Fractional Characteristics of Coal Fly Ash for Beneficial Use
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 1
Abstract
As a primary by-product of coal combustion produced in large quantities, coal fly ash is a material receiving considerable interest for potential large-scale engineering applications. However, the beneficial use of coal fly ash in concrete production and contaminant removal, which have divergent constraints to sorption capacity, requires a more complete understanding of the surface and sorptive characteristics of fly ash. A systematic analysis of fly ash particle size fractions established linkages between particle size, particle morphology, unburned carbon content, surface area, and sorption capacity. Unburned carbon was enriched in fly ash fractions of the largest particle sizes and associated with irregularly shaped particles. Further, most of the surface area and sorption capacity of fly ash could be attributed to unburned carbon. More importantly, unburned carbon content, specific surface area, and methylene blue sorption capacity were shown to strongly correlate to one another, providing a potentially quantitative basis for understanding the surface properties of fly ash and developing more effective process options to enhance the fly ash sorption behavior desirable for specific engineering applications.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Zhenwei Zhu was partly supported by a graduate assistanship from the Southeastern Transportation Center at the University of Tennessee.
References
Ahmaruzzaman, M. (2010). “A review on the utilization of fly ash.” Prog. Energy Combust. Sci., 36(3), 327–363.
Cains, P. W., McCausland, L. J., Fernandes, A. R., and Dyke, P. (1997). “Polychlorinated dibenzo--dioxins and dibenzofurans formation in incineration: Effects of fly ash and carbon source.” Environ. Sci. Technol., 31(3), 776–785.
Doğan, M., Alkan, M., Türkyilmaz, A., and Özdemir, Y. (2004). “Kinetics and mechanism of removal of methylene blue by adsorption onto perlite.” J. Hazard. Mater., 109(1–3), 141–148.
Fan, M. H., Brown, R. C., Wheelock, T. D., Cooper, A. T., Nomura, M., and Zhuang, Y. H. (2005). “Production of a complex coagulant from fly ash.” Chem. Eng. J., 106(3), 269–277.
Freeman, E., Gao, Y.-M., Hurt, R., and Suuberg, E. (1997). “Interactions of carbon-containing fly ash with commercial air-entraining admixtures for concrete.” Fuel, 76(8), 761–765.
Hall, M. L., and Livingston, W. R. (2002). “Fly ash quality, past, present and future, and the effect of ash on the development of novel products.” J. Chem. Technol. Biotechnol., 77(3), 234–239.
Hower, J. C., Maroto-Valer, M. M., Taulbee, D. N., and Sakulpitakphon, T. (2000). “Mercury capture by distinct fly ash carbon forms.” Energy Fuels, 14(1), 224–226.
Hurt, R. H., and Gibbins, J. R. (1995). “Residual carbon from pulverized coal fired boilers: 1. Size distribution and combustion reactivity.” Fuel, 74(4), 471–480.
Itskos, G., Koukouzas, N., Vasilatos, C., Megremi, I., and Moutsatsou, A. (2010). “Comparative uptake study of toxic elements from aqueous media by the different particle-size-fractions of fly ash.” J. Hazard. Mater., 183(1–3), 787–792.
Külaots, I., Hurt, R. H., and Suuberg, E. M. (2004). “Size distribution of unburned carbon in coal fly ash and its implications.” Fuel, 83(2), 223–230.
Kutchko, B. G., and Kim, A. G. (2006). “Fly ash characterization by SEM-EDS.” Fuel, 85(17–18), 2537–2544.
Lee, S. H., Sakai, E., Daimon, M., and Bang, W. K. (1999). “Characterization of fly ash directly collected from electrostatic precipitator.” Cem. Concr. Res., 29(11), 1791–1797.
Lussier, M. G., Shull, J. C., and Miller, D. J. (1994). “Activated carbon from cherry stones.” Carbon, 32(8), 1493–1498.
Maroto-Valer, M. M., Taulbee, D. N., and Hower, J. C. (2001). “Characterization of differing forms of unburned carbon present in fly ash separated by density gradient centrifugation.” Fuel, 80(6), 795–800.
Pedersen, K. H., Jensen, A. D., Skjøth-Rasmussen, M. S., and Dam-Johansen, K. (2008). “A review of the interference of carbon containing fly ash with air entrainment in concrete.” Prog. Energy Combust. Sci., 34(2), 135–154.
Shanthakumar, S., Singh, D. N., and Phadke, R. C. (2010). “Methodology for determining particle-size distribution characteristics of fly ashes.” J. Mater. Civ. Eng., 22(5), 435–442.
Shirai, H., Tsuji, H., Ikeda, M., and Kotsuji, T. (2009). “Influence of combustion conditions and coal properties on physical properties of fly ash generated from pulverized coal combustion.” Energy Fuels, 23(7), 3406–3411.
Siddique, R. (2010). “Utilization of coal combustion by-products in sustainable construction materials.” Resour. Conserv. Recycl., 54(12), 1060–1066.
Styszko-Grochowiak, K., Golaś, J., Jankowski, H., and Koziński, S. (2004). “Characterization of the coal fly ash for the purpose of improvement of industrial on-line measurement of unburned carbon content.” Fuel, 83(13), 1847–1853.
Vasanth Kumar, K., Ramamurthi, V., and Sivanesan, S. (2005). “Modeling the mechanism involved during the sorption of methylene blue onto fly ash.” J. Colloid Interface Sci., 284(1), 14–21.
Wang, S. B., Boyjoo, Y., Choueib, A., Ng, E., Wu, H. W., and Zhu, Z. H. (2005). “Role of unburnt carbon in adsorption of dyes on fly ash.” J. Chem. Technol. Biotechnol., 80(10), 1204–1209.
Wang, S. B., and Wu, H. W. (2006). “Environmental-benign utilisation of fly ash as low-cost adsorbents.” J. Hazard. Mater., 136(3), 482–501.
Wang, X. Q., Liang, C. D., and Dai, S. (2008). “Facile synthesis of ordered mesoporous carbons with high thermal stability by self-assembly of resorcinol-formaldehyde and block copolymers under highly acidic conditions.” Langmuir, 24(14), 7500–7505.
Wen, H. F., Baugh, J., Edil, T., and Wang, J. A. (2011). “Cementitious high-carbon fly ash used to stabilize recycled pavement materials as base course.”, Transportation Research Board, Washington, DC, 110–113.
Yu, J., Külaots, I., Sabanegh, N., Gao, Y., Hurt, R. H., Suuberg, E. S., and Mehta, A. (2000). “Adsorptive and optical properties of fly ash from coal and petroleum coke co-firing.” Energy Fuels, 14(3), 591–596.
Yüksel, S., and Yürüm, Y. (2009). “Removal of boron from aqueous solutions by adsorption using fly ash, zeolite, and demineralized lignite.” Sep. Sci. Technol., 45(1), 105–115.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Oct 31, 2011
Accepted: Apr 19, 2012
Published online: Apr 23, 2012
Published in print: Jan 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.