Artificial Neural Network Modeling for Dynamic Modulus of Hot Mix Asphalt Using Aggregate Shape Properties
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 1
Abstract
Over the past few years, many regression-based and artificial neural network (ANN)-based models have been developed to estimate the dynamic modulus of hot mix asphalt (HMA). These models use the gradation of aggregates and the volumetric properties of compacted samples as input variables to the model. However, none of these models use aggregate shape parameters (i.e., angularity, texture, form, and sphericity) in the development of the model. Recently, researchers have expressed concerns that the shape parameters of aggregates need to be considered in the estimation of dynamic modulus. The primary objective of this study was to develop an ANN-based model for the estimation of dynamic modulus of HMA using aggregate shape parameters. The dynamic modulus of 20 different HMA mixes composed of various sources, sizes, types of aggregates, and different volumetric properties were measured in the laboratory. The shape parameters of different sizes of coarse and fine aggregates were measured with an automated aggregate image measurement system (AIMS). An ANN-based model was developed to consider the following input variables: aggregate shape parameters (i.e., angularity, texture, form, and sphericity), frequency, asphalt viscosity, and air voids of compacted samples. A sensitivity analysis of each model parameter was conducted by correlating these parameters with dynamic modulus. It is expected that this study will be helpful in predicting the dynamic modulus of HMA using aggregate shape parameters.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors express their sincere gratitude to Haskell Lemon Construction Company, Oklahoma City, Oklahoma, for their assistance during every phase of this project. The authors greatly appreciate the help of Mr. Brian Wolfe and Mr. Asif Imran during different phases of this project.
References
AASHTO. (2006). “Standard method of test for determining dynamic modulus of hot-mix asphalt concrete mixtures.” TP62-06, Washington, DC.
AASHTO. (2010). “Determining aggregate shape properties by means of digital image analysis.”, Washington, DC.
Alvarado, C., Mahmoud, E., Abdallah, I., Masad, E., Nazarian, S., Tandon, V., and Button, J. (2006). “Feasibility of quantifying the role of coarse aggregate strength on resistance to load in HMA.”, Center for Transportation Infrastructure Systems, Univ. of Texas, El Paso, TX.
Aragao, F. T., Kim, Y., and Karki, P. (2010). “Semi-empirical, analytical, and computational predictions of dynamic modulus of asphalt concrete mixtures.” CD-ROM Presentation, Transportation Research Board, Washington, DC.
ASTM. (2009). “Viscosity-temperature chart for asphalt.” Annual book of ASTM standards, Vol. 0.0403, D2493, West Conshohocken, PA.
Bari, J., and Witczak, M. W. (2006). “Development of new revised version of the Witczak predictive model for hot mix asphalt mixtures.” J. Assoc. Asphalt Paving Technol., 75, 381–423.
Bonaquist, R. F. (2003). “Simple performance tester for suparpave mix design.” Appendix B, Transportation Research Board, Washington, DC.
Brown, R. R., and Bassett, C. E. (1990). “Effects of maximum aggregate size on rutting potential and other properties of asphalt–aggregate mixtures.”, Transportation Research Board, Washington, DC, 107–119.
Ceylan, H., Gopalakrishnan, K., and Kim, S. (2008). “Advanced approaches to hot-mix asphalt dynamic modulus prediction.” Can. J. Civ. Eng., 35(7), 699–707.
Ceylan, H., Gopalakrishnan, K., and Kim, S. (2009a). “Looking to the future: The next generation hot mix asphalt dynamic modulus predictions models.”Int. J. Pavement Eng., 10(5), 341–352.
Ceylan, H., Schwartz, C. W., Kim, S., and Gopalakrishnan, K. (2009b). “Accuracy of predictive models for dynamic modulus of hot-mix asphalt.” J. Mater. Civ. Eng., 21(6), 286–293.
Chehab, G. R. (2002). “Characterization of asphalt concrete in tension using a visco-elasto-plastic model.” Ph.D. dissertation, North Carolina State Univ., Raleigh, NC.
Dai, Q. (2010). “Prediction of dynamic modulus and phase angle of stone-based composites using a micromechanical finite-element approach.” J. Mater. Civ. Eng., 22(6), 618–627.
Demircan, E., Harendra, S., and Vipulanandan, C. (2011). “Artificial neural network and nonlinear models for gelling time and maximum curing temperature rise in polymer grouts.” J. Mater. Civ. Eng., 23(4), 372–377.
Far, M. S. S., Underwood, B. S., Ranjithan, S. R., Kim, Y. R., and Jackson, N. (2009). “Application of artificial neural networks for estimating dynamic modulus of asphalt concrete.”, Transportation Research Board, Washington, DC, 173–186.
Fletcher, T., Chandan, C., Masad, E., and Sivakumar, K. (2002). “Measurement of aggregate texture and its influence on hot mix asphalt permanent deformation.” J. Test. Eval., 30(6), 1–8.
Goh, S. W., You, Z., Williams, R. C., and Xinjun, L. (2011). “Preliminary dynamic modulus criteria of HMA for field rutting of asphalt pavements: Michigan’s experience.” J. Transp. Eng., 137(1), 37–45.
Harran, G., and Shalaby, A. (2009). “Improving the prediction of the dynamic modulus of fine-graded asphalt concrete mixtures at high temperatures.” Can. J. Civ. Eng., 36(2), 180–190.
Kandhal, P. S., and Mallick, R. B. (2001). “Effect of mix gradation on rutting potential of dense-graded asphalt mixtures.”, Transportation Research Board, Washington, DC, 146–151.
Kuo, C.-Y. (2002). “Correlating permanent deformation characteristics of hot mix asphalt with aggregate geometric irregularities.” J. Test. Eval., 30(2), 136–144.
Kutay, M. E., Arambula, E., Gibson, N., and Youtcheff, J. (2010). “Three-dimensional image processing methods to identify and characterize aggregates in compacted asphalt mixtures.” Int. J. Pavement Eng., 11(6), 511–528.
Lacroix, A., Kim, Y. R., and Ranjithan, S. R. (2008). “Backcalcualtion of dynamic modulus from resilient modulus of asphalt concrete with an artificial neural network.”, Transportation Research Board, Washington, DC, 107–113.
Liu, Y., and You, Z. (2011). “Discrete-element modeling: Impacts of aggregate sphericity, orientation, and angularity on creep stiffness of idealized asphalt mixtures.” J. Eng. Mech., 137(4), 294–303.
Lynn, T., James, R. S., Wu, P. Y., and Jared, D. M. (2007). “Effect of aggregate degradation on volumetric properties of Georgia’s hot-mix asphalt.”, Transportation Research Board, Washington, DC, 123–131.
Masad, E. A. (2005). “Aggregate imaging system (AIMS) basics and applications.”, Texas Transportation Institute, Texas A&M Univ. System, College Station, TX.
Masad, E., Al-Rousan, T., Bathina, M., McGahan, J., and Spiegelman, C. (2007). “Analysis of aggregate shape characteristics and its relationship to HMA performance.” Road Mater. Pavement Des., 8(2), 317–350.
Masad, E., Little, D. N., Tashman, L., Saadeh, S., Al-Rousan, T., and Sukhwani, R. (2003). “Evaluation of aggregate characteristics affecting HMA concrete performance.”, Aggregate Foundation of Technology, Research, and Education, Arlington, VA.
Masad, E., Olcott, D., White, T., and Tashman, L. (2001). “Correlation of fine aggregate imaging shape indices with asphalt mixture performance.”, Transportation Research Board, Washington, DC, 148–156.
Mohammad, L. N., Saadeh, S., Obulareddy, S., and Cooper, S. (2008). “Characterization of Louisiana asphalt mixtures using simple performance tests.” J. Test. Eval., 36(1), 1–12.
National Cooperative Highway Research Program (NCHRP). (2004). “Development of the 2002 guide for the design of new and rehabilitated pavement structures.”, Transportation Research Board, Washington, DC.
Pan, T., Tutumluer, E., and Carpenter, S. H. (2006). “Effect of coarse aggregate morphology on permanent deformation behavior of hot mix asphalt.” J. Transp. Eng., 132(7), 580–589.
Pellinen, T. K., and Witczak, M. W. (2002). “Use of stiffness of hot-mix asphalt as a simple performance test.”, Transportation Research Board, Washington, DC, 80–90.
Roberts, F. L., Kandhal, P. S., Brown, E. R., Lee, D., and Kennedy, T. W. (1996). Hot mix asphalt materials, mixture design and construction, 2nd Ed., NAPA Education Foundation, Lanham, MD.
Singh, D. V., Zaman, M., and Commuri, S. (2011). “Evaluation of predictive models for estimating dynamic modulus of HMA mixes used in Oklahoma.”, Transportation Research Board, 57–72.
Tarefder, R. A., White, L., and Zaman, M. (2005). “Development and application of a rut prediction model for flexible pavements.”, Transportation Research Board, Washington, DC, 201–209.
Tran, N. H., and Hall, K. D. (2006). “An examination of strain levels used in the dynamic modulus testing.” J. Assoc. Asphalt Paving Technol., 75, 321–343.
Wang, L., Lane, D. S., Yang, L., and Druta, C. (2008). “Portable image analysis system for characterizing aggregate morphology.”, Virginia Transportation Research Council, Charlottesville, VA.
Witczak, M., Kaloush, K., and Von Quintus, H. (2002). “Pursuit of the simple performance test for asphalt mixture rutting.” J. Assoc. Asphalt Paving Technol., 71, 671–691.
Xiao, F., and Amirkhanian, S. N. (2009). “Artificial neural network approach to estimating stiffness behavior of rubberized asphalt concrete containing reclaimed asphalt pavement.” J. Transp. Eng., 135(8), 580–589.
Xiao, F., Putman, B. J., and Amirkhanian, S. N. (2011). “Viscosity prediction of CRM binders using artificial neural network approach.” Int. J. Pavement Eng., 12(5), 485–495.
You, Z., and Buttlar, W. G. (2006). “Micromechanical modeling approach to predict compressive dynamic moduli of asphalt mixtures using the distinct element method.”, Transportation Research Board, Washington, DC, 73–83.
Zaman, M., Solanki, P., Ebrahimi, A., and White, L. (2010). “Neural network modeling of resilient modulus using routine subgrade soil properties.” Int. J. Geomech., 10(1), 1–12.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Oct 6, 2011
Accepted: Apr 18, 2012
Published online: Apr 20, 2012
Published in print: Jan 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.