Shear and Compressibility Behavior of Sand–Tire Crumb Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 10
Abstract
Scrap tire disposal has been a critical environmental problem in many urban cities due to the huge increase in the number of vehicles. Significant research efforts have been devoted in recent years to explore the use of scrap tires in civil engineering application, as reuse or recycling of scrap tires is the preferred option from a waste management perspective. This paper investigates shear and compressibility behavior of sand–tire crumb (S-TC) mixtures for their application in civil engineering projects. Unlike other studies where tire chips or tire shreds were used, shear strength of the S-TC mixtures has been found to decrease with the increase in the amount of tire crumbs in the mixtures. Significant increase in axial strain corresponding to peak deviator stress has been observed. This can be related to the ductility capacity of the mixtures, as confirmed by brittleness tests. It has also been observed that a larger proportion of plastic strain develops after the first cycle of unloading, and hence the settlement associated with the application of the mixtures can be significantly reduced by preloading.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work presented in this paper was supported by University of Wollongong Small Grant 2010 and University of Wollongong UIC International Links Grant 2011/12.
References
Ahmed, I. (1993). “Laboratory study of properties of rubber-soils.” Final Rep., Indiana Dept. of Transp., Joint Highway Research Project, Purdue Univ., West Lafayette, IN.
Anastasopoulos, I., Loli, M., Gerolymos, N., Apostolou, M., and Gazetas, G. (2010). “Soil failure can be used for seismic protection of structures.” Bull. Earthquake Eng., 8(2), 309–326.
ASTM (2008). “Standard practice for use of scrap tires in civil engineering applications.” ASTM Standard D 6270-08, American Society for Testing and Materials, West Conshohocken, PA.
Australian Government. (2010). “Product stewardship for the end of life tyres.” Dept. of Sustainability, Environment, Water, Population and Communities, Canberra, ACT, Australia, 〈http://www.environment.gov.au/settlements/waste/tyres/index.html〉 (Jun. 10, 2013).
Bosscher, P. J., Edil, T. B., and Kuraoka, S. (1997). “Design of highway embankments using tire chips.” J. Geotech. Geoenviron. Eng., 123(4), 295–304.
Edil, T. B., and Bosscher, P. J. (1994). “Engineering properties of tire chips and soil mixtures.” Geotech. Testing J., 17(4), 453–464.
European Tyre, and Rubber Manufacturers’ Association. (2010). End of life tires: A valuable resource with growing potential, Brussels.
Foose, G. J., Benson, C. H., and Bosscher, P. J. (1996). “Sand reinforced with shredded waste tires.” J. Geotech. Eng., 122(9), 760–767.
Gacke, S., Lee, M., and Boyd, N. (1997). “Field performance and mitigation of shredded tire embankment.” Transport. Res. Rec., 1577(1), 81–89.
Genan Business, and Development A/S. (2010). “Comparative life cycle assessment of two options for scrap tire treatment: Material recycling versus tire-derived fuel combustion.”, Prairie Village, KS.
Genan Business, and Development A/S. (2012). “The global amount of scrap tyres is rising.” 〈http://www.genan.eu/tyres-2.aspx〉 (Apr. 4, 2012).
Ghazavi, M., and Sakhi, M. A. (2005). “Influence of optimized tire shreds on shear strength parameters of sand.” Int. J. Geomech., 5(1), 58–65.
Humphrey, D. N. (1996). “Investigation of exothermic reaction in tire shred fill located on SR 100 in Ilwaco, Washington.”, Washington, DC.
Humphrey, D. N., et al. (1993). “Shear strength and compressibility of the tyre chips for use as retaining wall backfill.” Transportation Research Record No. 1422, Lightweight Artificial and Waste Materials for Embankments over Soft Soils, Transportation Research Board, Washington, DC, 29–35.
Indraratna, B., Ionescu, D., and Christie, H. D. (1998). “Shear behavior of railway ballast based on large-scale triaxial tests.” J. Geotech. Geoenviron. Eng., 124(5), 439–449.
Kim, H. K., and Santamarina, J. C. (2008). “Sandrubber mixtures (large rubber chips).” Can. Geotech. J., 45(10), 1457–1466.
Lee, J. S., Dodds, J., and Santamarina, J. C. (2007). “Behavior of rigid-soft particle mixtures.” J. Materials Civil Eng., 19(2), 179–184.
Lee, C., Truong, Q. H., Lee, J. S., and Lee, W. (2010). “Characteristics of rubber-sand particle mixtures according to size ratio.” J. Materials Civil Eng., 22(4), 323–331.
Maher, M. H., and Gray, D. H. (1990). “Static response of sands reinforced with randomly distributed fibers.” J. Geotech. Eng., 116(11), 1661–1677.
Masad, E., Taha, R., Ho, C., and Papagiannakis, T. (1996). “Engineering properties of tire/soil mixtures as a lightweight fill material.” Geotech. Testing J., 19(3), 297–304.
Ngo, A. T., and Valdes, J. R. (2007). “Creep of sand-rubber mixtures.” J. Materials Civil Eng., 19(12), 1101–1105.
Rao, G. V., and Dutta, R. K. (2006). “Compressibility and strength behaviour of sand–tyre chip mixtures.” Geotech. Geol. Eng., 24(3), 711–724.
Rubber Manufacturer Association. (2009). “Scrap tire market in the United States.” 9th Biennial Rep., Washington, DC.
Sheikh, M. N., Tsang, H. H., McCarthy, T. J., and Lam, N. T. K. (2010). “Yield curvature for seismic design of circular reinforced concrete columns.” Mag. Concr. Res., 62(10), 741–748.
Tatlisoz, N., Edil, T. B., and Benson, C. H. (1998). “Interaction between reinforcing geosynthetics and soil tire chip mixtures.” J. Geotech. Geoenviron. Eng., 124(11), 1109–1119.
Topçu, İ. B (1997). “Assessment of the brittleness index of rubberized concretes.” Cement Concr. Res., 27(2), 177–183.
Tsang, H. H. (2008). “Seismic isolation by rubber-soil mixtures for developing countries.” Earthquake Eng. Struct. Dyn., 37(2), 283–303.
Tsang, H. H., Lam, N. T. K., Yaghmaei-Sabegh, S., Sheikh, M. N., Xiong, W., and Shang, S.-P. (2009). “Protecting low-to-medium-rise buildings by scrap tyre-soil mixtures.” Proc., Australian Earthquake Engineering Society (AEES) Conference, AEES, Australia, 8.
Tsang, H. H., Lo, S. H., Xu, X., and Sheikh, M. N. (2012). “Seismic isolation for low-to-medium-rise buildings using granulated rubber-soil mixtures: Numerical study.” Earthquake Eng. Struct. Dyn., 41(14), 2009–2024.
Youwai, S., and Bergado, D. T. (2003). “Strength and deformation characteristics of shredded rubber tire–sand mixtures.” Can. Geotech. J., 40(2), 254–264.
Zornberg, J. G., Viratjandr, C., and Cabral, A. R. (2004). “Behaviour of tire shred–sand mixtures.” Can. Geotech. J., 41(2), 227–241.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 9, 2011
Accepted: Sep 20, 2012
Published online: Sep 23, 2012
Discussion open until: Feb 23, 2013
Published in print: Oct 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.