Utilization of Silica Fume to Stabilize the Dispersion of Carbon Nanofilaments in Cement Paste
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 7
Abstract
The incorporation of carbon nanofilaments in cementitious materials has been researched extensively in the past decade. However, the poor dispersibility of these filaments remains a hurdle to harnessing their exceptional properties. This work presents a method for enhancing the dispersion of carbon nanofibers (CNFs) in cementitious matrices. The method incorporates silica fume to stabilize the distribution of CNFs in fresh cement paste. The investigations show that this method is significantly more effective than similar approaches. To examine the effectiveness of the method, specimens of CNF incorporated cement paste with different concentrations of silica fume were produced and imaged by optical microscopy. Using a novel dispersion quantification method, the dispersion values of CNFs in the specimens were measured and compared. The results show that silica fume, if used in sufficient proportions, can largely prevent the reagglomeration of CNFs in fresh cement paste, and thereby stabilize their dispersion.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was sponsored in part by the Federal Highway Administration through the cooperative agreement DTFH61-08-H-00004.
References
Chen, P.-W., and Chung, D. (1995). “Improving the electrical conductivity of composites comprised of short conducting fibers in a nonconducting matrix: The addition of a nonconducting particulate filler.” J. Electron. Mater., 24(1), 47–51.
Chen, P.-W., and Chung, D. D. L. (1993). “Concrete reinforced with up to 0.2 vol% of short carbon fibres.” Composites, 24(1), 33–52.
Chen, P.-W., Fu, X., and Chung, D. D. L. (1997). “Microstructural and mechanical effects of latex, methylcellulose, and silica fume on carbon fiber reinforced cement.” ACI Mater. J., 94(2), 147–155.
Feller, J. F., Bruzaud, S., and Grohens, Y. (2004). “Influence of clay nanofiller on electrical and rheological properties of conductive polymer composite.” Mater. Lett., 58(5), 739–745.
Fidjestol, P. (2006). “Guide for the use of silica fume in concrete.”, American Concrete Institute, Detroit, 1–51.
Fu, X., and Chung, D. D. L. (1996). “Submicron carbon filament cement-matrix composites for electromagnetic interference shielding.” Cem. Concr. Res., 26(10), 1467–1472.
Fu, X., and Chung, D. D. L. (1998). “Submicron-diameter-carbon-filament cement-matrix composites.” Carbon, 36(4), 459–462.
Grasley, Z., and Yazdanbakhsh, A. (2011). “Quantifying the dispersion of discrete inclusions using continuum theory.” Compos. Part A: Appl. Sci. Manuf., 42(12), 2043–2050.
Kotaki, M., Wang, K., Toh, M. L., Chen, L., Wong, S. Y., and He, C. (2006). “Electrically conductive epoxy/clay/vapor grown carbon fiber hybrids.” Macromolecules, 39(3), 908–911.
Liu, L., and Grunlan, J. C. (2007). “Clay assisted dispersion of carbon nanotubes in conductive epoxy nanocomposites.” Adv. Funct. Mater., 17(14), 2343–2348.
Luo, S., Liu, T., and Wang, B. (2010). “Comparison of ultrasonication and microfluidization for high throughput and large-scale processing of SWCNT dispersions.” Carbon, 48(10), 2992–2994.
Ma, P.-C., Mo, S.-Y., Tang, B.-Z., and Kim, J.-K. (2010). “Dispersion, interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites.” Carbon, 48(6), 1824–1834.
Ormsby, R., et al. (2011). “Effect of MWCNT addition on the thermal and rheological properties of polymethyl methacrylate bone cement.” Carbon, 49(9), 2893–2904.
Sanchez, F., and Ince, C. (2009). “Microstructure and macroscopic properties of hybrid carbon nanofiber/silica fume cement composites.” Compos. Sci. Technol., 69(7–8), 1310–1318.
Suresh, G. A. (2007). Processing and properties of nanocomposites, World Scientific Publishing, Singapore.
Tyson, B., Al-Rub, R. A., Yazdanbakhsh, A., and Grasley, Z. (2011). “Carbon nanotubes and carbon nanofibers for enhancing the mechanical properties of nanocomposite cementitious materials.” J. Mater. Civ. Eng., 1028–1035.
Welch, C. R., Marcuson, W. F., and Adiguzel, I. (2009). “Will supermolecules and supercomputures lead to super construction materials?” Civ. Eng. Mag., 78(11), 42–53.
Wong, E. W., Sheehan, P. E., and Lieber, C. M. (1997). “Nanobeam mechanics: Elasticity, strength, and toughness of nanorods and nanotubes.” Science, 277(5334), 1971–1975.
Yakobson, B., and Avouris, P. (2001). “Mechanical properties of carbon nanotubes.” Carbon Nanotubes, 80, 287–327.
Yazdanbakhsh, A., Grasley, Z., Tyson, B., and Abu Al-Rub, R. (2009). “Carbon nanofibers and nanotubes in cementitious materials: Some issues on dispersion and interfacial bond.” ACI Spec. Publ., 267(3), 21–34.
Yazdanbakhsh, A., Grasley, Z., Tyson, B., and Abu Al-Rub, R. (2010). “Distribution of carbon nanofibers and nanotubes in cementitious composites.” Transportation Research Record 2142, Transportation Research Board, Washington, DC, 89–95.
Yazdanbakhsh, A., Grasley, Z., Tyson, B., and Abu Al-Rub, R. (2011). “Dispersion quantification of inclusions in composites.” Compos. Part A: Appl. Sci. Manuf., 42(1), 75–83.
Yazdanbakhsh, A., Grasley, Z., Tyson, B., and Abu Al-Rub, R. (2012). “Challenges and benefits of utilizing carbon nanofilaments in cementitious materials.” J. Nanomater., 2012, 8.
Yu, M.-F., Lourie, O., Dyer, M. J., Moloni, K., Kelly, T. F., and Ruoff, R. S. (2000). “Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load.” Science, 287(5453), 637–640.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 26 • Issue 7 • July 2014
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 4, 2013
Accepted: Dec 30, 2013
Published online: Jan 2, 2014
Published in print: Jul 1, 2014
Discussion open until: Sep 2, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.