External Iterative Coupling Strategy for Surface-Subsurface Flow Calculations in Surface Irrigation
Publication: Journal of Irrigation and Drainage Engineering
Volume 136, Issue 10
Abstract
Coupling the unsteady open-channel flow equations of surface irrigation with the equation of variably saturated porous media flow is a computationally complex problem because of the dependence of infiltration on surface-flow depths. Several models of this coupled process have been developed, all of which solve the surface and subsurface flow iteratively at each time step of the surface-flow solution. This study presents an alternative strategy, in which stand-alone surface and subsurface-flow models are used to conduct the calculations sequentially and iteratively at the time level of the irrigation event. At each iteration, the subsurface-flow results are computed using the surface-flow depths generated by the surface-flow model at the current iteration. Infiltration results computed at selected computational nodes are fitted to an empirical infiltration function, and then fed back to the surface-flow model. The proposed strategy, labeled external iterative coupling, was prototyped for border and basin irrigation systems using the WinSRFR and HYDRUS-1D models. The proposed procedure produced irrigation performance results comparable to those generated with an internally coupled model, even when using a single representative location to calibrate the empirical infiltration equation used by the surface-flow model. In comparison with models that iterate at each time step, the proposed coupling strategy reduces the computational effort and improves convergence. The approach provides a practical alternative for coupling existing and future surface and subsurface flow models.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alazmi, B., and Vafai, K. (2001). “Analysis of fluid flow and heat transfer interfacial conditions between a porous medium and a fluid layer.” Int. J. Heat Mass Transfer, 44, 1735–1749.
Bautista, E., Clemmens, A. J., Strelkoff, T. S., and Schlegel, J. L. (2009). “Modern analysis of surface irrigation systems with WINSRFR.” Agric. Water Manage., 96, 1146–1154.
Furman, A. (2008). “Modeling coupled surface–subsurface flow processes: A review.” Vadose Zone J., 7, 741–756.
Furman, A., Warrick, A. W., Zerihun, D., and Sanchez, C. A. (2006). “Modified Kostiakov infiltration function: accounting for initial and boundary conditions.” J. Irrig. Drain. Eng., 132(6), 587–596.
McBratney, A. B., Minasny, B., Cattle, S. R., and Vervoort, R. W. (2002). “From pedotransfer functions to soil inference systems.” Geoderma, 109, 41–73.
Morita, M., and Yen, B. C. (2002). “Modeling of conjunctive two-dimensional surface three-dimensional subsurface flows.” J. Hydraul. Eng., 128(2), 184–200.
Panday, S., and Huyakorn, P. S. (2004). “A fully coupled physically-based spatially distributed model for evaluating surface/subsurface flow.” Adv. Water Resour., 27, 361–382.
Parlange, J. Y., Haverkamp, R., and Touma, J. (1985). “Infiltration under ponded conditions. i. optimal analytical solution and comparison with experimental observations.” Soil Sci., 139, 305–311.
Richards, L. A. (1931). “Capillary conduction of liquids through porous mediums.” Physics, 1(5), 318–333.
Saxton, K. E., and Rawls, W. J. (2006). “Soil water characteristic estimates by texture and organic matter for hydrologic solutions.” Soil Sci. Soc. Am. J., 70, 1569–1578.
Schaap, M. G., Leij, F. J., and van Genuchten, M. Th. (2001). “Rosetta: computer program for estimating soil hydraulic parameters with hierarchical pedotransfer functions.” J. Hydrol. (Amst.), 251, 163–176.
Schmitz, G., Haverkamp, R., and Palacios Velez, O. (1985). “a coupled surface-subsurface model or shallow water flow over initially dry-soil.” Proc. 21st Congress. Intl. Assoc. Hydr. Res. (IAHR), 1, 23–30.
Schmitz, G. H., and Seus, G. J. (1992). “Mathematical zero-inertia modeling of surface irrigation: Advance in furrows.” J. Irrig. Drain. Eng., 118(1), 1–18.
Šimůnek, J., Šejna, M., Saito, H., Sakai, M., and van Genuchten, M. Th. (2008). “The HYDRUS-1D software package for simulating the movement of water, heat, and multiple solutes in variably saturated media, Version 4.0.” HYDRUS Software Series 3, Department of Environmental Sciences, Univ. of California Riverside, Riverside, Calif., 315.
Šimůnek, J., Šejna, M., and van Genuchten, M. T. (1998). The HYDRUS-1D software package for simulating the movement of water, heat, and multiple solutes in variably saturated media, version 2.0, U.S. Salinity Laboratory, SDA-ARS, Riverside, Calif.
Šimůnek, J., Šejna, M., and van Genuchten, M. Th. (1999). “The HYDRUS-2D software package for simulating the two-dimensional movement of water, heat, and multiple solutes in variably-saturated media.” IGWMC-TPS 53, Version 2.0, International Ground Water Modeling Center, Colorado School of Mines, Golden, Colo.
Singh, V., and Bhallamudi, S. M. (1996). “Complete hydrodynamic border-strip irrigation model.” J. Irrig. Drain. Eng., 122(4), 189–197.
Strelkoff, T., and Katopodes, N. (1977). “End depth under zero-inertia conditions.” J. Hyd. Div. ASCE, 103(7), 699–711.
Tabuada, M. A., Rego, Z. J. C., Vachaud, G., and Pereira, L. S. (1995a). “Modeling of furrow irrigation. advance with two-dimensional infiltration.” Agric. Water Manage., 28, 201–221.
Tabuada, M. A., Rego, Z. J. C., Vachaud, G., and Pereira, L. S. (1995b). “Two-dimensional infiltration under furrow irrigation: Modelling, its validation and applications.” Agric. Water Manage., 27(2), 105–123.
Tabuada, M. A., Rego, Z. J. C., Vachaud, G., and Pereira, L. S. (1996). “Erratum: Two-dimensional infiltration under furrow irrigation: modelling, its validation and applications.” Agric. Water Manage., 30(1), 119–120.
van Alphen, B. J., Booltink, H. W. G., and Bouma, J. (2001). “Combining pedotransfer functions with physical measurements to improve the estimation of soil hydraulic properties.” Geoderma, 103, 133–147.
VanderKwaak, J. E. (1999). “Numerical simulation of flow and chemical transport in integrated surface–subsurface hydrologic system.” Ph.D. thesis, Univ. of Waterloo, Waterloo, Ontario, Canada.
van Genuchten, M. Th. (1980). “Closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J., 44(5), 892–898.
Walker, W. R. (2003). SIRMOD III—Surface irrigation simulation, evaluation and design: User’s guide and technical documentation, Dept. of Biological and Irrigation Engineering, Utah State Univ., Logan, Utah.
Wöhling, Th., Frohner, A., Schmitz, G. H., and Liedl, A. (2006). “Physically based modeling of interacting surface-subsurface flow during furrow irrigation advance.” J. Irrig. Drain. Eng., 132(4), 380–388.
Wöhling, Th., and Schmitz, G. H. (2007). “Physically based coupled model for simulating 1D surface-2D subsurface flow and plant water uptake in irrigation furrows. I: Model development.” J. Irrig. Drain. Eng., 133(6), 538–547.
Wöhling, Th., Singh, R., and Schmitz, G. H. (2004). “Physically based modeling of interacting surface-subsurface flow during furrow irrigation advance.” J. Irrig. Drain. Eng., 130(5), 349–356.
Zerihun, D., Furman, A., Warrick, A. W., and Sanchez, C. A. (2005). “Coupled surface-subsurface flow model for improved basin irrigation management.” J. Irrig. Drain. Eng., 131(2), 111–128.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Nov 25, 2009
Accepted: Apr 5, 2010
Published online: Apr 9, 2010
Published in print: Oct 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.