Indoor and Outdoor Aging Behaviors of a Heat-Reflective Coating for Pavement in the Chongqing Area
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 1
Abstract
The indoor and outdoor aging behaviors of a heat-reflective coating were studied regarding the problems derived from aging and reduced cooling effects. A one-year natural exposure test of the coating on a roof and on concrete samples was conducted, and a 28-day xenon lamp aging test on concrete and cylindrical samples was carried out. Surface appearance, infrared spectrum, cooling value, and reflectivity changes in different aging periods were analyzed. The results show that the amount of solar radiation is a key factor in aging. Aging can cause a gradual increase in carbonyl content and thus lead to a decrease in resin light transmittance, given that the carbonyl group absorbs visible light and infrared rays easily. This results in a reduction in reflectivity and cooling value. Reflectivity and cooling value show a linear relationship in the indoor and outdoor aging process. With respect to reflectivity and cooling value, solar radiation has a downward quadratic parabolic tendency whereas xenon lamp radiation maintains a linear relationship. By comparing the results of the indoor and outdoor aging tests, it can be concluded that aging for 32.0 days under accelerated conditions is equivalent to aging for one year under natural exposure conditions in the Chongqing area.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was sponsored by the National Natural Science Foundation of China (Project 51408088)
References
ASTM. (1998). “Standard test method for adhesion of organic coatings by scrape adhesion.” D2197, West Conshohocken, PA.
ASTM. (2005). “Standard test method for film hardness by pencil test.” D3363, New York.
ASTM. (2007). “Standard test methods for solar energy transmittance and reflectance (terrestrial) of sheet materials.” E424, West Conshohocken, PA.
ASTM. (2013a). “Standard practice for operating xenon arc light apparatus for exposure of non-metallic materials.” G155, West Conshohocken, PA.
ASTM. (2013b). “Standard test methods for mandrel bend test of attached organic coatings.” D522, West Conshohocken, PA.
Cao, X., Tang, B., Zhu, H., and Li, W. (2010). “Preparation and performance research of thermosetting thermal-reflective coating for asphalt pavement.” Adv. Mater. Res., 150–151, 44–50.
Cao, X., Tang, B., Zhu, H., Zhang, A., and Chen, S. (2011). “Cooling principle analysis and performance evaluation of heat-reflective coating for asphalt pavement.” J. Mater. Civ. Eng., 1067–1075.
Feng, D., and Zhang, X. (2010). “Development of heat reflection coating and observation of its road performance.” J. Highway Transp. Res. Dev., 27(10), 17–20.
Kawakami, A., and Kubo, K. (2008). “Development of a cool pavement for mitigating the urban heat island effect in Japan.” Proc., Int. ISAP Symp. on Asphalt Pavements and Environment, International Society for Asphalt Pavements, Lino Lakes, MN, 423–434.
Kubo, K., and Kido, H. (2006). “Study on pavement technologies to mitigate the heat island effect and their effectiveness.” Proc., 10th Int. Conf. on Asphalt Pavements, International Society for Asphalt Pavements, Lino Lakes, MN, 1–10.
Li, H., Harvey, J., and Kendall, A. (2013a). “Field measurement of albedo for different land cover materials and effects on thermal performance.” Build. Environ., 59(1), 536–546.
Li, H., Harvey, J., and Kendall, A. (2013b). “Measurement of pavement solar reflectivity and effect on thermal performance.” Proc., Transportation Research Board 92nd Annual Meeting, Transportation Research Board, Washington, DC.
Li, Q., and Meng, H. (2011). “Influence of artificial accelerated aging on the protective performance of polyurea coatings.” J. Univ. Sci. Technol. Beijing, 33(1), 71–74.
Lu, Y. (2012). “Ageing mechanisms and influencing factors for organic coating used in plateau environment.” Paint Coat. Ind., 42(4), 12–25.
Santamouris, M. (2013). “Using cool pavements as a mitigation strategy to fight urban heat island—A review of the actual developments.” Renewable Sustainable Energy Rev., 26(10), 224–240.
Shao, H., Hu, Z., Xue, B., Qin, S., and Yu, J. (2010). “Study on the anti-aging properties of urushiol/fluoro-siloxane resin.” New Chem. Mater., 38(4), 156–159.
Sleiman, M., Kirchstetter, T. W., Berdahl, P., Gilbert, H., Quelen, S., and Marlot, L. (2014). “Soiling of building envelope surfaces and its effect on solar reflectance—Part II: Development of an accelerated aging method for roofing materials.” Solar Energy Mater. Solar Cells, 122(3), 271–281.
Wang, L., Wu, K., and Li, D. (2010). “Factors influencing weather resistant performance of coil coatings.” Paint Coat. Ind., 40(4), 25–28.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Dec 1, 2014
Accepted: Mar 27, 2015
Published online: May 28, 2015
Discussion open until: Oct 28, 2015
Published in print: Jan 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.