Theoretical Study on Pile Length Optimization of Pile Groups and Piled Rafts
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 136, Issue 2
Abstract
Pile groups are frequently designed with equal or similar pile lengths. However, the significant interaction effects among equal-length piles imply that this may not be the optimized configuration. This paper presents the optimization analyses of piled rafts and freestanding pile groups, where pile lengths are varied across the group to optimize the overall foundation performance. The results of the analyses are applicable in cases where the piles derive a majority of the capacity from the frictional resistance. It is demonstrated that, with the same amount of total pile material, an optimized pile length configuration can both increase the overall stiffness of the foundation and reduce the differential settlements that may cause distortion and cracking of the superstructure. The benefits of the optimization can be translated to economic and environmental savings as less material is required to attain the required level of foundation performances. The reliability of the optimization benefits in relation to construction-induced variability is also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work presented in this paper is part of the Smart Foundations project (Grant No. UNSPECIFIEDEP/D040000/1) funded by the Engineering and Physical Sciences Research Council (EPSRC). Their financial support is gratefully acknowledged. The first writer would also like to express his gratitude to the Cambridge Overseas Trust (COT) for additional funding supporting his study at the Cambridge University.UNSPECIFIED
References
Butterfield, R., and Banerjee, P. K. (1971). “The elastic analysis of compressible piles and pile groups.” Geotechnique, 21(1), 43–60.
Chan, K. S., Karasudhi, P., and Lee, S. L. (1974). “Force at a point in the interior of a layered elastic half space.” Int. J. Solids Struct., 10, 1179–1199.
Chin, J. T., Chow, Y. K., and Poulos, H. G. (1990). “Numerical analysis of axially loaded vertical piles and pile groups.” Comput. Geotech., 9, 273–290.
Chow, Y. K. (1987). “Iterative analysis of pile-soil-pile interaction.” Geotechnique, 37(3), 321–333.
Chow, Y. K., and Thevendran, V. (1987). “Optimisation of pile groups.” Comput. Geotech., 4, 43–58.
Coyle, H. M., and Reese, L. C. (1966). “Load transfer for axially loaded piles in clay.” J. Soil Mech. and Found. Div., 89(2), 1–25.
Duncan, J. M. (2000). “Factors of safety and reliability in geotechnical engineering.” J. Geotech. Geoenviron. Eng., 126(4), 307–316.
Franke, E., El-Mossallamy, Y., and Wittmann, P. (2000). “Calculation methods for raft foundations in Germany.” Design applications of raft foundations, Thomas Telford, London, 283–322.
Guo, W. D., and Randolph, M. F. (1997). “Vertically loaded piles in non-homogeneous media.” Int. J. Numer. Analyt. Meth. Geomech., 21, 507–532.
Hain, S. J., and Lee, I. K. (1978). “The analysis of flexible raft-pile systems.” Geotechnique, 28(1), 65–93.
Horikoshi, K., and Randolph, M. F. (1997). “On the definition of raft-soil stiffness ratio for rectangular rafts.” Geotechnique, 47(5), 1055–1061.
Horikoshi, K., and Randolph, M. F. (1998). “A contribution to optimum design of piled rafts.” Geotechnique, 48(3), 301–317.
Katzenbach, R., Arslan, U., and Moormann, C. (2000). “Piled raft foundation projects in Germany.” Design applications of raft foundation, Thomas Telford, London, 323–391.
Kim, H. T., Yoo, H. K., and Kang, I. K. (2002). “Genetic algorithm-based optimum design of piled raft foundations with model tests.” Geotech. Eng., 33(1), 1–11.
Kim, K. N., Lee, S., Kim, K., Chung, C., Kim, M. M., and Lee, H. S. (2001). “Optimal pile arrangement for minimizing differential settlements in piled raft foundations.” Comput. Geotech., 28, 235–253.
Klar, A., Spasojevic, A. D., and Soga, K. (2004). “Continuum solution of lateral loading of large pile groups.” Technical Rep. No. CUED/D TR 334, Cambridge University, Cambridge, U.K.
Klar, A., Vorster, T. E. B., Soga, K., and Mair, R. J. (2007). “Elastoplastic solution for soil-pipe-tunnel interaction.” J. Geotech. Geoenviron. Eng., 133(7), 782–792.
Lee, K. M., and Xiao, Z. R. (2001). “A simplified nonlinear approach for pile group settlement analysis in multilayered soils.” Can. Geotech. J., 38(5), 1063–1080.
Leung, Y. F., Klar, A., and Soga, K. (2008). “Optimization analysis of pile length distribution of squared pile groups.” Proc., 2nd BGA Int. Conf. on Foundations, ICOF2008, M. J. Brown, M. F. Bransby, A. J. Brennan, and J. A. Knappett, eds., IHS BRE, Watford, U.K., 505–516.
Liew, S. S., Gue, S. S., and Tan, Y. C. (2002). “Design and instrumentation results of a reinforcement concrete piled raft supporting 2500 ton oil storage tank on very soft alluvium deposits.” Proc., 9th Int. Conf. on Piling and Deep Foundations, Deep Foundations Institute, 263–269.
Mindlin, R. D. (1936). “Force at a point in the interior of a semi-infinite solid.” Physics, 7, 195–202.
Padfield, C. J., and Sharrock, M. J. (1983). Settlement of structures on clay soils, Construction Industry Research and Information Association (CIRIA), U.K.
Poulos, H. G. (1968). “Analysis of the settlement of pile groups.” Geotechnique, 18(4), 449–471.
Poulos, H. G. (1989). “Pile behaviour—Theory and application.” Geotechnique, 39(3), 365–415.
Poulos, H. G. (1991). “Analysis of piled strip foundations.” Computer methods and advances in geomechanics, G. Beer, J. R. Booker, and J. P. Carter, eds., Balkema, Rotterdam, The Netherlands, 183–191.
Poulos, H. G. (1994). “An approximate numerical analysis of pile-raft interaction.” Int. J. Numer. Analyt. Meth. Geomech., 18, 73–92.
Poulos, H. G. (2001). “Piled raft foundations—Design and applications.” Geotechnique, 51(2), 95–113.
Poulos, H. G., Carter, J. P., and Small, J. C. (2001). “Foundations and retaining structures—Research and practice.” Proc., 15th Conf. on Soil Mechanics and Geotechnical Engineering, Vol. 4, 2527–2606.
Poulos, H. G., and Davis, E. H. (1968). “The settlement behaviour of single axially-loaded incompressible piles and piers.” Geotechnique, 18(3), 351–371.
Poulos, H. G., and Davis, E. H. (1980). Pile foundation analysis and design, Wiley, New York.
Poulos, H. G., Small, J. C., Ta, L. D., Sinha, J., and Chen, L. (1997). “Comparison of some methods for analysis of piled rafts.” Proc., 14th Conf. on Soil Mechanics and Foundation Engineering, Vol. 2, Balkema, Rotterdam, The Netherlands, 1119–1124.
Randolph, M. F. (1983). “Design of piled raft foundations.” CUED/D TR 143, Cambridge University, U.K.
Randolph, M. F., and Wroth, C. P. (1979). “An analysis of the vertical deformation of pile groups.” Geotechnique, 29(4), 423–439.
Reul, O., and Randolph, M. F. (2003). “Piled rafts in overconsolidated clay: comparison of in situ measurements and numerical analyses.” Geotechnique, 53(3), 301–315.
Reul, O., and Randolph, M. F. (2004). “Design strategies for piled rafts subjected to nonuniform vertical loading.” J. Geotech. Geoenviron. Eng., 130(1), 1–13.
Sinha, J. (1998). “Piled raft foundation systems in expansive soils.” Ph.D. thesis, Univ. of Sydney, Australia.
Ta, L. D., and Small, J. C. (1996). “Analysis of piled raft systems in layered soils.” Int. J. Numer. Analyt. Meth. Geomech., 20, 57–72.
Tan, Y. C., Chow, C. M., and Gue, S. S. (2005). “Piled raft with different pile length for medium-rise buildings on very soft clay.” Proc., 16th Int. Conf. Soil Mechanics and Geotechnical Engineering, Balkema, Rotterdam, The Netherlands, 2045–2048.
U.S. Naval Facilities Engineering Command. (1982). “Foundations and earth structures.” NAVFAC design manual DM-7.2, U.S. Government Printing Office, Washington, D.C.
Valliappan, S., Tandjiria, V., and Khalili, N. (1999). “Design of raft-pile foundation using combined optimization and finite element approach.” Int. J. Numer. Analyt. Meth. Geomech., 23, 1043–1065.
Zienkiewicz, O. C., and Taylor, R. L. (2005). “The finite element method for solid and structural mechanics.” 6th Ed., Butterworth-Heinemann, Stoneham, Mass.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jun 4, 2008
Accepted: Jul 26, 2009
Published online: Aug 1, 2009
Published in print: Feb 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.