Monitoring Corrosion in Oxide and Chloride Environments Using Ultrasonic Guided Waves
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 2
Abstract
Ultrasonic guided waves have been used for monitoring progression of rebar corrosion in concrete in chloride and oxide environments. The effect of rates of corrosion in the two environments on the ultrasonic signals is reported. Surface- and core-seeking guided wave modes were used to monitor beams undergoing accelerated impressed current corrosion in the presence (chloride corrosion) and absence of chlorides (oxide corrosion). Effective combination of guided wave modes could relate to the differences in corrosion mechanisms and rates in the two environments. Ultrasonic test results correlated well with that of the destructive tests.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The fund received from the Department of Science and Technology, Government of India, and All India Council of Technical Education is gratefully acknowledged. Dr. Tribikram Kundu, University of Arizona, visited the health monitoring laboratory of the university on an NSF grant. The writers acknowledge his advice on the study.
References
Andrade, C., Alonso, M. C., and Molina, F. J. (1993). “Cover cracking as a function of rebar corrosion. Part I: Experimental tests.” Mater. Struct., 26, 453–464.
Beard, M. D. (2002). “Guided wave inspection of embedded cylindrical structures.” Ph.D. thesis, Univ. of London, London.
Broomfield, J. P. (2007). “Corrosion of steel in concrete: Understanding, investigation and repair.” 2nd Ed., Taylor and Francis, U.K.
Ervin, B. L., Kuchma, D. A., Bernhard, J. T., and Reis, H. (2009). “Monitoring corrosion of rebar embedded in mortar using high frequency guided ultrasonic waves.” J. Eng. Mech., 135(1), 9–19.
Ervin, B. L., and Reis, H. (2008). “Longitudinal guided waves for monitoring corrosion in reinforced mortar.” Meas. Sci. Technol., 19(1), 1–19.
Gaydecki, P. A., Burdekin, F. M., Damaj, W., John, D. G., and Payne, P. A. (1992). “Digital deconvolution analysis of ultrasonic signals influenced by the presence of longitudinally aligned steel cables in pre-stressed concrete.” Meas. Sci. Technol., 3(9), 909–917.
He, C., Van Velsor, J. K., Lee, C. M., and Rose, J. L. (2006). “Health monitoring of rock bolts using ultrasonic guided waves, quantitative nondestructive evaluation.” Proc., AIP Conf. 820, AIP, Reston, Va., 195–201.
Kundu, T., Banerjee, S., and Jata, K. V. (2006). “An experimental investigation of guided wave propagation in corrugated plates showing stop and pass bands.” J. Acoust. Soc. Am., 120(3), 1217–1226.
Miller, T., Hauser, C. J., and Kundu, T. (2002). “Nondestructive inspection of corrosion and delamination at the concrete-steel reinforcement interface.” Proc., ASME NDE Div. Symp., ASME, New Orleans, 23, 121–128.
Na, W., Kundu, T., and Ehsani, M. R. (2002). “Ultrasonic guided waves for steel bar concrete interface testing.” Mater. Eval., 60(3), 437–444.
Na, W., Kundu, T., and Ehsani, M. R. (2003a). “Lamb waves for detecting delamination between steel bars and concrete.” Comput. Aided Civ. Infrastruct. Eng., 18, 58–63.
Na, W., Kundu, T., and Ehsani, M. R. (2003b). “A comparison of steel/concrete and glass fiber reinforced polymers/concrete interface testing by guided waves.” Mater. Eval., 61, 155–161.
Pavlakovic, B. N., and Cawley, P. (2000). DISPERSE user’s manual version 2.0.1.1, Imperial College, Univ. of London, London.
Pavlakovic, B. N., Lowe, M. J. S., and Cawley, P. (2001). “High frequency low loss ultrasonic modes in imbedded bars.” Int. J. App. Mech., 68, 67–75.
Reis, H., Ervin, B. L., Kuchma, D. A. and Bernhard, J. T., (2005).“Estimation of corrosion damage in steel reinforced mortar using guided waves.” J. Pressure Vessel Technol., 127, 255–261.
Sharma, S., and Mukherjee, A. (2010). “Longitudinal guided waves for monitoring chloride corrosion in reinforcing bars in concrete.” Struct. Health Monit., 9(6), 555–567.
Simon, P. (2004). “Improved current distribution due to a unique anode mesh placement in a steel reinforced concrete parking garage slab CP system.” NACE corrosion 2004, Paper No. 04345, NACE International, New Orleans.
Wu, F., and Chang, F. K. (2006). “Debond detection using embedded piezoelectric elements in reinforced concrete structures. I: Experiment.” Struct. Health Monit., 5, 5–15.
Information & Authors
Information
Published In
Copyright
© 2011 ASCE.
History
Received: Oct 9, 2009
Accepted: Jun 21, 2010
Published online: Jan 14, 2011
Published in print: Feb 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.