Effect of Shallowness on Sediment Deposition in Recirculation Zones
Publication: Journal of Hydraulic Engineering
Volume 137, Issue 9
Abstract
Various hydrodynamic and sediment deposition experiments were conducted on a purpose-built, wide, shallow water table using a range of incoming flow and bed roughness conditions, including five flow rates, different inflow sediment concentrations, and different artificial roughness coefficients generated by four transverse string intervals. A recirculation zone was created behind a 0.5-m-wide backward-facing step on the left side of the table. Surface velocities, sediment concentrations, and processes and features of sediment deposition in recirculation zones were measured. Experimental results indicate that (1) as the value of the shallow stability parameter increased from 0.033 to 0.47, the length of the recirculation zone decreased to less than half, but the corresponding area and volume of sediment deposition increased about four times, and (2) it is the strength of the mixing layer rather than the size of the recirculation zone that dominates the process of sediment deposition as well as the final deposition feature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers thank the National Natural Science Foundation of China (NSFC), Science Fund for Distinguished Young Scholars program, for support of this study and support for Daoyi Chen in collaboration with Guangqian Wang at Tsinghua University (Grant No. NNSFC50428906). The writers also thank the reviewers very much for their constructive comments that improved the paper.
References
Chen, D., and Jirka, G. H. (1995). “Experimental study of plane turbulent wake in a shallow water layer.” Fluid Dyn. Res., 16(1), 11–15.
Chen, D., and Jirka, G. H. (1997). “Absolute and convective instabilities of plane turbulent wakes in a shallow water layer.” J. Fluid Mech., 338(1), 157–158.
Chen, D., and Jirka, G. H. (1998). “Instability characteristics of mixing layer and jet under the joint effects of bottom friction and viscosity.” J. Hydraul. Res., 36(1), 815–814.
Chu, V. H., and Babarutsi, S. (1988). “Confinement and bed-friction effects in shallow turbulent mixing layers.” J. Hydraul. Eng., 114(10), 1257–1274.
Chu, V. H., Fang, L., and Altai, W. (2004). “Friction and confinement effects on a shallow recirculating flow.” J. Environ. Eng. Sci., 3(5), 463–475.
Chu, V. H., Wu, J. H., and Khayat, R. E. (1991). “Stability of transverse shear flows in shallow open channels.” J. Hydraul. Eng., 117(10), 1370–1371.
Ghidaoui, M. S., and Liang, J. H. (2008). “Investigation of shallow mixing layers by BGK finite volume model.” Int. J. Comput, Fluid Dyn., 22(7), 523–537.
Knight, D. W., and Macdonald, J. A. (1979). “Hydraulic resistance of artificial strip roughness.” J. Hydraul. Eng., 105(HY6), 675–690.
Lloyd, P. M., Stansby, P. K., and Chen, D. (2001). “Wake formation around islands in oscillatory laminar shallow-water flows.” J. Fluid Mech., 429, 217–238.
Rockwell, D. (2008). “Vortex formation in shallow flows.” Phys. Fluids, 20(3), 031303–031310.
Tihon, J., Legrand, J., and Legentilhomme, P. (2001). “Near-wall investigation of backward-facing step flows.” Exp. Fluids, 31(5), 484–493.
Uijttewaal, W. S. J., and Booij, R. (2000). “Effects of shallowness on the development of free-surface mixing layers.” Phys. Fluids, 12(2), 392–402.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Apr 23, 2010
Accepted: Dec 2, 2010
Published online: Dec 6, 2010
Published in print: Sep 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.