Centrifuge Modeling of Pile-Sand Interaction Induced by Normal Faulting
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 142, Issue 10
Abstract
Many forensic studies conducted after catastrophic earthquakes revealed severe damages to pile foundations caused by bedrock fault movement. The mechanism behind these pile foundation failures is not yet fully understood. In this study, two centrifuge model tests are carried out on a single pile and on a group of three piles in sand subjected to normal faulting. The surface settlement profile and additional internal forces of the piles are measured. The surface settlement profile in sand could be well fitted and predicted with a profile function (error function). The single pile, which is located in a differential settlement zone, is displaced, and the pile top rotates toward the hanging wall, inducing an additional bending moment along the pile. The pile group is then forced to rotate toward the hanging wall because the three piles are well connected to the pile cap. Driven by the movement of the two additional piles and a pile cap in place, the pile on the footwall side experiences greater displacement and bending moment than it does when it is only for a single pile. Due to relative downward displacement of the surrounding soil, negative shaft friction is mobilized and the middle pile could fail in tension. Both the downward drag force in the middle pile and the working load are transferred to the other two piles, resulting in pile failure that exceeds the ultimate capacity.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the China Postdoctoral Science Foundation (Project No. 2013M541854), the Promotion Program for Young and Middle-aged Teachers in Science and Technology Research of Huaqiao University (Project No. ZQN-PY216), the Natural Science Foundation of Fujian Province of China (Project No. 2014J01194), and the National Natural Science Foundation of China (Grant No. 51208218).
References
Ahmed, W., and Bransby, M. F. (2009). “Interaction of shallow foundations with reverse faults.” J. Geotech. Geoenviron. Eng., 914–924.
Anastasopoulos, I., and Gazetas, G. (2007). “Foundation-structure systems over a rupturing normal fault: Part I. Observations after the Kocaeli 1999 earthquake.” Bull. Earthquake Eng., 5(3), 253–275.
Anastasopoulos, I., Gazetas, G., Bransby, M. F., Davies, M. C. R., and El Nahas, A. (2007). “Fault rupture propagation through sand: Finite-element analysis and validation through centrifuge experiments.” J. Geotech. Geoenviron. Eng., 943–958.
Anastasopoulos, I., Gazetas, G., Bransby, M. F., Davies, M. C. R., and El Nahas, A. (2009). “Normal fault rupture interaction with strip foundations.” J. Geotech. Geoenviron. Eng., 359–370.
Anastasopoulos, I., Gazetas, G., Drosos, V., Georgarakos, T., and Kourkoulis, R. (2008a). “Design of bridges against large tectonic deformation.” Earthquake Eng. Eng. Vib., 7(4), 345–368.
Anastasopoulos, I., Gerolymos, N., Gazetas, G., and Bransby, M. F. (2008b). “Simplified approach for design of raft foundations against fault rupture. Part I: Free-field.” Earthquake Eng. Eng. Vib., 7(2), 147–163.
Anastasopoulos, I., Kourkoulis, R., Gazetas, G., and Tsatsis, A. (2013). “Interaction of piled foundation with rupturing normal fault.” Geotechnique, 63(12), 1042–1059.
Bolton, M. D. (1986). “The strength and dilatancy of sands.” Geotechnqiue, 36(1), 65–78.
Bransby, M. F., Davies, M. C. R., El Nahas, A., and Nagaoka, S. (2008a). “Centrifuge modelling of normal fault-foundation interaction.” Bull. Earthquake Eng., 6(4), 585–605.
Bransby, M. F., Davies, M. C. R., El Nahas, A., and Nagaoka, S. (2008b). “Centrifuge modelling of reverse fault-foundation interaction.” Bull. Earthquake Eng., 6(4), 607–628.
Bray, J. D., Seed, R. B., Cluff, L. S., and Seed, H. B. (1994). “Earthquake fault rupture propagation through soil.” J. Geotech. Eng., 543–561.
Cai, Q. P., and Ng, C. W. W. (2013). “Analytical approach for estimating ground deformation profile induced by normal faulting in undrained clay.” Can. Geotech. J., 50(4), 413–422.
Cai, Q. P., Ng, C. W. W., Luo, G. Y., and Hu, P. (2013). “Influences of pre-existing fracture on ground deformation induced by normal faulting in mixed ground conditions.” J. Central South Univ., 20(2), 501–509.
Dong, J. J., Wang, C. D., Lee, C. T., Liao, J. J., and Pan, Y. W. (2004). “The influence of surface ruptures on building damage in the 1999 Chi-Chi earthquake: A case study in Fengyuan City.” Eng. Geol., 71(1-2), 157–179.
Faccioli, E., Anastasopoulos, I., Gazetas, G., Callerio, A., and Paolucci, R. (2008). “Fault rupture-foundation interaction: Selected case histories.” Bull. Earthquake Eng., 6(4), 557–583.
Ishihara, K. (1993). “Liquefaction and flow failure during earthquakes.” Geotechnique, 43(3), 351–415.
Loli, M., Bransby, M. F., Anastasopoulos, I., and Gazetas, G. (2012). “Interaction of caisson foundations with a seismically rupturing normal fault: Centrifuge testing versus numerical simulation.” Geotechnique, 62(1), 29–43.
Ng, C. W. W., Cai, Q. P., and Hu, P. (2012). “Centrifuge and numerical modeling of fault rupture propagation in clay with and without a pre-existing fracture.” J. Geotech. Geoenviron. Eng., 1492–1502.
Ng, C. W. W., Li, X. S., Van Laak, P. A., and Hou, D. Y. J. (2004). “Centrifuge modeling of loose fill embankment subjected to uni-axial and bi-axial earthquakes.” Soil Dyn. Earthquake Eng., 24(4), 305–318.
Ng, C. W. W., and Lu, H. (2014). “Effects of the construction sequence of twin tunnels at different depths on an existing pile.” Can. Geotech. J., 51(2), 173–183.
Schofield, A. N. (1980). “Cambrigde geotechnical centrifuge operations.” Geotechnique, 30(3), 227–268.
Stone, K. J. L., and Wood, D. M. (1992). “Effects of dilatancy and particle size observed in model tests on sand.” Soils Found., 32(4), 43–57.
White, D. J., Take, W. A., and Bolton, M. D. (2003). “Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry.” Geotechnique, 53(7), 619–631.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 18, 2014
Accepted: Jan 21, 2016
Published online: May 24, 2016
Published in print: Oct 1, 2016
Discussion open until: Oct 24, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.