Laboratory and In Situ Tests for Long-Term Hydraulic Conductivity of a Cement-Bentonite Cutoff Wall
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 136, Issue 4
Abstract
Slurry trench cutoff walls, constructed using self-hardening slag-cement-bentonite (Slag-CB), are the most common form of in-ground vertical contaminant barrier in the U.K., Europe, and Japan, and are increasingly being used in the United States. This paper presents a case study of the hydraulic conductivity evaluation of an 11-year-old Slag-CB wall material at a sulfate-contaminated site, using different in situ techniques and laboratory tests. The laboratory results suggest that the hydraulic conductivity of the samples, which vary in age from 4 weeks to 11 years, decreases with time for the first 3 years but then remains constant. The results indicate that the long-term performance of these containment walls is influenced by various parameters such as aging, the type/duration of contaminant exposure, mixing of surrounding soil during construction, and wall depth. Piezocone tests, packer tests, and self-boring permeameter tests were carried out in the field to determine the suitability of different in situ techniques and compare with the laboratory results. The hydraulic conductivity is affected by the type of in situ technique used and the geometric scale of the test section.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank the EPSRC-GB for funding of the research project (Grant No. EPSRC-GBGR/R98150/01), as well as the Cambridge Commonwealth Trust. Also, gratitude must be paid to the assistance provided by Ken Watts of BRE in conducting the Piezocone work, as well as in the project management of the site. Steve Chandler and Chris Knight of Cambridge University Engineering Department are to be acknowledged for general assistance in the laboratory and field studies.
References
BRE Special Digest 1. (2005). “Concrete in aggressive ground.” BRE, U.K.
Britton, J. P., Filz, G. M., and Herring, W. E. (2004). “Measuring the hydraulic conductivity of soil-bentonite backfill.” J. Geotech. Geoenviron. Eng., 130(12), 1250–1258.
Britton, J. P., Filz, G. M., and Little, J. C. (2005). “The effect of variability in hydraulic conductivity on contaminant transport through soil-bentonite cut-off walls.” J. Geotech. Geoenviron. Eng., 131(8), 951–957.
Britton, J. P., Filz, G. M., Little, J. C., and Herring, W. (2002). “Shape factors for single-well tests in soil-bentonite cutoff walls.” Proc. 4th Int. Congress on Environmental Geotechnics, Taylor and Francis, Rio de Janeiro, Brazil, 639–644.
Burns, S. E., and Mayne, P. W. (1999). “Pore pressure dissipation behavior surrounding driven piles and cone penetrometers.” Transportation Research Record. 1675, Transportation Research Board, Washington, D.C., 17–23.
Cambridge In Situ. (2000). “Report on self-boring pressuremeter and self-boring permeameter work.” Cambridge, U.K.
Garvin, S. L., and Hayles, C. S. (1999). “The chemical compatibility of cement-bentonite cut-off wall material.” J. Construct. Build. Mater., 13, 329–341.
ICE. (1999). Specification for construction of slurry trench cut-off walls as barriers to pollution migration, Thomas Telford, London.
Jefferis, S. A. (1992). “Contaminant-grout interaction.” Geotech. Spec. Publ., 30, 1393–1402.
Jefferis, S. A. (2008). “Reactive transport in cut-off walls and implication for wall durability.” Proc., GeoCongress 2008: The Challenge of Sustainability in the Geoenvironment, ASCE, Reston, Va., 652–659.
Joshi, K. (2009). “Long-term performance and in-situ assessment of cement-bentonite cut-off wall.” Ph.D. thesis, Univ. of Cambridge.
Joshi, K., Soga, K., Ng, M. Y. A., and Kechavarzi, C. (2008). “Durability study of eleven year old cement-bentonite cut-off wall material.” Proc., GeoCongress 2008: The Challenge of Sustainability in the Geoenvironment, ASCE, Reston, Va., 620–627.
Lambe, T. W., and Whitman, R. V. (1979). Soil Mechanics, SI Version, Wiley, New York, 281–285.
Lunne, T., Robertson, P. K., and Powell, J. J. M. (1997). Cone Penetration Testing in Geotechnical Practice, Blackie Academic & Professional, 78–81.
Manassero, M. (1994). “Hydraulic conductivity assessment of slurry wall using piezocone test.” J. Geotech. Engrg., 120(10), 1725–1747.
Manassero, M., Fratalocchi, E., Pasqualini, E., Spanna, C., and Verga, F. (1995). “Containment with vertical cut-off walls.” Proc., Geoenvironment 2000 Geotechnical Special Publication, Vol. 46, ASCE, Reston, Va., 1142–1172.
Ng, M. Y. A. (2008). “Modelling of hydraulic fracturing in cement bentonite geomaterials.” Ph.D. thesis, Univ. of Cambridge.
Opdyke, S. M., and Evans, J. C. (2005). “Slag-cement-bentonite slurry walls.” J. Geotech. Geoenviron. Eng., 131(6), 673–681.
Osman, A. (2007). “Durability and mechanical properties of deep-mixed clays.” Ph.D. thesis, Univ. of Cambridge.
Ratnam, S., Soga, K., Mair, R. J., Whittle, R. W., and Tedd, P. (2001). “An in-situ permeability measurement technique for cut-off walls using the Cambridge self-boring pressuremeter.” Proc., 15th Int. Conf. on Soil Mechanics and Geotechnical Engineering, Vol. 1, Balkema, Istanbul, 491–494.
Soga, K., Sutherland, K. J., Kechavarzi, C., and Whittle, R. W. (2005). “In-situ permeability measurement of a contaminant containment wall.” Proc., 16th Int. Conf. on Soil Mechanics and Geotechnical Engineering, Mill Press, Osaka, 2445–2448.
Tedd, P., Holton, I. R., Butcher, A. P., Wallace, S., and Daly, P. J. (1997). “Investigation of the performance of cement-bentonite cut-off walls in aggressive ground at a disused gasworks site.” Proc., 1st Int. Containment Technology Conf., 125–132.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Oct 17, 2008
Accepted: Sep 5, 2009
Published online: Sep 11, 2009
Published in print: Apr 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.