R., and Li, V. C. (2011). “Nanoscale characterization of engineered cementitious composites (ECC).” Cem. Concr. Res., 41(2), 169–175.
Sari, M., Prat, E., and Labastire, J. F. (1999). “High strength self-compacting concrete original solutions associating organic and inorganic admixtures.” Cem. Concr. Res., 29(6), 813–818.
Senff, L., Labrincha, J. A., Ferreira, V. M., Hotza, D., and Repette, W. L. (2009). “Effect of nano-silica on rheology and fresh properties of cement pastes and mortars.” Constr. Build. Mater., 23(7), 2487–2491.
Sobolev, K., and Gutiérrez, M. F. (2005). “How nanotechnology can change the concrete world.” Am. Ceram. Soc. Bull., 84(10), 14.
Standards Press of China. (2011). “Pebble and crushed stone for construction.” GB/T 14685-2011, Beijing (in Chinese).
Topcu, I. B., and Şengel, S. (2004). “Properties of concretes produced with waste concrete aggregate.” Cem. Concr. Res., 34(8), 1307–1312.
Zhu, Y. G., Kou, S. C., Poon, C. S., Dai, J. G., and Li, Q. Y. (2013). “Influence of silane-based water repellent on the durability properties of recycled aggregate concrete.” Cem. Concr. Compos., 35(1), 32–38.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Oct 22, 2014
Accepted: Apr 29, 2015
Published online: Jul 2, 2015
Discussion open until: Dec 2, 2015
Published in print: Feb 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.