Air-Void Distribution Analysis of Asphalt Mixture Using Discrete Element Method
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 10
Abstract
Heterogeneous air void distribution is a common phenomenon in asphalt mixtures and is intimately related to the behavior of the asphalt mixture. Air void distribution within an asphalt mixture specimen is related to several factors, such as compaction effort, method of compaction (equipment), and aggregate gradation. In this study, virtual digital specimens generated by an open source discrete element method (DEM) program were utilized to investigate the effect of compaction factors on air void distribution. The compaction processes of a Superpave gyratory compactor (SGC) and a vibratory compactor were simulated by DEM. Effects of aggregate gradation, specimen height, mold size, mold shape, and compaction method on the inhomogeneous distributions of air voids were studied through statistical analyses. The results from DEM simulation were in good agreements with laboratory test results as well as those found in the literature. This research demonstrated that DEM simulation could be a potentially helpful tool for analyzing asphalt mix compaction and selecting appropriate aggregates for asphalt mix design.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abbas, A. (2004). “Simulation of the micromechanical behavior of asphalt mixtures using the discrete element method.” Ph.D. dissertation, Washington State Univ., Pullman, WA.
Abbas, A., Masad, E., Papagiannakis, T., and Harman, T. (2007). “Micromechanical modeling of the viscoelastic behavior of asphalt mixtures using the discrete-element method.” Int. J. Geomech., 7(2), 131–139.
Adhikari, S., and You, Z. (2010). “3D discrete element models of the hollow cylindrical asphalt concrete specimens subject to the internal pressure.” Int. J. Pav. Eng., 11(5), 429–439.
Belheine, N., Plassiard, J.-P., Donzé, F.-V., Darve, F., and Seridi, A. (2009). “Numerical simulation of drained triaxial test using 3D discrete element modeling.” Comput. Geotech., 36(1–2), 320–331.
Buttlar, W. G., and You, Z. (2001). “Discrete element modeling of asphalt concrete: A micro-fabric approach.” Transportation Research Record 1757, Transportation Research Board, Washington, DC, 111–118.
Camborde, F., Mariotti, C., and Donzé, F. V. (2000). “Numerical study of rock and concrete behaviour by discrete element modeling.” Comput. Geotech., 27(4), 225–247.
Chen, F., Drumm, E. C., Guiochon, G., and Suzuki, K. (2008). “Discrete element simulation of 1D upward seepage flow with particle-fluid interaction using coupled open source software.” Proc., 12th Int. Conf. of the Int. Association for Computer Methods and Advances in Geomechanics (IACMAG), International Association for Computer Methods and Advances in Geomechanics (IACMAG), Goa, India, 2483–2489.
Chen, J. (2011). “Discrete element method (DEM) analyses for hot-mix asphalt (HMA) mixture compaction.” Ph.D. dissertation, Univ. of Tennessee, Knoxville, TN.
Chen, J., Huang, B., Chen, F., and Shu, X. (2012). “Application of discrete element method to Superpave gyratory compaction.” Road Mater. Pavement Des., 13(3), 480–500.
Collop, A. C., McDowell, G. R., and Lee, Y. (2004). “Use of the distinct element method to model the deformation behavior of an idealized asphalt mixture.” Int. J. Pavement Eng., 5(1), 1–7.
Collop, A. C., McDowell, G. R., and Lee, Y. W. (2006). “Modelling dilation in an idealised asphalt mixture using discrete element modelling.” Granular Matter, 8(3–4), 175–184.
Cundall, P. A. (1978). Ball—a program to model granular media using the distinct element method, Advanced Technology Group, Dames and Moore, London.
Cundall, P. A. (2001). “A discontinuous future for numerical modeling in geomechanics?” Proc. Inst. Civ. Eng. Geotech. Eng., 149(1), 41–47.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Geotechnique, 29(1), 47–65.
Dai, Q., and You, Z. (2007). “Prediction of creep stiffness of asphalt mixture with micromechanical finite-element and discrete-element models.” J. Eng. Mech., 133(2), 163–173.
Donzé, F., Magnier, S., Daudeville, L., Mariotti, C., and Davenne, L. (1999). “Numerical study of compressive behaviour of concrete at high strain rates.” J. Eng. Mech., 125(10), 1154–1163.
Dubois, V., De La Roche, C., and Burban, O. (2010). “Influence of the compaction process on the air void homogeneity of asphalt mixtures samples.” Constr. Build. Mater., 24(6), 885–897.
Harthong, B., Jérier, J.-F., Dorémus, P., Imbault, D., and Donzé, F.-V. (2009). “Modeling of high-density compaction of granular materials by the Discrete Element Method.” Int. J. Solids Struct., 46(18–19), 3357–3364.
Itasca Consulting Group. (2004). PFC2D manual Ver. 3.1, Minneapolis.
Jerier, J.-F., Richefeu, V., Imbault, D., and Donzé, F.-V. (2010). “Packing spherical discrete elements for large scale simulations.” Comput. Meth. Appl. Mech. Eng., 199(25–28), 1668–1676.
Jing, L. (2000). “Block system construction for three-dimensional discrete element models of fractured rocks.” Int. J. Rock Mech. Min. Sci., 37(4), 645–659.
John, M. T., Corkum, B., Kauffman, C., and Greco, C. (1989). “Discrete numerical model for soil mechanics.” J. Geotech. Eng., 115(3), 379–398.
Kim, H., and Buttlar, W. G. (2005). “Micro mechanical fracture modeling of asphalt mixture using the discrete element method.” Geotechnical Special Publication, n 130–142, American Society of Civil Engineers, Reston, VA, 209–223.
Kim, H., Wagoner, M., and Buttlar, W. (2008). “Simulation of fracture behavior in asphalt concrete using a heterogeneous cohesive zone discrete element model.” J. Mater. Civ. Eng., 20(8), 552–563.
Kozicki, J., and Donze, F. V. (2008). “A new open-source software developed for numerical simulations using discrete modeling methods.” Comput. Meth. Appl. Mech. Eng., 197, 4429–4443.
Liu, Y., Dai, Q., and You, Z. (2009). “Viscoelastic model for discrete element simulation of asphalt mixtures.” J. Eng. Mech., 135(4), 324–333.
Masad, E., and Button, J. (2004). “Implications of experimental measurements and analyses of the internal structure of hot-mix asphalt.” Transportation Research Record 1891, Transportation Research Board, Washington, DC, 212–220.
Masad, E., Muhunthan, B., Shashidhar, N., and Harman, T. (1999). “Quantifying laboratory compaction effects on the internal structure of asphalt concrete.” Transportation Research Record 1681, Transportation Research Board, Washington, DC, 179–185.
Masad, E., Jandhyala, V., Dasgupta, N., Somadevan, N., and Shashidhar, N. (2002). “Characterization of air void distribution in asphalt mixes using X-ray computed tomography.” J. Mater. Civ. Eng., 14(2), 122–129.
Muraya, P. M. (2007). “Homogeneous test specimens from gyratory compaction.” Int. J. Pav. Eng., 8(3), 225–235.
Peng, B., Yuan, W., Li, X., and Chen, Z. (2005). “Bailey method for aggregate grading design of SMA-16.” J. Highway Transp. Res. Dev., 22(10), 23–27 (in Chinese).
Popp, K., and Schiehlen, W. (2008). Ground vehicle dynamics, Springer, Berlin.
Roberts, F. L., Kandhal, P. S., Brown, E. R., Lee, D. Y., and Kennedy, T.W. (1996). Hot mix asphalt materials, mixture design, and construction, 2nd Ed., NAPA Research and Education Foundation, Lanham, MD.
Rousseau, J. (2009). “Multidomain finite and discrete elements method for impact analysis of a concrete structure.” Eng. Struct., 31(11), 2735–2743.
Shu, X., and Huang, B. (2008a). “Dynamic modulus prediction of HMA mixtures based on the viscoelastic micromechanical model.” J. Mater. Civ. Eng., 20(8), 530–538.
Shu, X., and Huang, B. (2008b). “Micromechanics-based dynamic modulus prediction of polymeric asphalt concrete mixtures.” Composites Part B: Engineering, 39(4), 704–713.
Shu, X., and Huang, B. (2009). “Predicting dynamic modulus of asphalt mixtures with differential method.” Road Mater. Pavement Des., 10(2), 337–359.
Simpson, B., and Tatsuoka, F. (2008). “Geotechnics: The next 60 years.” Géotechnique, 58(5), 357–368.
Tashman, L., Masad, E., D'Angelo, J., Bukowski, J., and Harman, T. (2002). “X-ray tomography to characterize air void distribution in Superpave gyratory-compacted specimens.” Int. J. Pavement Eng., 3(1), 19–28.
Thyagarajan, S., Tashman, L., Masad, E., and Bayomy, F. (2010). “The heterogeneity and mechanical response of hot mix asphalt laboratory specimens.” Int. J. Pavement Eng., 11(2), 107–121.
Vavrik, W. R., Huber, G., Pine, W. J., Carpenter, S. H., and Bailey, R. (2002). “Bailey method for gradation selection in hot-mix asphalt mixture design.”, Transportation Research Board, Washington, DC.
Vavrik, W. R., Pine, W. J., Huber, G. A., Carpenter, S. H., and Bailey, R. (2001). “The Bailey method of gradation evaluation: The influence of aggregate gradation and packing characteristics on voids in the mineral aggregate.” J. Assoc. Asphalt Paving Technologists, 70, 132–175.
Wang, L., Zhang, B., Wang, D., and Yue, Z. (2007). “Fundamental mechanics of asphalt compaction through FEM and DEM modeling.” Geotechnical Special Publication, no. 176, American Society of Civil Engineers, Reston, VA, 45–63.
Xie, Y. S., and Zhao, Y. S. (2009). “Numerical simulation of the top coal caving process using the discrete element method.” Int. J. Rock Mech. Min. Sci., 46(6), 983–991.
Yao, M., and Anandarajah, A. (2003). “Three-dimensional discrete element method of analysis of clays.” J. Eng. Mech., 129(6), 585–596.
You, Z., and Buttlar, W. G. (2004). “Discrete element modeling to predict the modulus of asphalt concrete mixtures.” J. Mater. Civ. Eng., 16(2), 140–146.
You, Z., and Buttlar, W. G. (2005). “Application of discrete element modeling techniques to predict the complex modulus of asphalt-aggregate hollow cylinders subjected to internal pressure.” Transportation Research Record 1929, Transportation Research Board, Washington, DC, 218–226.
You, Z., and Buttlar, W. G. (2006). “Micromechanical modeling approach to predict compressive dynamic moduli of asphalt mixtures using the distinct element method.” Transportation Research Record 1970, Transportation Research Board, Washington, DC, 73–83.
You, Z., Adhikari, S., and Dai, Q. (2010). “Air void effect on an idealized asphalt mixture using two-dimensional and three-dimensional discrete element modeling approach.” Int. J. Pav. Eng., 11(5), 381–391.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 25 • Issue 10 • October 2013
Pages: 1375 - 1385
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 30, 2011
Accepted: Aug 16, 2012
Published online: Aug 24, 2012
Discussion open until: Jan 24, 2013
Published in print: Oct 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.