Experimental Evaluation of Strength and Elastic Properties of Polymer Concrete with Different Volumes of Volcanic Tuff Acting as Filler
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 6
Abstract
During the past decade, attention has been drawn to a relatively new composite material, polymer concrete (PC). The idea started as a possible replacement of portland cement in concrete by a polymerized monomer, which resulted in polymer modified concrete (PMC). PC is considered to be a relatively new high-performance material. It is essentially a cementless concrete in which ordinary portland cement has been entirely replaced by polymer resins that bind together the aggregates, forming a rocklike solid material. This paper aims at identifying the suitability of using volcanic tuff as filler in polymer concrete. Based on the experimental results, it can be said that the volcanic tuff influences the microstructure of polymer concrete, leading to a more homogeneous and compact structure. This results in improved mechanical and elastic properties, provided a threshold value is not exceeded.
Get full access to this article
View all available purchase options and get full access to this article.
References
Agavriloaie, L., Oprea, S., Barbuta, M., and Luca, F. (2012). “Characterisation of polymer concrete with epoxy polyurethane acryl matrix.” Constr. Build. Mater., 37, 190–196.
Ahmad, S. H., and Shah, S. P. (1985). “Structural properties of high strength concrete and its implications for precast pre-stressed concrete.” PCI J., 30(6), 92–119.
Ariffin, M. A. M., Bhutta, M. A. R., Hussin, M. W., Mohd Tahir, M., and Aziah, N. (2013). “Sulfuric acid resistance of blended ash geopolymer concrete.” Constr. Build. Mater., 43, 80–86.
ASTM. (2010). “Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression.” C469/C469 M, West Conshohocken, PA.
ASTM. (2012). “Standard test method for density, relative density (specific gravity), and absorption of fine aggregate.” C128–12, West Conshohocken, PA.
Bărbuţă, M., Harja, M., and Babor, D. (2010a). “Concrete polymer with fly ash. Morphologic analysis based on scanning electron microscopic observations.” Rev. Rom. Mater., 40(1), 3–14.
Bărbuţă, M., Harja, M., and Baran, I. (2010b). “Comparison of mechanical properties for polymer concrete with different types of filler.” J. Mater. Civ. Eng., 696–701.
Bărbuţă, M., Ţăranu, N., and Harja, M. (2009). “Wastes used in obtaining polymer composite.” Environ. Eng. Manage. J., 8(5), 1145–1150.
Bărbuţă, M., Toma, I. O., Harja, M., Toma, A. M., and Gavriloaia, C. (2013). “Behaviour of short polymer-high strength concrete columns under eccentric compression.” Arch. Civ. Mech. Eng., 13(1), 119–127.
Carrasquillo, R. L., Nilson, A. H., and Slate, F. O. (1981). “Properties of high strength concrete subject to short term loads.” ACI J., 78(3), 171–178.
da Porto, F., Stievanin, E., and Pellegrino, C. (2012). “Efficiency of RC square columns repaired with polymer-modified cementitious mortars.” Cem. Concr. Compos., 34(4), 545–555.
El-Hawary, M. M., and Abdul-Jaleel, A. (2010). “Durability assessment of epoxy modified concrete.” Constr. Build. Mater., 24(8), 1523–1528.
European Committee for Standardization. (2002). “Design of concrete structures—Part 1: General rules and rules for buildings, Ref. No. prEN 1992-1-1.”, Brussels, Belgium.
Garbacz, A., and Sokolowska, J. J. (2013). “Concrete-like polymer composites with fly ashes—Comparative study.” Constr. Build. Mater., 38, 689–699.
Giuşcă, R., and Corobceanu, V. (2010). “New technologies for strengthening damaged reinforced concrete structures.” Curr. Sci. India, 98(6), 829–833.
Golestaneh, M., Amini, G., Najafpour, D., and Beygi, M. A. (2010). “Evaluation of mechanical strength of epoxy polymer concrete with silica powder as filler.” World Appl. Sci. J., 9(2), 216–220.
Gorninski, J. P., Dal Molin, D. C., and Kazmierezak, C. S. (2007a). “Strength degradation of polymer concrete in acidic environments.” Cem. Concr. Compos., 29(8), 637–645.
Gorninski, J. P., Dal Molin, D. C., and Kazmierczak, C. S. (2007b). “Comparative assessment of isophtalic and orthophtalic polyester polymer concrete: Different costs, similar mechanical properties and durability.” Constr. Build. Mater., 21(3), 546–555.
Gualtieri, A. F., Veratti, L., Tucci, A., and Esposito, L. (2012). “Recyclicng of the product of thermal inertization of cement-asbestos in geopolymers.” Constr. Build. Mater., 31, 47–51.
Habert, G., d’Espinose de Lacaillerie, J. B., and Roussel, N. (2011). “An environmental evaluation of geopolymer based concrete production: Reviewing current research trends.” J. Cleaner Prod., 19(11), 1229–1238.
Hall, J. K., Daneke, G. A., and Lenox, M. J. (2010). “Sustainable development and entrepreneurship: Past contributions and future directions.” J. Bus. Venturing, 25(5), 439–448.
Harja, M., Bărbuţă, M., and Rusu, L. (2009). “Obtaining and characterization of the polymer concrete with fly ash.” J. Appl. Sci., 9(1), 88–96.
Kou, S.-C., and Poon, C.-S. (2013). “A novel polymer concrete made with recycled glass aggregates, fly ash and metakaolin.” Constr. Build. Mater., 41, 146–151.
Lee, W. K. W., and van Deventer, J. S. J. (2004). “The interface between natural siliceous aggregates and geopolymers.” Cem. Concr. Res., 34(2), 195–206.
Liebig, E., and Althaus, E. (1998). “Pozzolanic activity of volcanic tuff and suevite: Effects of calcination.” Cem. Concr. Res, 28(4), 567–575.
Măgureanu, C., Sosa, I., Negruţiu, C., and Hegheş, B. (2012). “Mechanical properties and durability of ultra-high-performance concrete.” ACI. Mater. J., 109(2), 177–184.
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., and Corder, G. D. (2011). “Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement.” J. Cleaner Prod., 19(9–10), 1080–1090.
Mendis, P. A. (2001). “Design of high strength concrete members: State-of-the-art.” Progr. Struct. Eng. Mater., 5(1), 1–15.
Meyer, C. (2009). “The greening of the concrete industry.” Cem. Concr. Compos., 31(8), 601–605.
Nemati, K. M., Monteiro, P. J. M., and Scrivener, K. L. (1998). “Analysis of compressive stress-induced cracks in concrete.” ACI Mater. J., 95(5), 617–630.
Pacheco-Torgal, F., and Jalali, S. (2009). “Sulphuric acid resistance of plain, polymer modified, and fly ash cement concretes.” Constr. Build. Mater., 23(12), 3485–3491.
Reis, J. M. L. (2010). “Fracture assessment of polymer concrete in chemical degradation solutions.” Constr. Build. Mater., 24(9), 1708–1712.
Romanian Standard Association. (2002a). “Testing hardened concrete—Part I: Shape, dimensions and other requirements for specimens and moulds.”, Bucharest, Romania (in Romanian).
Romanian Standard Association. (2002b). “Testing hardened concrete—Part III: Compressive strength.” (in Romanian).
Romanian Standard Association. (2002c). “Testing hardened concrete—Part V: Flexural strength of test specimens.” (in Romanian).
Romanian Standard Association. (2002d). “Testing hardened concrete—Part VI: Tensile splitting strength of test specimens.” (in Romanian).
Roşu, L., Ciobanu, C., Roşu, D., and Caşcaval, C. N. (2008). “Preparation and characterization of silver sulfathiazole-epoxy resin networks.” Polimery-W, 53(9), 644–648.
Schrofl, C., Mechtcherine, V., and Gorges, M. (2012). “Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage.” Cem. Concr. Res., 42(6), 865–873.
Shi, X. M., Xie, N., Fortune, K., and Gong, J. (2012). “Durability of steel reinforced concrete in chloride environments: An overview.” Constr. Build. Mater., 30, 125–138.
Skvara, F., et al. (2006). “Concrete based on fly ash geopolymer.” Proc., 10th East Asia-Pacific Conf. on Structural Engineering and Construction—Materials, Experimentation, Maintenance and Rehabilitation, Asian Institute of Technology, Bangkok.
Snellings, R., Mertens, G., Cizer, O., and Elsen, J. (2010). “Early age hydration and pozzolanic reaction in natural zeolite blended cements: Reaction kinetics and products by in situ synchrotron X-ray powder diffraction.” Cem. Concr. Res., 40(12), 1704–1713.
Sofi, M., van Deventer, J. S. J., Mendis, P. A., and Lukey, G. C. (2007). “Engineering properties of inorganic polymer concretes (IPCs).” Cem. Concr. Res., 37(2), 251–257.
Spaargaren, G., and Mol, A. P. J. (2008). “Greening global consumption: Redefining politics and authority.” Global Environ. Change, 18(3), 350–359.
Toma, I. O., Covatariu, D., Toma, A. M., Taranu, G., and Budescu, M. (2013). “Greening of concrete industry by incorporating gypsum-based industrial wastes as supplementary cementitious materials.” Adv. Mater. Res., 649, 246–249.
Turner, L. K., and Collins, F. G. (2013). “Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete.” Constr. Build. Mater., 43, 125–130.
Uzal, B., Turanli, L., Yucel, H., Goncuoglu, M. C., and Culfaz, A. (2010). “Pozzolanic activity of clinoptilolite: A comparative study with silica fume, fly ash and a non-zeolitic natural pozzolan.” Cem. Concr. Res., 40(3), 398–404.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Oct 28, 2013
Accepted: Apr 14, 2014
Published online: Aug 18, 2014
Discussion open until: Jan 18, 2015
Published in print: Jun 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.