Influence of Tailwater Depth and Pile Position on Scour Downstream of Block Ramps
Publication: Journal of Irrigation and Drainage Engineering
Volume 136, Issue 2
Abstract
Scour control downstream of hydraulic structures is an important topic in hydraulic engineering. Block ramps or rock chutes are often used to control scour downstream of hydraulic structures and have the peculiarity to be ecofriendly. Although these structures assure great energy dissipation, the rapid passage from supercritical to subcritical flow at the toe results in a scour hole with geometric parameters that have to be evaluated in order to avoid foundation problems. For this reason, the analysis of the scour process and the comprehension of the hydrodynamic mechanisms on which it is based are extremely important. In this paper, the results of systematic experimental tests are shown that analyze both the influence of the stilling basin tailwater depth and the ramp toe stabilizing structures, for both uniform and nonuniform channel bed materials. In fact, block ramps are generally stabilized by inserting piles or micropiles at the toe. The upper edge level of piles or micropiles was found a relevant parameter for the scour hole geometry. Simple novel relationships that account for tailwater depth, pile position, and bed material gradation are developed to evaluate the main lengths of the scour hole, in the case in which a free hydraulic jump in a mobile bed occurs. These simple relationships give engineers helpful instruments in block ramp design.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aderibigbe, O., and Rajaratnam, N. (1998). “Effect of sediment gradation on erosion by plane turbulent wall jets.” J. Hydraul. Res., 124(10), 1034–1042.
Bormann, E., and Julien, P. Y. (1991). “Scour downstream of grade control structures.” J. Hydraul. Eng., 117(5), 579–594.
Breusers, H. N. C. (1966). “Conformity and time scale in two-dimensional local scour.” Proc., Symp. Model and Prototype Conformity, Hydraulic Research Laboratory, Poona, India, 1–8.
Breusers, H. N. C., and Raudkivi, A. J. (1991). Scouring, IAHR Hydraulic structures design manual, Balkema, Rotterdam, The Netherlands.
D’Agostino, V., and Ferro, V. (2004). “Scour on alluvial bed downstream of grade-control structures.” J. Hydraul. Eng., 130(1), 24–37.
Dey, S., and Raikar, V. (2005). “Scour in long contractions.” J. Hydraul. Eng., 131(12), 1036–1049.
Hoffmans, G. J. C. M. (1998). “Jet scour in equilibrium phase.” J. Hydraul. Eng., 124(4), 430–437.
Hoffmans, G. J. C. M., and Verheij, H. J. (1997). Scour manual, Balkema, Rotterdam, The Netherlands.
Mason, P. J., and Arumugam, K. (1985). “Free jet scour below dams and flip buckets.” J. Hydraul. Eng., 111(2), 220–235.
Mih, W. C., and Kabir, J. (1983). “Impingement of water jets on nonuniform streambeds.” J. Hydraul. Eng., 109(4), 536–548.
Nik Hassan, N. M. K., and Narayanan, R. (1985). “Local scour downstream of an apron.” J. Hydraul. Eng., 111(11), 1371–1385.
Pagliara, S. (2007). “Influence of sediment gradation on scour downstream of block ramps.” J. Hydraul. Eng., 133(11), 1241–1248.
Pagliara, S., and Chavaccini, P. (2006). “Flow resistance of rock chutes with protruding boulders.” J. Hydraul. Eng., 132(6), 545–552.
Pagliara, S., and Hager, W. H. (2004). “Scour downstream of block ramps.” Proc., 2nd Int. Conf. Scour and Erosion, Vol. 2, Stallion Press, Singapore, 215–222.
Pagliara, S., and Palermo, M. (2008a). “Scour control downstream of block ramps.” J. Hydraul. Eng., 134(9), 1376–1382.
Pagliara, S., and Palermo, M. (2008b). “Scour control and surface sediment distribution downstream of block ramps.” J. Hydraul. Res., 46(3), 334–343.
Rajaratnam, N. (1981). “Erosion by plane turbolent jets.” J. Hydraul. Res., 19(4), 339–358.
Rajaratnam, N., and Macdougall, R. K. (1983). “Erosion by plane wall jets with minimum tailwater.” J. Hydraul. Eng., 109(7), 1061–1064.
Schoklitsch, A. (1932). “Kolkbildung unter uberfallstrahlen.” Die Waserwirtschaft, 24, 341–343.
Veronese, A. (1937). “Erosioni di fondo a valle di uno scarico.” Ann. Lavori Pubbl, 75(9), 717–726 (in Italian).
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jul 10, 2008
Accepted: Jun 29, 2009
Published online: Jul 3, 2009
Published in print: Feb 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.