Effective Green-Ampt Parameters for Two-Layered Soils
Publication: Journal of Hydrologic Engineering
Volume 25, Issue 4
Abstract
The Green-Ampt method is a physically based model for partitioning rainfall into surface runoff and infiltration. This method is widely used in infiltration practice because of its simplicity and the ease of obtaining the required hydraulic soil properties. The method assumes that the soil is homogeneous. This, however, limits its application to layered soils. In this paper, a simple procedure for applying the Green-Ampt method to two-layered soils was examined under both steady and unsteady rain. For a given design storm, the maximum saturated depth of the top layer was estimated and was used to identify whether the soil profile behaved as a single-layered or two-layered profile. For a two-layered soil profile, the overall effective Green-Ampt parameters were then estimated considering different parameters such as rainfall characteristics, the hydraulic properties of both layers, the thickness of the top layer, and the maximum saturated depth. The cumulative infiltrated volumes with effective Green-Ampt parameters were compared with MIKE SHE simulation results based on the Richards equation with two-layered soils for different layer thicknesses and rainfall hyetographs. The results showed that the proposed simple procedure for estimating the effective soil parameters using the Green-Ampt method showed a good agreement with that computed using the Richards equation in terms of the volume of infiltration water. This approach is expected to provide researchers and engineers a more practical tool in estimating infiltration in two-layered soils than what is presently available.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request (computational models).
Acknowledgments
The authors acknowledge funding support from the Institute for Sustainability, Energy, and Environment (iSEE) at the University of Illinois at Urbana-Champaign. The authors also acknowledge Danish Hydraulic Institute (DHI) for providing the educational licenses of MIKE SHE.
References
Abbott, M. B., J. C. Bathurst, J. A. Cunge, P. E. O’Connell, and J. Rasmussen. 1986a. “An introduction to the European hydrological system—Systeme hydrologique European, ‘SHE’, 1: History and philosophy of a physically-based, distributed modeling system.” J. Hydrol. 87 (1–2): 45–59. https://doi.org/10.1016/0022-1694(86)90114-9.
Abbott, M. B., J. C. Bathurst, J. A. Cunge, P. E. O’Connell, and J. Rasmussen. 1986b. “An introduction to the European hydrological system—Systeme hydrologique Europeen, ‘SHE’, 2: Structure of a physically based distributed modelling system.” J. Hydrol. 87 (1–2): 61–77. https://doi.org/10.1016/0022-1694(86)90115-0.
Bouwer, H. 1969. “Infiltration of water into nonuniform soil.” J. Irrig. Drain. Div. 95 (4): 451–462.
Carsel, R. F., and R. S. Parrish. 1988. “Developing joint probability distributions of soil water retention characteristics.” Water Resour. Res. 24 (5): 755–769. https://doi.org/10.1029/WR024i005p00755.
Chow, V. T. 1964. Handbook of applied hydrology. New York: Mc-Graw Hill.
Deliman, P. N. 1994. “Green-Ampt infiltration in layered soils with positive soil water potential.” Ph.D. thesis, Agricultural Engineering, Texas A&M Univ.
DHI (Danish Hydraulic Institute). 2007a. MIKE SHE user manual, volume 1: User guide. Hørsholm, Denmark: DHI.
DHI (Danish Hydraulic Institute). 2007b. MIKE SHE user manual, volume 2: Reference guide. Hørsholm, Denmark: DHI.
Flerchinger, G. N., F. J. Watts, and G. L. Bloomsburg. 1988. “Explicit solution to Green-Ampt equation for nonuniform soils.” J. Irrig. Drain. Eng. 114 (3): 561–565. https://doi.org/10.1061/(ASCE)0733-9437(1988)114:3(561).
Fok, Y.-S. 1970. “One-dimensional infiltration into layered soils.” J. Irrig. Drain. Div. 96 (2): 121–129.
Green, W. H., and G. A. Ampt. 1911. “Studies in soil physics: 1. Flow of air and water through soils.” J. Agric. Sci. 4 (1): 1–24. https://doi.org/10.1017/S0021859600001441.
Hill, D. W. 1992. “Occurrence of positive soil water potentials during infiltration in layered soils.” M.S. thesis, Agricultural Engineering, Texas A&M Univ.
Horton, R. E. 1933. “The role of infiltration in the hydrologic cycle.” Eos Trans. Am. Geophys. Union 14 (1): 446–460. https://doi.org/10.1029/TR014i001p00446.
Le, P. V. V., P. Kumar, A. J. Valocchi, and H.-V. Dang. 2015. “GPU-based high-performance computing for integrated surface–sub-surface flow modeling.” Environ. Modell. Software 73 (Nov): 1–13. https://doi.org/10.1016/j.envsoft.2015.07.015.
Leconte, R., and F. P. Brissette. 2001. “Soil moisture profile model for two-layered soil based on sharp wetting front approach.” J. Hydrol. Eng. 6 (2): 141–149. https://doi.org/10.1061/(ASCE)1084-0699(2001)6:2(141).
Liu, J., J. Zhang, and J. Feng. 2008. “Green-Ampt model for layered soils with nonuniform initial water content under unsteady infiltration.” Soil Sci. Soc. Am. J. 72 (4): 1041–1047. https://doi.org/10.2136/sssaj2007.0119.
Ma, Y., S. Feng, D. Su, G. Gao, and Z. Huo. 2010. “Modeling water infiltration in a large layered soil column with a modified Green-Ampt model and HYDRUS-1D.” Supplement, Comput. Electron. Agric. 71 (S1): S40–S47. https://doi.org/10.1016/j.compag.2009.07.006.
Mailapalli, D. R., W. W. Wallender, R. Singh, and N. S. Raghuwanshi. 2009. “Application of a nonstandard explicit integration to solve Green and Ampt infiltration equation.” J. Hydrol. Eng. 14 (2): 203–206. https://doi.org/10.1061/(ASCE)1084-0699(2009)14:2(203).
Mein, R. G., and C. L. Larson. 1973. “Modeling infiltration during a steady rain.” Water Resour. Res. 9 (2): 384–394. https://doi.org/10.1029/WR009i002p00384.
Moore, I. D., and J. D. Eigel. 1981. “Infiltration into two-layered soil profiles.” Trans. ASAE 24 (6): 1496–1503. https://doi.org/10.13031/2013.34480.
Ramos, H. 2007. “A non-standard explicit integration scheme for initial-value problems.” Appl. Math. Comput. 189 (1): 710–718. https://doi.org/10.1016/j.amc.2006.11.134.
Richards, L. A. 1931. “Capillary conduction of liquid through porous medium.” J. Appl. Phys. 1 (5): 318–333. https://doi.org/10.1063/1.1745010.
Saxton, K. E., and W. J. Rawls. 2006. “Soil water characteristic estimates by texture and organic matter for hydrologic solutions.” Soil Sci. Soc. Am. 70 (5): 1569–1578. https://doi.org/10.2136/sssaj2005.0117.
van Genuchten, M. T. 1980. “A close-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J. 44 (5): 892–898. https://doi.org/10.2136/sssaj1980.03615995004400050002x.
Wenzel, H. G. 2013. “Rainfall for urban stormwater design.” In Urban stormwater hydrology, edited by D. F. Kibler. Washington, DC: American Geophysical Union. https://doi.org/10.1029/WM007p0035.
Yen, B. C., and V. T. Chow. 1980. “Design hyetographs for small drainage structures.” J. Hydraul. Eng. 106 (6): 1055–1076.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jun 21, 2019
Accepted: Oct 14, 2019
Published online: Jan 30, 2020
Published in print: Apr 1, 2020
Discussion open until: Jun 30, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.