Framework for Low-Temperature Cracking Analysis of Asphalt Mixtures Using a Viscoelastic Continuum Damage Model
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 10
Abstract
Thermal cracking performance assessment of flexible pavements is paramount to improve the quality of the roads in cold-climate regions. In this paper, a reduced testing framework for analysis of hot-mix asphalt (HMA) concrete is proposed to replace the indirect tensile (IDT) creep compliance and strength testing by dynamic modulus and fatigue tests performed on an asphalt mixture performance tester (AMPT) device. The theoretical aspects of the methodology are shown as well as its validation with laboratory results. Mixtures containing various percentages of reclaimed material (RAP) were investigated to assess the adequacy of the proposed method to this type of material. Results showed that the proposed framework can be successfully used to predict the low-temperature creep compliance and IDT strength, which are the two key elements in thermal cracking performance analysis of flexible pavements.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1993). “Standard test method for thermal stress restrained specimen tensile strength.” TP10-93, Washington, DC.
AASHTO. (2007). “Standard method of test for determining the creep compliance and strength of hot-mix asphalt (HMA) using the indirect tensile test device.” T322-07, Washington, DC.
AASHTO. (2012). “Standard method of test for determining the dynamic modulus and flow number for hot mix asphalt (HMA) using the asphalt mixture performance tester (AMPT).” TP79-12, Washington, DC.
ABAQUS version 6.11 [Computer software]. RI, Dassault Systems.
Bonaquist, R. F., Christensen, D. W., and Stump, W. (2003). “Simple performance tester for Superpave mix design: First-article development and evaluation.”, Washington, DC.
Chehab, G. R., and Kim, R. Y. (2005). “Viscoelastoplastic continuum damage model application to thermal cracking of asphalt concrete.” J. Mater. Civ. Eng., 384–392.
Christensen, D. W., and Bonaquist, R. F. (2004). “Evaluation of indirect tensile test (IDT) procedures for low-temperature performance of hot mix asphalt.”, National Cooperative Highway Research Program, Washington, DC.
Christensen, R. M. (1982). Theory of viscoelasticity, 2nd Ed., Academic Press, New York.
Cost, T. L., and Becker, E. B. (1970). “A multidata method of approximate Laplace transform inversion.” Int. J. Numer. Method. Eng., 2(2), 207–219.
Daniel, J. S. (2001). “Development of a simplified fatigue test and analysis procedure using a viscoelastic continuum damage model and its application to WesTrack mixtures.” North Carolina State Univ., Raleigh, NC.
Haas, R., Meyer, F., Assaf, G., and Lee, H. (1987). “A comprehensive study of cold climate airport pavement cracking.” J. Assoc. Asphalt Paving Technol., 56, 198–245.
Hiltunen, D. R., and Roque, R. (1994). “A mechanics-based prediction model for thermal cracking of asphaltic concrete pavements.” J. Assoc. Asphalt Paving Technol., 63, 81–108.
Jones, G. M., Darter, M. I., and Littlefield, G. (1968). “Thermal expansion-contraction of asphaltic concrete.” J. Assoc. Asphalt Paving Technol., 37, 56–97.
Kim, H., Wagoner, M. P., and Buttlar, W. G. (2008). “Simulation of fracture behavior in asphalt concrete using a heterogeneous cohesive zone discrete element model.” J. Mater. Civ. Eng., 552–563.
Kim, R. Y., Guddati, M. N., Underwood, S. B., Yun, T. Y., Subramanian, V., and Savadatti, S. (2009). “Development of a multiaxial viscoelastoplastic continuum damage model for asphalt mixtures.”, FHWA, Georgetown Pike, VA.
Kreyszig, E. (2011). Advanced engineering mathematics, 10th Ed., Wiley, New York.
Mun, S. (2006). “Numerical computation of convolution integral for the linear viscoelasticity of asphalt concrete.” KSCE J. Civ. Eng., 10(3), 195–200.
Paris, P. C., Gomez, M. P., and Anderson, W. E. (1961). “A rational analytic theory of fatigue.” Trend Eng., 13, 9–14.
Park, S. W., Kim, R. Y., and Schapery, R. A. (1996). “A viscoelastic continuum damage model and its application to uniaxial behavior of asphalt concrete.” Mech. Mater., 24(4), 241–255.
Park, S. W., and Schapery, R. A. (1997). “A viscoelastic constitutive model for particulate composites with growing damage.” Int. J. Solid. Struct., 34(8), 931–947.
Park, S. W., and Schapery, R. A. (1999). “Methods of interconversion between linear viscoelastic material functions. Part I—A numerical method based on Prony series.” Int. J. Solid. Struct., 36(11), 1653–1675.
Schapery, R. A. (1975). “A theory of crack initiation and growth in viscoelastic media. I. Theoretical development.” Int. J. Fract., 11(1), 141–159.
Taylor, R. L., Pister, K. S., and Goudreau, G. L. (1970). “Thermomechanical analysis of viscoelastic solids.” Int. J. Numer. Method. Eng., 2(1), 45–59.
Underwood, S. B., Hou, E. T., and Kim, R. Y. (2009). “Advanced testing and characterization of bituminous materials.” Chapter 82, Application of simplified VECD modeling to the fatigue life prediction of asphalt concrete mixtures, L. Andreas, M. Partl, T. Scarpas, and I Al-Qadi, eds., CRC Press.
Underwood, S. B., and Kim, R. Y. (2011). “Viscoelastoplastic continuum damage model for asphalt concrete in tension.” J. Eng. Mech., 732–739.
Wagoner, M. P., Buttlar, W. G., and Paulino, G. H. (2005). “Development of a single-edge notched beam test for asphalt concrete mixtures.” J. Test. Eval., 33(6), 452–460.
Zocher, M. A., Groves, S. E., and Allen, D. H. (1997). “A three-dimensional finite element formulation for thermoviscoelastic orthotropic media.” Int. J. Numer. Method. Eng., 40(12), 2267–2288.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 14, 2014
Accepted: Oct 7, 2014
Published online: Dec 16, 2014
Discussion open until: May 16, 2015
Published in print: Oct 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.