Effect of Roughness on Seismic Bearing Capacity of Shallow Foundations near Slopes Using the Lower Bound Finite Element Method
Publication: International Journal of Geomechanics
Volume 21, Issue 3
Abstract
A lower bound finite element analysis in conjunction with linear programming technique was used to evaluate the effect of soil–foundation interface roughness on the seismic limit load of shallow foundations placed in the vicinity of slopes. The approach followed in this study to take into account seismic forces is pseudostatic. The roughness factor (δ/φ) at soil–foundation interface was considered in a complete range of 0 (perfectly smooth) to 1 (fully rough) stepwise with an increment of 1/3. Furthermore, the effects of superstructure seismic inertia forces, and nonlinear programming, which is called second-order cone programming, are also addressed. The formulation of the finite element lower solution was extended for the case of pseudostatic conditions. The findings of this study have been compared with solutions reported in the literature, and the consistency of the results confirmed the formulation of the extended finite element lower bound in the presence of seismic forces. Results of the current study clearly endorse the fact that the soil–foundation interface roughness exhibits more highlighted contributions when a footing is underlain by an adjacent slope and subject to seismic loading. The results of the current study are presented in the form of table design charts.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
On behalf of all the authors, the corresponding author states that there is no conflict of interest. The authors declare that they did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.
This paper is a part of research jointly conducted by the first author, Mr. Ardavan Izadi, who is a Ph.D. student in University of Guilan, the second author, Mr. Ahmad Foroutan Kalourazi, who is a M.Sc student in the same university, and the third author, Professor Reza Jamshidi Chenari, who is the supervisor for both of the mentioned students. The coding and the algorithms development was carried out by the students, especially Mr. Ardavan Izadi, and the methodology, decision on the parameter’s selection, and the format of presentation of the graphs and also the English language editing task was contributed by Professor Reza Jamshidi Chenari.
References
Castelli, F., and E. Motta. 2010. “Bearing capacity of strip footings near slopes.” Geotech. Geol. Eng. 28: 187–198. https://doi.org/10.1007/s10706-009-9277-9.
Chakraborty, D., and J. Kumar. 2013. “Bearing capacity of foundations on slopes.” Geomech. Geoeng. 8 (4): 274–285. https://doi.org/10.1080/17486025.2013.770172.
Choudhury, D., and K. Subba Rao. 2006. “Seismic bearing capacity of shallow strip footings embedded in slope.” Int. J. Geomech. 6 (3): 176–184. https://doi.org/10.1061/(ASCE)1532-3641(2006)6:3(176).
CEN (European Committee for Standardization). 2004a. Design of structures for earthquake resistance part 5: foundations, retaining structures and geotechnical aspects. Eurocode 8. Brussel, Belgium: CEN.
CEN (European Committee for Standardization). 2004b. Design of structures for earthquake resistance part 1: general rules, seismic actions and rules for buildings. Eurocode 8. Brussel, Belgium: CEN.
Farzaneh, O., F. Askari, and N. Ganjian. 2008. “Three-dimensional stability analysis of convex slopes in plan view.” J. Geotech. Geoenviron. Eng. 134 (8): 1192–1200. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:8(1192).
Foroutan Kalourazi, A., A. Izadi, and R. Jamshidi Chenari. 2019. “Seismic bearing capacity of shallow strip foundations in the vicinity of slopes using the lower bound finite element method.” Soils Found. 59 (6): 1891–1905. https://doi.org/10.1016/j.sandf.2019.08.014.
Georgiadis, K. 2010. “Undrained bearing capacity of strip footings on slopes.” J. Geotech. Geoenviron. Eng. 136 (5): 677–685. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000269.
Georgiadis, K., A. Karatzetzou, and M. Lazari. 2008. “Undrained bearing capacity interaction diagrams for strip footings on slopes.” In Proc., 2nd BGA Int. Conf. on Foundations, 1673–1682. Thomas Telford, London: Np.
Hjiaj, M., A. V. Lyamin, and S. W. Sloan. 2005. “Numerical limit analysis solutions for the bearing capacity factor Nγ.” Int. J. Solids Struct. 42: 1681–1704. https://doi.org/10.1016/j.ijsolstr.2004.08.002.
Izadi, A., M. Nazemi Sabet Soumehsaraei, R. Jamshidi Chenari, and A. Ghorbani. 2019a. “Pseudo-static bearing capacity of shallow foundations on heterogeneous marine deposits using limit equilibrium method.” Mar. Georesour. Geotechnol. 37 (10): 1163–1174. https://doi.org/10.1080/1064119X.2018.1539535.
Izadi, A., M. Nazemi Sabet Soumehsaraei, R. Jamshidi Chenari, S. Moallemi, and S. Javankhoshdel. 2019b. “Spectral bearing capacity analysis of strip footings under pseudo-dynamic excitation.” Geomech. Geoeng. 1–20. https://doi.org/10.1080/17486025.2019.1670873.
Jamshidi Chenari, R., A. Izadi, and M. N. Somesaraie. 2018. “Discussion of “seismic bearing capacity of shallow strip footing with Coulomb failure mechanism using limit equilibrium method” by S. Ghosh, L. Debnath. December 2017, Volume 35, Issue 6, pp. 2647–2661.” Geotech. Geol. Eng. 36 (6): 4037–4040. https://doi.org/10.1007/s10706-018-0497-8.
Krabbenhoft, K., A. V. Lyamin, M. Hjiaj, and S. W. Sloan. 2005. “A new discontinuous upper bound limit analysis formulation.” Int. J. Numer. Methods Eng. 63: 1069–1088. https://doi.org/10.1002/nme.1314.
Kumar, J. 2009. “The variation of Nγ with footing roughness using the method of characteristics.” Int. J. Numer. Anal. Methods Geomech. 33: 275–284. https://doi.org/10.1002/nag.716.
Kumar, J., and D. Chakraborty. 2013. “Seismic bearing capacity of foundations on cohesionless slopes.” J. Geotech. Geoenviron. Eng. 139 (11): 1986–1993. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000909.
Kumar, J., and P. Ghosh. 2006. “Seismic bearing capacity for embedded footings on sloping ground.” Géotechnique 56 (2): 133–140. https://doi.org/10.1680/geot.2006.56.2.133.
Kumar, J., and V. N. Khatri. 2008. “Effect of footing roughness on lower bound Nγ values.” Int. J. Geomech. 8 (3): 176–187. https://doi.org/10.1061/(ASCE)1532-3641(2008)8:3(176).
Kumar, J., and K. M. Kouzer. 2007. “Effect of footing roughness on bearing capacity factor Nγ.” J. Geotech. Geoenviron. Eng. 133 (5): 502–511. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:5(502).
Kumar, J., and N. Kumar. 2003. “Seismic bearing capacity of rough footings on slopes using limit equilibrium.” Géotechnique 53 (3): 363–369. https://doi.org/10.1680/geot.2003.53.3.363.
Kumar, J., and V. B. K. Mohan Rao. 2003. “Seismic bearing capacity of foundations on slopes.” Géotechnique 53 (3): 347–361. https://doi.org/10.1680/geot.2003.53.3.347.
Leshchinsky, B. 2015. “Bearing capacity of footings placed adjacent to c′-ϕ′ slopes.” J. Geotech. Geoenviron. Eng. 141 (6): 04015022. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001306.
Lyamin, A. V., and S. W. Sloan. 2002a. “Lower bound limit analysis using non-linear programming.” Int. J. Numer. Methods Eng. 55: 573–611. https://doi.org/10.1002/nme.511.
Lyamin, A. V., and S. W. Sloan. 2002b. “Upper bound limit analysis using linear finite elements and non-linear programming.” Int. J. Numer. Anal. Methods Geomech. 26: 181–216. https://doi.org/10.1002/nag.198.
Makrodimopoulos, A., and C. M. Martin. 2007. “Upper bound limit analysis using simplex strain elements and second-order cone programming.” Int. J. Numer. Anal. Methods Geomech. 31 (6): 835–865. https://doi.org/10.1002/nag.567.
Martin, C. M. 2005. “Exact bearing capacity calculations using the method of characteristics.” In Vol. 4 of Proc., 11th Conf. of IACMAG in Turin, 441–450. Bologna, Italy: Pàtron Ed.
Shiau, J., R. Merifield, A. Lyamin, and S. W. Sloan. 2011. “Undrained stability of footings on slopes.” Int. J. Geomech. 11 (5): 381–390. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000092.
Sloan, S. 1988. “Lower bound limit analysis using finite elements and linear programming.” Int. J. Numer. Anal. Methods Geomech. 12: 61–77. https://doi.org/10.1002/nag.1610120105.
Sloan, S. 1989. “Upper bound limit analysis using finite elements and linear programming.” Int. J. Numer. Anal. Methods Geomech. 13: 263–282. https://doi.org/10.1002/nag.1610130304.
Smith, C. C. 2005. “Complete limiting stress solutions for the bearing capacity of strip footings on a Mohr-Coulomb soil.” Géotechnique 55 (8): 607–612. https://doi.org/10.1680/geot.2005.55.8.607.
Soubra, A.-H. 1999. “Upper-bound solutions for bearing capacity of foundations.” J. Geotech. Geoenviron. Eng. 125 (1): 59–68. https://doi.org/10.1061/(ASCE)1090-0241(1999)125:1(59).
Ukritchon, B., A. J. Whittle, and C. Klangvijit. 2003. “Calculations of bearing capacity factor Nγ using numerical limit analyses.” J. Geotech. Geoenviron. Eng. 129 (5): 468–474. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:6(468).
Ukritchon, B., S. Yoang, and S. Keawsawasvong. 2018. “Bearing capacity of shallow foundations in clay with linear increase in strength and adhesion factor.” Mar. Georesour. Geotechnol. 36 (4): 438–451. https://doi.org/10.1080/1064119X.2017.1326991.
Veiskarami, M., R. Jamshidi Chenari, and A. A. Jameei. 2017. “Bearing capacity of strip footings on anisotropic soils by the finite elements and linear programming.” Int. J. Geomech. 17 (12): 04017119. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001018.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Apr 1, 2020
Accepted: Oct 1, 2020
Published online: Dec 28, 2020
Published in print: Mar 1, 2021
Discussion open until: May 28, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.