Reuse of Fine Quarry Wastes in Pavement: Case Study in Brazil
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 8
Abstract
The lateritic gravel routinely used in the midwest region of Brazil for pavement construction is no longer found near the urban centers. Thus, there is an increasing need for studies of alternative materials to replace it. This study presents an evaluation of the use of fine quarry wastes. An experimental test asphalt pavement was built with conventional materials and a soil–fine quarry waste mixture. Field tests were conducted to assess the behavior of these materials. It was verified that this waste is able to provide the same performance levels for low-volume roads while offering environmental and economic advantages.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) and Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) for the master’s degree grants and to the Municipal Works Agency [Agência Municipal de Obras (AMOB)] of Goiânia-Goiás for the construction of the experimental segment.
References
ABNT. (1986). “Solo-Determinação da massa específica aparente ‘in situ’, com o emprego do frasco de areia.”, Brazilian Association of Technical Standarts, Sao Paulo, Brazil, 1–7 (in Portuguese).
Akbulut, H., and Gürer, C. (2007). “Use of aggregates produced from marble quarry waste in asphalt pavements.” Build. Environ., 42(5), 1921–1930.
Araújo, W. E. L. (2008). “Aproveitamento de resíduos da extração de micaxisto em pavimentos flexíveis.” Master’s degree dissertation, Escola de Engenharia Civil, Programa de Pós-Graduação em Engenharia do Meio Ambiente, Univ. Federal de Goiás, Goiânia, Brazil, 1–142 (in Portuguese).
Ashtiani, R. S., and Little, D. N. (2007). “Acceptability criteria for high fines content aggregate pavement layers.”, International Center for Aggregates Research (ICAR), Texas Transportation Institute, Austin, TX, 1–100.
ASTM. (2003). “Standard test method for use of the dynamic cone penetrometer in shallow pavement applications.”, West Conshohocken, PA.
Batalione, G. (2007). “Estabilização de solos tropicais com a utilização de rejeitos finos de pedreira de uma rocha granítica.” Master’s degree dissertation, Dep. Engenharia Civil e Ambiental, Univ. de Brasília, Federal District, Brazil, 1–172 (in Portuguese).
De Beer, M. (1990). “Use of dynamic cone penetrometer (DCP) in the design of road structures.” Geotechnics in African environment, G. R. Wardle, G. E. Blight, and A. B. Fourie, eds., Balkema, Rotterdam, Netherlands, 167–176.
DNIT. (1994). “Solos e agregados miúdos – determinação da umidade com o emprego do ‘Speedy’.”, National Dept. of Infrastructure and Transportation, Rio de Janeiro, Brazil, 1–4 (in Portuguese).
Huang, Y. H. (2004). Pavement analysis and design, 2nd Ed., Prentice Hall, Upper Saddle River, NJ, 1–775.
Luz, M. P. (2008). “Aproveitamento de filer de pedreiras da região metropolitana de Goiânia em pavimentos flexíveis urbanos—Avaliação técnica e sócio-ambiental.” Doctoral thesis, Univ. Federal de Goiás, Goiânia, Brazil, 1–104 (in Portuguese).
Luz, M. P., Silva, A. L. A., Araujo, W. E. L., and Maia, C. H. (2005). “Avaliação preliminar da utilização de resíduo de pedreira dosado no solo em pavimentação flexível urbana na região metropolitana de Goiânia.” 8th Encontro Nacional sobre Gestão Empresarial e Meio Ambiente (CD-ROM), Rio de Janeiro, Brazil (in Portuguese).
Manning, D., and Vertterlein, J. (2004). “Exploitation and use of quarry fines.”, MIRO Mineral Solutions, Manchester, U.K., 1–60.
Nogami, J. S., and Villibor, D. F. (1995). “Pavimentação de baixo custo com solos lateríticos.” Vilibor, São Paulo, Brazil, 1–213 (in Portuguese).
Pissato, E., and Soares, L. (2006). “Utilização de finos de pedreira em misturas de solo-cimento: Correção granulométrica de um solo argiloso.” Rev. Exacta, 4(1), 143–148 (in Portuguese).
Rezende, L. R. (1999). “Técnicas alternativas para a construção de bases de pavimentos rodoviários.” Master’s dissertation, Dept. de Engenharia Civil e Ambiental, Univ. de Brasília, Federal District, Brazil, 1–169 (in Portuguese).
Rezende, L. R., and Camapum de Carvalho, J. (2003). “The use of quarry waste on pavement construction.” Resour. Conserv. Recycl., 39(1), 91–105.
Rezende, L. R., and Camapum de Carvalho, J. (2004). “The performance of an experimental road constructed from quarry waste.” 6th Int. Symp. on Pavements Unbound (UNBAR 6), Nottingham, England, Pavements Unbound, Netherlands, A.A. Balkema Publishers, Taylor & Francis, Netherlands, 249–257.
Rúbio, M. C., Moreno, F., Belmonte, A., and Menendéz, A. (2010). “Reuse of waste material from decorative quartz solid surfacing in the manufacture of hot bituminous mixes.” Constr. Build. Mater., 24(4), 610–618.
Vale, C. C. L. (1999). “Considerações geotécnicas na recuperação de uma área degradada por mineração de calcário.” Master’s dissertation, Dept. de Engenharia Civil e Ambiental, Univ. de Brasília, Federal District, Brazil, 1–106 (in Portuguese).
Webster, S. L., Brown, R. W., and Porter, J. R. (1994). “Force projection site evaluation using the electric cone penetrometer (ECP) and the dynamic cone penetrometer (DCP).”, Washington, DC, 1–172.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Aug 29, 2013
Accepted: Dec 3, 2013
Published online: Dec 5, 2013
Published in print: Aug 1, 2014
Discussion open until: Sep 23, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.