Enhancing the Axial Compression Response of Pervious Concrete Ground Improvement Piles Using Biogrouting
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 142, Issue 10
Abstract
This paper presents an innovative grouted ground improvement pile alternative (biogrouted pervious concrete pile). Biogrouting is a potential ground improvement technique that utilizes soil bacteria to induce calcium carbonate () precipitation to cement soil particles. The most commonly investigated biogrouting method is microbial-induced carbonate precipitation (MICP). Previous large-scale applications of MICP have encountered practical difficulties including bioclogging, which results in a limited zone of cemented soil around injection points and heterogeneous distribution of . The research presented in this paper focuses on evaluating the feasibility of MICP biogrouting of a limited soil zone surrounding permeable piles to improve their responses when subjected to axial compression loading. To investigate this, two instrumented pervious concrete piles with diameters of 76 mm and lengths of 1.07 m with and without MICP biogrouting were subjected to compression loading at the Soil-Structure Interaction (SSI) facility at Lehigh University, Bethlehem, Pennsylvania. The pervious concrete pile serves as an injection point during the MICP biogrouting. The mechanical responses of the pile and surrounding soil were analyzed, along with shear wave (S-wave) velocity, moisture content, and and ammonium contents of the surrounding soil. The results presented in this paper demonstrated that the limited MICP-improved zone around pervious concrete piles improved the load-displacement response, load transfer, and pile capacity under compression loading.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the support of the Civil, Mechanical, and Manufacturing Innovation (CMMI) Division at National Science Foundation (No. 1233566). The research team would like to acknowledge the efforts of several graduate students, including Mathu Davis, Suguang Xiao, and Lusu Ni. Also, the authors would like to acknowledge the help of Edward Tomlinson, and Darrick Fritchman, technician, and instrumentation and system specialist at Lehigh University’s Advanced Technology for Large Structural Systems (ATLSS) Engineering Research Center.
References
Al Qabany, A., Mortensen, B., Martinez, B., Soga, K., and DeJong, J. (2011). “Microbial carbonate precipitation: Correlation of S-wave velocity with calcite precipitation.” Proc., ASCE Geo-Frontiers 2011 Conf., ASCE, Reston, VA.
Al Qabany, A., and Soga, K. (2013). “Effect of chemical treatment used in MICP on engineering properties of cemented soils.” Géotechnique, 63(4), 331–339.
Al Qabany, A., Soga, K., and Santamarina, C. (2012). “Factors affecting efficiency of microbially induced calcite precipitation.” J. Geotech. Geoenviron. Eng., 992–1001.
APHA, AWWA, and WEF (American Public Health Association, American Water Works Association, and Water Environment Federation). (1992). “Standard methods for the examination of water and wastewater.” Washington, DC.
ASTM. (2009a). “Standard test method for compressive strength of cylindrical concrete specimens.” ASTM C39, West Conshohocken, PA.
ASTM. (2009b). “Standard test method for deep foundations under static axial compressive load.” ASTM D1143, West Conshohocken, PA.
ASTM. (2009c). “Standard test method for density and void content of freshly mixed pervious concrete.” ASTM C1688, West Conshohocken, PA.
ASTM. (2009d). “Standard test method for infiltration rate of in place pervious concrete.” ASTM C1701, West Conshohocken, PA.
ASTM. (2009e). “Standard test method for splitting tensile strength of cylindrical concrete specimens.” ASTM C496, West Conshohocken, PA.
Basu, P., Loukidis, D., Prezzi, M., and Salgado, R. (2011). “Analysis of shaft resistance of jacked piles in sands.” Int. J. Numer. Anal. Meth. Geomech., 35(15), 1605–1635.
Bruce, D. A. (1986a). “Enhancing the performance of large diameter piles by grouting: Part 1.” Ground Eng., 19(4), 9–15.
Bruce, D. A. (1986b). “Enhancing the performance of large diameter piles by grouting: Part 2.” Ground Eng., 19(5), 11–18.
Burbank, M., Weaver, T., Lewis, R., Williams, T., Williams, B., and Crawford, R. (2013). “Geotechnical tests of sands following bioinduced calcite precipitation catalyzed by indigenous bacteria.” J. Geotech. Geoenviron. Eng., 928–936.
Cheng, L., and Cord-Ruwisch, R. (2013). “Upscaling effects of soil improvement by microbially induced calcite precipitation by surface percolation.” Geomicrobiol. J., 31(5), 396–406.
Chou, C., Seagren, E. A., Aydilek, A. H., and Lai, M. (2011). “Biocalcification of sand through ureolysis.” J. Geotech. Geoenviron. Eng., 1179–1189.
Dejong, J. T., et al. (2013). “Biogeochemical processes and geotechnical applications: Progress, opportunities and challenges.” Géotechnique, 63(4), 287–301.
DeJong, J., Fritzges, M., and Nüsslein, K. (2006). “Microbially induced cementation to control sand response to undrained shear.” J. Geotech. Geoenviron. Eng., 1381–1392.
Fattahpour, V., Baudet, B. A., and Sze, J. W. (2015). “Laboratory investigation of shaft grouting.” Proc. ICE-Geotech. Eng., 168(1), 65–74.
Fu, L., Zeng, X., and Figueroa, J. L. (2004). “Shear wave velocity measurement in centrifuge using bender elements.” Int. J. Phys. Modell. Geotech., 4(2), 1–11.
Gouvenot, D., and Gabiax, F. D. (1975). “A new foundation technique using piles sealed by concrete under high pressure.” Proc., 7th Annual Offshore Technology Conf., American Institute of Mining, Metallurgical, and Petroleum Engineers, Houston, 641–656.
Hamdan, N., Kavazanjian, E., Jr., Rittmann, B. E., and Karatas, I. (2011). “Carbonate mineral precipitation for soil improvement through microbial denitrification.” Proc., GeoFrontiers 2011: Advances in Geotechnical Engineering, ASCE, Reston, VA, 3925–3934.
Ivanov, V., and Chu, J. (2008). “Applications of microorganisms to geotechnical engineering for bioclogging and biocementation of soil in situ.” Rev. Environ. Sci. BioTechnol., 7(2), 139–153.
Janbu, N. (1963). “Soil compressibility as determined by oedometer and triaxial tests.” Proc., European Conf. on Soil Mechanics and Foundation Engineering, Wiesbaden, Germany, 19–25.
Joer, H. A., Randolph, M. F., and Gunasena, U. (1998). “Experimental modeling of the shaft capacity of grouted driven piles.” Geotech. Test. J., 21(3), 159–168.
Lee, J., and Santamarina, J. C. (2005). “Bender elements: Performance and signal interpretation.” J. Geotech. Geoenviron. Eng., 1063–1070.
Lin, H., Ni, L., Suleiman, M. T., and Raich, A. (2014). “Interaction between laterally loaded pile and surrounding soil.” J. Geotech. Geoenviron. Eng., 04014119.
Lin, H., Suleiman, M. T., Brown, D. G., and Kavazanjian, E. (2016). “Mechanical behavior of sands treated by microbially induced carbonate precipitation (MICP).” J. Geotech. Geoenviron. Eng., 04015066.
Liu, H., Kong, G., Chu, J., Ding, X. (2015). “Grouted gravel column supported highway embankment over soft clay: Case study.” Can. Geotech. J., 10.52(11), 1725–1733.
Martinez, B. C., et al. (2013). “Experimental optimization of microbial-induced carbonate precipitation for soil improvement.” J. Geotech. Geoenviron. Eng., 587–598.
McVay, M., Bloomquist, D., Forbes, H., and Johnson, J. (2009). “Precasted concrete pile installation: Utilized jetting and pressure grouting.”, Florida DOT, Tallahassee, FL.
Mortensen, B. M., Haber, M. J., DeJong, J. T., Caslake, L. F., and Nelson, D. C. (2011). “Effects of environmental factors on microbial induced calcium carbonate precipitation.” J. Appl. Microbiol., 111(2), 338–349.
Ni, L., Suleiman, M. T., and Raich, A. (2016). “Behavior and soil-structure interaction of pervious concrete ground improvement piles under lateral loading.” J. Geotech. Geoenviron. Eng., 04015071.
Palmer, M. C., O’Rourke, T. D., Olson, N. A., Abdoun, T., Ha, D., and O’Rourke, M. J. (2009). “Tactile pressure sensors for soil-structure interaction assessment.” J. Geotech. Geoenviron. Eng., 1638–1645.
Plumbridge, G. D., and Hill, S. J. (2001). “Performance of shaft grouted piles and barrettes.” Proc., 14th Southeast Asian Geotechnical Conf.: Geotechnical Engineering: Meeting Society’s Needs, A. A. Balkema, Lisse, Netherlands, 407–412.
Ruiz, M. and Pando, M. (2009). “Load transfer mechanisms of tip post-grouted drilled shafts in sand.” Contemporary topics in deep foundations, ASCE, Reston, VA, 23–30.
Stocks-Fischer, S., Galinat, J. K., and Bang, S. S. (1999). “Microbiological precipitation of .” Soil Biol. Biochem., 31(11), 1563–1571.
Suleiman, M. T., Ni, L., Davis, C., Lin, H., and Xiao, S. (2015). “Installation effects of controlled modulus column ground improvement piles on surrounding soil.” J. Geotech. Geoenviron. Eng., 04015059.
Suleiman, M. T., Ni, L., and Raich, A. (2014). “Development of pervious concrete pile ground-improvement alternative and behavior under vertical loading.” J. Geotech. Geoenviron. Eng., 04014035.
Talesnick, M. (2013). “Measuring soil pressure within a soil mass.” Can. Geotech. J., 50(7), 716–722.
Thiyyakkandi, S., McVay, M., Bloomquist, D., and Lai, P. (2013). “Measured and predicted response of a new jetted and grouted precast pile with membranes in cohesionless soils.” J. Geotech. Geoenviron. Eng., 1334–1345.
van Paassen, L., Daza, C., Staal, M., Sorokin, D. Y., van der Zon, W., and van Loosdrecht, M. (2010a). “Potential soil reinforcement by biological denitrification.” Ecol. Eng., 36(2), 168–175.
van Paassen, L., Ghose, R., van der Linden, T., van der Star, W., and van Loosdrecht, M. (2010b). “Quantifying biomediated ground improvement by ureolysis: Large-scale biogrout experiment.” J. Geotech. Geoenviron. Eng., 1721–1728.
van Paassen, L. A. (2009). “Biogrout ground improvement by microbially induced carbonate precipitation.” Ph.D. thesis, Delft Univ. of Technology, Delft, Netherlands.
van Paassen, L. A., van Loosdrecht, M. C. M., Pieron, M., Mulder, A., Ngan-Tillard, D. J. M., and van der Linden, T. J. M. (2012). “Strength and deformation of biologically cemented sandstone.” Proc., Reg. Symp. of the Int. Society for Rock Mechanics, EUROCK 2009, Taylor & Francis Group, London, 405–410.
Weil, M. H., DeJong, J. T., Martinez, B. C., and Mortensen, B. M. (2012). “Seismic and resistivity measurements for real-time monitoring of microbially induced calcite precipitation in sand.” Geotech. Test. J., 35(2), 1–11.
Yun, T. S., and Santamarina, J. C. (2005). “Decementation, softening, and collapse: Changes in small-strain shear stiffness in K0 loading.” J. Geotech. Geoenviron. Eng., 350–358.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jul 2, 2015
Accepted: Feb 4, 2016
Published online: May 23, 2016
Published in print: Oct 1, 2016
Discussion open until: Oct 23, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.