Rating Curves for Dam-Break Flows
Publication: Journal of Hydrologic Engineering
Volume 15, Issue 1
Abstract
The area of a looped rating curve for a channel cross section is indicative of the dynamic effects of a flood wave. These effects may be used as a criterion to decide the suitability of a simplifying approximation, such as dynamic, kinematic or diffusive wave modeling, for the analysis of dam-break flow. Two approximate models to calculate the area of the nondimensional loop for dam-break flow are developed herein based on the computed results for several hypothetical dam failure cases. A comparison of the results obtained from the approximate models and those by simulations shows that approximate models can be used to predict the nondimensional loop area for short distances from the dam. As expected, the area of the nondimensional loop decreases as the flood wave moves downstream, it increases as the breach width increases and it decreases for increased breach time and/or flood-plain width.
Get full access to this article
View all available purchase options and get full access to this article.
References
Almeida, A. B., and Franco, A. B. (1994). “Modeling of dam-break flows.” Computer modeling of free-surface and pressurized flows, Chap. 12, M. H. Chaudhry and L. W. Mays, eds., NATO Science Series E, Vol. 247, Springer, New York, 343–373.
Chaudhry, M. H. (1993). Open channel flow, Prentice-Hall, Englewood Cliffs, N.J.
Dressler, R. F. (1954). “Comparison of theories and experiments for hydraulic dam-break wave.” Int. Assoc. Sci. Pubs., 3(38), 319–328.
Fennema, R. J., and Chaudhry, M. H. (1987). “Explicit methods for 2-D transient free surface flows.” J. Hydraul. Res., 25(1), 41–51.
Fread, D. L. (1983). “Applicability of criteria for kinematic and diffusion routing models,” 19th American Water Resource Conf., American Water Resource Association, San Antonio, Tex.
Fread, D. L. (1989). NWS DAMBRK documentation, Office of Hydrology, National Weather Service (NWS), Silver Spring, Md.
French, R. H. (1985). Open channel hydraulics, McGraw-Hill, New York.
Hervouet, J. M. (1996). “Introduction to the TELEMAC system.” Rep. No. HE-43/96/073/A, EDF, France.
Hunt, B. (1983). “Asymptotic Solution for dam-break problem.” J. Hydr. Div., 109(12), 1698–1706.
Mishra, S. K., and Seth, S. M. (1996). “Use of hysteresis for defining the nature of flood wave propagation in natural channels.” Hydrol. Sci. J., 41(2), 153–170.
Ponce, V. M. (1989). Engineering hydrology: Principles and practices, Prentice-Hall, Englewood Cliffs, N.J.
Singh, V. P. (1996). Dam breach modeling technology, Kluwer Academic, Boston.
Stoker, J. J. (1957). Water waves, Interscience, New York, 331–341.
USACE Waterways Experiment Station. (1960). “Floods resulting from suddenly breached dams: Conditions of minimum resistance.” Report, Miscellaneous Paper No. 2–374, U.S. Army Corps of Engineers, Vicksburg, Miss.
Vieira, J. H. D. (1983). “Conditions governing the use of approximations for the St. Venant equations for shallow water.” J. Hydrol., 60, 43–58.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jan 26, 2007
Accepted: May 6, 2009
Published online: May 8, 2009
Published in print: Jan 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.