Technical Papers
Apr 13, 2013

Fresh, Mechanical, and Durability Characteristics of Self-Consolidating Concrete Incorporating Recycled Asphalt Pavements

Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 4

Abstract

This paper investigates the fresh, mechanical, and durability characteristics of self-consolidating concrete incorporating recycled asphalt pavements (SCCRAP). A total of 12 concrete mixtures were prepared and tested. Mixtures were divided into three different groups, with constant water to cementitious materials ratio of 0.37, based on the recycled asphalt pavement (RAP) content: 0, 25, and 50% coarse aggregate replaced by RAP. All mixtures were prepared to achieve a target slump flow equal to or higher than 500 mm (24 in.). The control mixture for each group was prepared with 100 percent portland cement, whereas all other mixtures were designed to have up to 70 percent of the portland cement replaced by a combination of supplementary cementitious materials (SCMs), such as class C fly ash and granulated blast furnace slag. The properties of fresh concrete investigated in this study included flowability, deformability, filling capacity, and resistance to segregation. In addition, the compressive strength at 3, 14, and 28 days; the tensile strength; and the unrestrained shrinkage up to 80 days were investigated. Using up to 70 percent slag as partial replacement of cement in concrete mixtures developed a 28-day compressive strength less than that of the control mixture by 26 and 49% for RAP content of 25 and 50%, respectively. Increasing the RAP content from 0 to 25 and 50% caused the split tensile strength of all mixtures to decrease significantly. Based on the results obtained in this study, it is not recommended to replace the coarse aggregate in self-consolidating concrete with more than 25 percent RAP.

Get full access to this article

View all available purchase options and get full access to this article.

References

ASTM. (1996). “Standard test method for splitting tensile strength of cylindrical concrete specimens.” C496-96, Pennsylvania, PA.
ASTM. (2000). “Standard practice for making and curing concrete test specimens in the laboratory.” C192-07, Vol. 4.02, Pennsylvania, PA, 117–123.
ASTM. (2009a). “Standard test method for slump flow of self-consolidating concrete.” C1611/C1611M-09b, Pennsylvania, PA.
ASTM. (2009b). “Standard test method for passing ability of self-consolidating concrete by j-ring.” C1621/C1621M-09b, Pennsylvania, PA.
ASTM. (2009c). “Standard practice for use of apparatus for the determination of length change of hardened cement paste, mortar, and concrete.” C490/C490M-09, Pennsylvania, PA.
ASTM. (2010). “Standard test method for compressive strength of cylindrical concrete specimens.” C39/C39M-10, Pennsylvania, PA.
ASTM. (2012). “Standard specification for portland cement.” C150/C150M, Pennsylvania, PA.
Collins, R. J. (1976). “Waste products as a potential replacement for aggregates.” Proc., 4th Int. Ash Utilization Symposium, Energy Research and Development Administration, Morgantown Energy Research Center, Morgantown, WV, 93–113.
Foltz, R. B., and Truebe, M. (2003). “Locally available aggregate and sediment production.” Transportation Research Record 1819, Transportation Research Board, Washington, DC, 185–193.
Delwar, M., Fahmy, M., and Taha, R. (1997). “Use of reclaimed asphalt pavement as an aggregate in portland cement concrete.” ACI Mater. J., 94(3), 251–256.
Hossain, K. M. A., and Lachemi, M. (2010). “Fresh, mechanical, and durability characteristics of self-consolidating concrete incorporating volcanic ash.” J. Mater. Civ. Eng., 651–657.
Huang, B., Shu, X., and Burdette, E. (2006). “Mechanical properties of concrete containing recycled asphalt pavements.” Mag. Concr. Res., 58(5), 313–320.
Huang, B., Shu, X., and Guoqiang, L. (2005). “Laboratory investigation of portland cement concrete containing recycled asphalt pavements.” Cem. Concr. Res., 35(10), 2008–2013.
Khatib, J. M. (2008). “Performance of self-compacting concrete containing fly ash.” Constr. Build. Mater., 22(9), 1963–1971.
Khayat, K. (1999). “Workability, testing, and performance of self-consolidating concrete.” ACI Mater. J., 96(3), 346–354.
Khayat, K. H., Paultre, P., and Tremblay, S. (2001). “Structural performance and in-place properties of self-consolidating concrete used for casting highly reinforced columns.” ACI Mater. J., 98(5), 371–378.
Lachemi, M., Hossain, K. M. A., Lambros, V., and Bouzoubaa, N. (2003). “Development of cost-effective self-consolidating concrete incorporating fly ash, slag cement or viscosity modifying admixtures.” ACI Mater. J., 100(5), 419–425.
Mahmoud, E., Masad, E., Nazarian, S., and Abdullah, I. (2010). “Modeling and experimental evaluation of influence of aggregate blending on asphalt mixture strength.” Transportation Research Record 2180, Transportation Research Board, Washington, DC, 48–57.
Ng, P. L., Wong, H. H. C., Ng, I. Y. T., and Kwan, A. K. H. (2007). “Measuring shrinkage of self-consolidating concrete incorporating fly ash and silica fume using fiber-optic sensor.” ACI Mater. J., 242, 211–226.
Ozawa, K., Maekawa, K., Kunishima, H., and Okamura, H. (1989). “Performance of concrete based on the durability design of concrete structures.” Proc., 2nd East-Asia-Pacific Conf. on Structural Engineering and Construction, Vol. 1, Chiang Mai, Thailand, 445–456.
Petersson, O. (1998). Application of self-compacting concrete for bridge castings, Swedish Cement and Concrete Research Institute, Stockholm, Sweden.
Poon, C. S., and Ho, D. W. S. (2004). “A feasibility study on the utilization of r-FA in SCC.” Cement Concr. Res., 34(12), 2337–2339.
Rajaram, V., and Hoagberg, R. K. (1984). “Inventory of aggregates in an expanding urban area.” Bull. Eng. Geol. Environ., 29(1), 315–319.
Rakshvir, M., and Barai, S. V. (2006). “Studies on recycled aggregates-based concrete.” Waste Manage. Res., 24(3), 225–233.
Soo-Duck, H., Khayat, K., and Bonneau, O. (2006). “Performance-based specifications of self-consolidating concrete used in structural applications.” ACI Mater. J., 103(2), 121–129.
Yurugi, M. (1998). “Application of self-compacting concrete in Japan.” Proc., 23rd OWICS Conf., CI-Premier, Singapore, 29–42.

Information & Authors

Information

Published In

Go to Journal of Materials in Civil Engineering
Journal of Materials in Civil Engineering
Volume 26Issue 4April 2014
Pages: 668 - 675

History

Received: Sep 17, 2012
Accepted: Apr 9, 2013
Published online: Apr 13, 2013
Discussion open until: Sep 13, 2013
Published in print: Apr 1, 2014

Permissions

Request permissions for this article.

Authors

Affiliations

Ahmed Ibrahim, Ph.D. [email protected]
A.M.ASCE
Visiting Assistant Professor, Civil Engineering, Parks College of Engineering, Aviation and Technology, Saint Louis Univ., Saint Louis, MO 63103; and Lecturer, Structural Engineering Dept., Zagazig Univ., Zagazig 44519, Egypt (corresponding author). E-mail: [email protected]; [email protected]
Enad Mahmoud, Ph.D. [email protected]
Assistant Professor, Mechanical Engineering, Civil Engineering Program, Univ. of Texas–Pan American, Edinburg, TX 78539; formerly, Assistant Professor, Civil Engineering and Construction Dept., Bradley Univ., 100 Jobst Hall, Peoria, IL 61625. E-mail: [email protected]
Yasser Khodair, Ph.D. [email protected]
Assistant Professor, Civil Engineering and Construction Dept., Bradley Univ., 206 Jobst Hall, Peoria, IL 61625. E-mail: [email protected]
Varun Chowdary Patibandla [email protected]
Graduate Research Assistant, Civil Engineering and Construction Dept., Bradley Univ., 206 Jobst Hall, Peoria, IL 61625. E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share