Optimal Rotational Speed of Kaplan and Francis Turbines with Focus on Low-Head Hydropower Applications and Dataset Collection
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Hydraulic Engineering
Volume 145, Issue 12
Abstract
The rotational speed estimation of Francis and Kaplan turbines is of primary importance in the design of hydropower plants. However, most rotational speed equations were conceived for power outputs higher than 1 MW, i.e., for heads typically higher than 10 m for Kaplan turbines and 50 m for Francis turbines. Therefore, the accuracy of these equations is low when applied to reaction turbines with power outputs below 1 MW (mini-hydropower), which means the personal know-how of hydropower companies is generally used to select rotational speed. In light of this, a database composed of hundreds of full-scale Francis and Kaplan miniturbines was collected. Full-scale data were used in combination with the Buckingham -theorem to determine a nondimensional equation for the rotational speed estimation of collected turbines. Flow rate and head were used as input variables. The dimensional analysis was also extended to high-head Kaplan and Francis turbines. A universal equation valid for both Francis and Kaplan turbines was obtained. Finally, the dimensionless terms obtained from the analysis were proposed as characteristic numbers for the selection of the hydraulic turbine type. The new equations were proposed as engineering tools for the design of hydroturbines.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The author would like to explicitly thank the following hydropower companies (HCs) and irrigation consortia (IC) for their direct contribution to data collection and personal communications: Est-Sesia (IC), Zeco Hydropower (HC), Orengine (HC), 45Engineering (HC), and Ghiggia Ingegneria d’Impianti (HC) (not all the realized turbines of these HCs were included in this paper). Thanks also to Koessler (HC) for its database.
References
Austegard, A., and O. Schumacher. 2011. “Kaplan turbine from remote hydroLight.” Accessed October 15, 2018. http://www.remotehydrolight.com.
Avellan, F. 2004. “Introduction to cavitation in hydraulic machinery.” In Proc., 6th Int. Conf. on Hydraulic Machinery and Hydrodynamics. Timisoara, Romania: Politehnica Univ. of Timişoara.
Baggio, D. 2015. “Micro Kaplan turbine preliminary design.” Master’s thesis, Dept. of Ingegneria Energetica, Università degli Studi di Padova.
Bodis, K., F. Monforti, and S. Szabo. 2014. “Could Europe have more mini hydro sites? A suitability analysis based on continentally harmonized geographical and hydrological data.” Renewable Sustainable Energy Rev. 37: 794–808.
Bozhinova, S., D. Isliakov, G. Müller, V. Hecht, and S. Schneider. 2013. “Hydropower converters with head differences below 2.5 m.” Proc. Inst. Civ. Eng. Energy 166 (3): 107–119. https://doi.org/10.1680/ener.11.00037.
Brekke, H. 2001. Hydraulic turbines design, erection and operation. Trondheim, Norwey: Norwegian Univ. of Science and Technology.
de Siervo, F., and F. de Lava. 1976. “Modern trends in selecting and designing Francis turbines.” Water Power Dam Constr. 28 (8): 28–35.
de Siervo, F., and F. de Lava. 1977. “Modern trends in selecting and designing Kaplan turbines.” Water Power Dam Constr. 32 (12): 40–48.
de Siervo, F., and A. Lugaresi. 1978. “Modern trends in selecting and designing Pelton turbines.” Water Power Dam Constr. 30 (12): 40–48.
ESHA (European Small Hydropower Association). 2014. Small and micro hydropower restoration handbook. Athens, Greece: National Technical Univ. of Athens.
European Commission. 2009a. “RES Directive 2009/28/EC of the European Parliament and on the Council of 23 April 2009 on the promotion of the use of energy from renewable.” Off. J. Eur. Union. 52 (L140): 0016–0062.
European Commission. 2009b. “Directive 2009/29/EC of the European Parliament and of the Council of 23 April 2009 amending Directive 2003/87/EC so as to improve and extend the greenhouse gas emission allowance trading scheme of the Community.” Off. J. Eur. Union. 52 (L 140): 0063–0087. https://doi.org/10.3000/17252555.L_2009.140.eng.
Heckelsmueller, G. P. 2015. “Application of variable speed operation on Francis turbines.” Ingeniería e Investigación 35 (1): 12–16. https://doi.org/10.15446/ing.investig.v35n1.44995.
Kecel, S., H. G. Yavuzkan, and A. Sozen. 2017. “Examination of flow effects in Francis turbine models with different numbers of rotor blades.” J. Polytech. 20 (1): 241–249. https://doi.org/10.2339/2017.20.1, 241-249.
Kougias, I., et al. 2019. “Analysis of emerging technologies in the hydropower sector.” Renewable Sustainable Energy Rev. 113: 109257. https://doi.org/10.1016/j.rser.2019.109257.
Laghari, J., H. Mokhlis, A. H. A. Bakar, and H. Mohammad. 2013. “A comprehensive overview of new designs in the hydraulic, electrical equipments and controllers of mini hydro power plants making it cost effective technology.” Renewable Sustainable Energy Rev. 20: 279–293. https://doi.org/10.1016/j.rser.2012.12.002..
Lubitz, D., M. Lyons, and S. Simmons. 2014. “Performance model of archimedes screw hydro turbines with variable fill level.” J. Hydraul. Eng. 140 (10): 04014050. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000922.
Lugaresi, A., and A. Massa. 1987. “Designing Francis turbines: trends in the last decade.” Water Power Dam Constr. 39 (11): 23–32.
Mecamidi. 2018 “Reference_hydraulic_power_plants.” Accessed November 1, 2018. http://www.mecamidi.com/.
Nuernbergk, D., and C. Rorres. 2013. “Analytical model for water inflow of an Archimedes screw used in hydropower generation.” J. Hydraul. Eng. 139 (2): 213–220. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000661.
Quaranta, E. 2018. “Stream water wheels as renewable energy supply in flowing water: Theoretical considerations, performance assessment and design recommendation.” Energy Sustainable Dev. 45 (Aug): 96–109. https://doi.org/10.1016/j.esd.2018.05.002.
Quaranta, E., and G. Müller. 2018. “Sagebien and Zuppinger water wheels for very low head hydropower applications.” Hydraul. Res. 56 (4): 526–536. https://doi.org/10.1080/00221686.2017.1397556.
Quaranta, E., and R. Revelli. 2015. “Output power and power losses estimation for an overshot water wheel.” Renewable Energy 83 (1): 979–987. https://doi.org/10.1016/j.renene.2015.05.018.
Quaranta, E., and R. Revelli. 2017. “Hydraulic behavior and performance of breastshot water wheels for different numbers of blades.” J. Hydraul. Eng. 143 (1): 04016072. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001229.
Quaranta, E., and R. Revelli. 2018. “Gravity water wheels as a micro hydropower energy source: A review based on historic data, design methods, efficiencies and modern optimizations.” Renewable Sustainable Energy Rev. 97 (Dec): 414–427. https://doi.org/10.1016/j.rser.2018.08.033.
Resiga, R., S. Muntean, V. Hasmatuchi, I. Anton, and F. Avellan. 2010. “Analysis and prevention of vortex breakdown in the simplified discharge cone of a Francis turbine.” J. Fluids Eng. 132 (5): 051102. https://doi.org/10.1115/1.4001486.
Schweiger, F., and J. Gregori. 1987. “Development in the design of Kaplan turbines.” Water Power Dam Constr. (Nov): 16–20.
Trivedi, C., and M. Cervantes. 2017. “Fluid-structure interactions in Francis turbines: A perspective review.” Renewable and Sustainable Energy Rev. 68: 87–101.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Nov 9, 2018
Accepted: Apr 10, 2019
Published online: Oct 14, 2019
Published in print: Dec 1, 2019
Discussion open until: Mar 14, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.