Rheological and Chemical Properties of Hydrated Lime and Polyphosphoric Acid–Modified Asphalts with Long-Term Aging
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 5
Abstract
The rheological and chemical properties of hydrated lime-polyphosphoric acid (PPA)–modified asphalt binders before and after laboratory oxidative aging were investigated through dynamic shear rheometer (DSR) and nuclear magnetic resonance (NMR) tests. Ten percent by weight of hydrated lime was mixed with 1.5% by weight of PPA-modified asphalt binders. The neat asphalts and multimodified asphalts were subjected to the pressure aging vessel test at a pavement service temperature of 60°C for different durations. The rheological properties of unaged and aged modified asphalts were measured with a DSR at various temperatures. NMR was used to investigate whether hydrated lime reacts with PPA. The rheological results indicate that the addition of hydrated lime to PPA-modified asphalt binders cancels the stiffening effect of PPA. In other words, the addition of PPA to asphalt increases the high-temperature performance grade (PG). The addition of hydrated lime to PPA-modified asphalt removes the benefit of the high-temperature PG that PPA provided. Furthermore, hydrated lime reduces the rate of oxidative age hardening. The interaction between hydrated lime, PPA, and asphalt binders is asphalt-type-dependent. The interaction between sol-type asphalts and hydrated lime and PPA is different from that of gel-type asphalts.
Get full access to this article
View all available purchase options and get full access to this article.
Disclaimer
This document is disseminated under the sponsorship of the Department of Transportation in the interest of information exchange. The U.S. Government assumes no liability for its contents or use thereof.
The contents of this report reflect the views of Western Research Institute, which is responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official views of the policy of the U.S. Department of Transportation. Mention of specific brand names of equipment does not imply endorsement by the U.S. Department of Transportation or Western Research Institute.
Acknowledgments
The writers gratefully acknowledge the Federal Highway Administration, U.S. Department of Transportation, for financial support of this project under Contract no. USDOTDTFH61-99C-00022. Thanks are expressed to Dr. Bill Tuminello and Mr. Fred Turner for helpful discussions and manuscript prereview. Thanks are also expressed to Ms. Jackie Greaser for preparation of the manuscript.
References
Abdelrahman, M. A. (2005). “Investigating binder flushing of SP-2 mixes.” Nebraska Dept. of Roads, NDOR Research Project Number P559.
Anderson, D. A., Le Hir, Y. M., Planche, J.-P., and Martin, D. (2002). “Zero shear viscosity of asphalt binders.” Transportation Research Record 1810, Transportation Research Board, Washington, DC, 54–62.
Arnold, T., Needham, S. P., and Youtcheff, J. (2009). “Use of phosphoric acid as a modifier for hot-mix asphalt.” TRB 88th Annual Meeting Compendium of Papers (DVD), Transportation Research Board, Washington, DC, paper #09-1564.
Baumgardner, G. L., Masson, J.-F., Hardee, J. R., Menapace, A. M., and Williams, A. G. (2005). “Polyphosphoric acid modified asphalt-proposed mechanisms.” J. Assoc. Asphalt Paving Technol., 74, 283–305.
Bonemazzi, F., and Giavarini, C. (1999). “Shifting the bitumen structure from sol to gel.” J. Pet. Sci. Eng., 22, 17–24.
Chin, C., and Oliver, J. (2007). “Polyphosphoric acid modified binders.” Austroads Technical Report, Austroads Publication No. AP-T87/07, Austroads Inc., Sydney, Australia.
Christensen, D. W., and Anderson, D. A. (1992). “Interpretation of dynamic mechanical test data for paving grade asphalt.” J. Assoc. Asphalt Paving Technol., 61, 67–116.
Christensen, D., and Bonaquist, R. (2009). “Analysis of HMA fatigue data using the concepts of reduced loading cycles and endurance limit.” J. Assoc. Asphalt Paving Technol., 78, 377–416.
Cross, M. (1965). “Rheology of non-Newtonian fluid: A new flow equation for pseudoplastic systems.” J. Colloid Sci., 20, 417–437.
Daranga, C., Clopotel, C. S., Mofolasayo, A., and Bahia, H. (2009). “Storage stability and effect of mineral surface on polyphosphoric acid (PPA) modified asphalt binders.” TRB 88th Annual Meeting Compendium of Papers (DVD), Transportation Research Board, Washington, DC, paper #09-2973.
De Filippis, P., Giavarini, C., and Scarsella, M. (1995). “Improving the aging resistance of straight run bitumens by addition of phosphorus compounds.” Fuel, 74(6), 836–841.
De Filippis, P., Giavarini, C., and Scarsella, M. (1996). “An integrated process for stabilization and upgrading of residues and bitumens.” Fuel Sci. Technol. Int., 14(6), 821–838.
Domke, C. H., Liu, M., Davison, R. R., Bullin, J. A., and Glover, C. J. (1997). “Study of strategic highway research program pressure aging vessel procedure using long-term, low temperature aging experiments and asphalt kinetics.” Transportation Research Record 1586, Transportation Research Board, Washington, DC, 10–15.
Ferry, J. D. (1961). Viscoelastic properties of polymers. Wiley, New York.
Giavarini, C., Mastrofini, D., and Scarsella, M. (2000). “Macrostructure and rheological properties of chemically modified residues and bitumens.” Energy Fuels, 14, 495–502.
Heithaus, J. (1962). “Measurement and significance of asphaltene peptization,” J. Inst. Pet., 48, 45–53.
Ho, S., Zanzotto, L., and MacLeod, D. (2001). “Impact of chemical modification on the composition and properties of asphalt binder.” Proc., Canadian Technical Asphalt Association, XLVI, Victoria, BC, 153–170.
Ho, S., Zanzotto, L., and MacLeod, D. (2002). “Impact of different types of modification on low temperature tensile strength and tcritical of asphalt binders.” Transportation Research Record 1810, Transportation Research Board, Washington, DC.
Huang, S.-C., Petersen, C. J., Robertson, R. E., and Branthaver, J. F. (2002). “Effect of hydrated lime on long-term oxidative aging characteristics of asphalt.” Transportation Research Record 1810, Transportation Research Board, Washington, DC, 17–24.
Huang, S.-C., Turner, T. F., Miknis, F. P., and Thomas, K. P. (2008a). “Long-term aging characteristics of polyphosphoric acid modified asphalts.” Transportation Research Record 2051, Transportation Research Board, Washington, DC, 1–7.
Huang, S.-C., Turner, T. F., and Thomas, K. P. (2008b). “The influence of moisture on the aging characteristics of asphalt binders.” Proc., 4th Eurasphalt & Eurobitume Congress, Brussels, Belgium.
King, G., Bishara, S. W., and Fager, G. (2002). “Acid/base chemistry for asphalt modification.” J. Assoc. Asphalt Paving Technol., 71, 147–175.
Lau, C. K., Lunsford, K. M., Glover, C. J., Davison, R. R., and Bullin, J. A. (1992). “Reaction rates and hardening susceptibilities as determined from POV aging of asphalts.” Transportation Research Record 1342, Transportation Research Board, Washington, DC, 50–57.
Little, D., and Petersen, J. C. (2005). “Unique effects of hydrated lime filer on the performance-related properties of asphalt cements: Physical and chemical interactions revisited.” J. Mater. Civ. Eng., 17(2), 207–218.
Masson, J.-F., Collins, P., Woods, J., Bundaloperc, S., and Margeson, J. (2009). “Chemistry and effects of polyphosphoric acid on the microstructure, molecular mass and glass transition temperatures of asphalts.” J. Assoc. Asphalt Paving Technol., 78, 455–490.
Miknis, F. P., and Schuster, W. C. (2009). “NMR study of hydrated lime and limestone in polyphosphoric acid modified bitumen.” Road Mater. Pavement Des., 10(4), 815–831.
Miknis, F. P., and Thomas, K. P. (2008). “NMR analysis of polyphosphoric acid-modified bitumens.” Road Mater. Pavement Des., 9, 59–72.
Orange, G., Dupuis, D., Martin, J.-V., Farcas, F., Such, C., and Marcant, B. (2004). “Chemical modification of bitumen through polyphosphoric acid: Properties-microstructure relationship.” Proc., 3rd Eurasphalt & Eurobitume Congress, Book I, Brussels, Belgium, 733–745.
Petersen, J. C., Branthaver, J. F., Robertson, R. E., Harnsberger, P. M., Duvall, J. J., and Ensley, E. K. (1993). “Effects of physicochemical factors on asphalt oxidation kinetics.” Transportation Research Record 1391, Transportation Research Board, Washington, DC, 1–10.
Robertson, R. E., et al. (2005). “Fundamental properties of asphalts and modified asphalts, volume II: Final report, new/improved methods.” Contract No. DTFH61-99C-00022, Federal Highway Administration, Washington, DC.
Sybilski, D. (1996). “Zero-shear viscosity of bituminous binder and its relation to bituminous mixture’s rutting resistance.” Transportation Research Record 1535, Transportation Research Board, Washington, DC, 15–21.
Traxler, R. N. (1961). Asphalt: Its composition, properties and uses. Reinhold, New York.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Nov 15, 2009
Accepted: Oct 28, 2010
Published online: Oct 30, 2010
Published in print: May 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.