Energy-Based Mechanistic Approach to Characterize Crack Growth of Asphalt Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 9
Abstract
Fatigue cracking is a common distress in asphalt pavements, but most existing models to predict its growth are generally empirical or phenomenological in nature. To fill this gap, this paper aims at developing an energy-based mechanistic approach to model the fatigue crack growth in asphalt mixtures. The core of this approach is establishing the energy balance equations between the apparent energy of the bulk specimen and the true energy of the intact material. A controlled-strain repeated direct tension (RDT) test is used to generate fatigue cracking damage in asphalt mixtures. The true stresses, true strains, and true pseudostrains are simulated through the force equilibrium and energy balance equations. The true stress in a damaged asphalt mixture is found to be the driving force for crack growth; the crack growth in turn aggravates the localization of the true stress/true strain. The ratio of the true stress and the apparent stress in a damaged asphalt mixture is used to calculate the damage density. The evolution of the damage density with repeated loading demonstrates the development of fatigue cracking in the asphalt mixture. In addition to modeling fatigue cracking in asphalt mixtures, the energy-based mechanistic approach developed in this paper can be used with a wide range of tests to predict crack growth of different types of materials because of its mechanical nature.
Get full access to this article
View all available purchase options and get full access to this article.
References
Altus, E. (1991). “Fatigue, fractals, and a modified miner’s rule.” J. Appl. Mech., 58(1), 37–42.
Asphalt Institute. (1981). Thickness design manual series no. 1 (MS-1), 9th Ed., College Park, MD.
Bolzan, P. E., and Huber, G. (1993). “Direct tension test experiments.”, Strategic Highway Research Program, National Research Council, Washington, DC.
Ghuzlan, K. A., and Carpenter, S. H. (2000). “Energy-derived, damage-based failure criterion for fatigue testing.”, Transportation Research Board, National Research Council, Washington, DC, 141–149.
Hashin, Z., and Laird, C. (1980). “Cumulative damage under two level cyclic loading: Some theoretical predictions and test data.” Fatigue. Eng. Mater. Struct., 2(4), 345–350.
Hashin, Z., and Rotem, A. (1978). “A cumulative damage theory of fatigue failure.” Mater. Sci. Eng., 34(2), 147–160.
Inglis, C. E. (1913). “Stresses in a plate due to the presence of cracks and sharp corners.” Trans. Inst. Naval Archit., 55, 219–241.
Jones, D. R. (1993). “SHRP materials reference library: Asphalt cements: A concise data compilation.”, National Research Council, Washington, DC.
Kachanov, L. M. (1958). Introduction to continuum damage mechanics, Kluwer Academic Poblishers, Dordrecht, Netherlands.
Krajcinovic, D. (1996). Damage mechanics, Elsevier, Amsterdam, Netherlands.
Lemaitre, J. (1992). A Course on damage mechanics, Springer-Verlag, Berlin.
Lemaitre, J., and Chaboche, J. L. (1978). “Aspect phenomenologique de la rupture par endommagement.” J. Mech. Applique, 2(3), 317–365.
Little, D. N., Lytton, R. L., Williams, D., and Chen, C. W. (2001). “Fundamental properties of asphalts and modified asphalts—volume 1: Microdamage and microdamage healing.”, Federal Highway Administration, Washington, DC.
Little, D. N., Lytton, R. L., Williams, D., and Kim, Y. R. (1997). “Propagation and healing of microcracks in asphalt concrete and their contributions to fatigue.” Asphalt science and technology, A. M. Usmani, ed., Marcel Dekker, New York, 149–195.
Li, Y., and Metcalf, J. B. (2004). “Fatigue characteristics of asphalt concrete from asphalt slab tests.” J. Mater. Civ. Eng., 16(4), 306–314.
Luo, X., Luo, R., and Lytton, R. L. (2013a). “Characterization of asphalt mixtures using controlled-strain repeated direct tension test.” J. Mater. Civ. Eng., 25(2), 194–207.
Luo, X., Luo, R., and Lytton, R. L. (2013b). “Characterization of fatigue damage in asphalt mixtures using pseudostrain energy.” J. Mater. Civ. Eng., 25(2), 208–218.
Lytton, R. L., Roque, R. L., Uzan, J., Hiltunen, D. R., Fernando, E., and Stoffels, S. M. (1993). “Performance models and validation of test results.”, National Research Council, Washington, DC.
Masad, E., Castelo Branco, V., Little, D., and Lytton, R. L. (2008). “A unified method for the analysis of controlled-strain and controlled-stress fatigue testing.” Int. J. Pavement Eng., 9(4), 233–246.
Monismith, C. L., Epps, J. A., Kasianchuk, D. A., and McLean, D. B. (1971). “Asphalt mixture behavior in repeated flexure.”, Univ. of California, Berkeley, CA.
National Cooperative Highway Research Program (NCHRP). (2002). “2002 design guide, design of new and rehabilitated pavement structure.”, Transportation Research Board, Washington, DC.
Ostergren, W. J., and Krempl, E. (1979). “A uniaxial damage accumulation law for time-varying loading including creep-fatigue interaction.” J. Pressure Vessel Tech., 101(2), 118–124.
Paris, P. C., and Erdogan, F. (1963). “A critical analysis of crack propagation laws.” J. Basic Eng., 85(4), 528–534.
Paris, P. C., and Sih, G. C. (1965). “Stress analysis of cracks.” Proc., Fracture Toughness Testing and Its Applications: A Symposium Presented at the Sixty-Seventh Annual Meeting, ASTM, West Conshohocken, PA.
Schapery, R. A. (1975a). “A theory of crack initiation and growth in visco-elastic media. I: Theoretical development.” Int. J. Fract., 11(1), 141–159.
Schapery, R. A. (1975b). “A theory of crack initiation and growth in visco-elastic media. II: Approximate methods of analysis.” Int. J. Fract., 11(3), 369–388.
Schapery, R. A. (1975c). “A theory of crack initiation and growth in visco-elastic media. III: Analysis of continuous growth.” Int. J. Fract., 11(4), 549–562.
Schapery, R. A. (1978). “A method for predicting crack growth in non-homogeneous visco-elastic media.” Int. J. Fract., 14(3), 293–309.
Superpave Models Team. (1999). “Task F—advanced mixture characterization.”, Dept. of Civil and Environmental Engineering, Arizona State Univ., Tempe, AZ.
Suresh, S. (1991). Fatigue of materials, Cambridge University Press, Cambridge, UK.
Tayebali, A., Deacon, J. A., Coplantz, J. S., Harvey, J. T., Finn, F., and Monismith, C. L. (1994). “Fatigue response of asphalt-aggregate mixes.”, National Research Council, Washington, DC.
Tayebali, A. A., Rowe, G. M., and Sousa, J. B. (1992). “Fatigue response of asphalt–aggregate mixtures.” J. Assoc. Asphalt Paving Technol., 61, 333–360.
Texas Dept. of Transportation. (2004). Standard specifications for construction and maintenance of highways, streets, and bridges, Austin, TX, 〈ftp://ftp.dot.state.tx.us/pub/txdot-info/des/specs/specbook.pdf〉 (Mar. 2012).
Van Dijk, W. (1975). “Practical fatigue characterization of bituminous mixes.” J. Assoc. Asphalt Paving Technol., 44, 38–74.
Walubita, L. F., Epps Martin, A., Glover, C. J. A., and Lytton, R. L. (2006). “Computation of pseudo strain energy and Paris law fracture coefficients from surface energy and uniaxial strain-controlled tension test data.” Int. J. Pavement Eng., 7(3), 167–178.
Wang, L., Wang, Y., Li, Q., and Flintsch, G. (2007). “Stress concentration factor as a performance indicator for asphalt mixes.” Proc., Symp. on the Mechanics of Flexible Pavements, ASCE, Reston, VA.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 25 • Issue 9 • September 2013
Pages: 1198 - 1208
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Mar 7, 2012
Accepted: Aug 21, 2012
Published online: Aug 30, 2012
Discussion open until: Jan 30, 2013
Published in print: Sep 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.