Failure Process of a Single Stone Column in Soft Soil beneath Rigid Loading: Numerical Study
Publication: International Journal of Geomechanics
Volume 20, Issue 8
Abstract
The discrete element method–finite difference method (DEM--FDM) numerical simulation was conducted to investigate the failure process and the bearing mechanism of the single stone column in soft soil beneath rigid loading. The stone column was modeled by discrete rigid blocks, and the surrounding soil was represented using the Mohr–Coulomb constitutive model. The settlement, bulging deformation, and failure process were tracked during the complete loading process, which enables the footing–column–soil interactions to be observed visually. The typical load–settlement curves and corresponding failure mechanisms are graphically illustrated according to the numerical analysis. The larger loading plate will help to enhance the bearing capacity of stone columns but not intensively. The stiffness of surrounding soils controls the final failure mode. The local shear failure mode is much more likely to happen for the single stone column beneath rigid loading when the surrounding soils are relatively soft compared to their shear strengths. The existing analytical formulas may overestimate the ultimate bearing capacity of a single stone column in soft soils.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by Innovative Hunan Province Special Funds (ID 2019GK1011) the National Natural Science Foundation of China (ID 51508181), and the Natural Science Foundation of Hunan Province of China (ID 2019JJ50056).
References
Alexiew, D., D. Brokemper, and S. Lothspeich. 2005. “Geotextile encased columns (GEC): Load capacity, geotextile selection and pre-design graphs.” In Geo-Frontiers Congress, 1–14. Reston, VA: ASCE.
Ali, K., J. T. Shahu, and K. G. Sharma. 2012. “Model tests on geosynthetic-reinforced stone columns: A comparative study.” Geosynthetics Int. 19 (4): 292–305. https://doi.org/10.1680/gein.12.00016.
Bouassida, M., and T. Hadhri. 1995. “Extreme load of soils reinforced by columns: The case of an isolated column.” Soils Found. 35 (1): 21–35. https://doi.org/10.3208/sandf1972.35.21.
Brauns, J. 1978. “The initial load of graval pile in the clay foundation.” Constr. Technol. 55 (8): 263–271.
Castro, J. 2016. “An analytical solution for the settlement of stone columns beneath rigid footings.” Acta Geotech. 11 (2): 309–324. https://doi.org/10.1007/s11440-014-0358-4.
Castro, J. 2017. “Modeling stone columns.” Materials 10 (7): 782. https://doi.org/10.3390/ma10070782.
Chen, J.-F., J. Han, S. Oztoprak, and X. Yang. 2009. “Behavior of single rammed aggregate piers considering installation.” Comput. Geotech. 36 (7): 1191–1199. https://doi.org/10.1016/j.compgeo.2009.05.007.
Cundall, P. 1980. UDEC—A generalised distinct element program for modelling jointed rock. Rep. No. PCAR-1-80. New York: US Army Research and Standardization Group.
Cundall, P. A., and R. D. Hart. 1992. “Numerical modelling of discontinua.” Eng. Comput. 9 (2): 101–113. https://doi.org/10.1108/eb023851.
Das, A. K., and K. Deb. 2018. “Experimental and 3D numerical study on time-dependent behavior of stone column-supported embankments.” Int. J. Geomech. 18 (4): 04018011. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001110.
Gniel, J., and A. Bouazza. 2009. “Improvement of soft soils using geogrid encased stone columns.” Geotext. Geomembr. 27 (3): 167–175. https://doi.org/10.1016/j.geotexmem.2008.11.001.
Greenwood, D. A. 1970. “Mechanical improvement of soils below ground surfaces.” In Proc., Ground Engineering Conf., 11–22. London: Institution of Civil Engineers.
Gu, M., J. Han, and M. Zhao. 2017a. “Three-dimensional discrete-element method analysis of stresses and deformations of a single geogrid-encased stone column.” Int. J. Geomech. 17 (9): 04017070. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000952.
Gu, M., J. Han, and M. Zhao. 2017b. “Three-dimensional DEM analysis of single geogrid-encased stone columns under unconfined compression: A parametric study.” Acta Geotech. 12 (3): 559–572. https://doi.org/10.1007/s11440-017-0547-z.
Han, J., and S. L. Ye. 2002. “A theoretical solution for consolidation rates of stone column-reinforced foundations accounting for smear and well resistance effects.” Int. J. Geomech. 2 (2): 135–151. https://doi.org/10.1061/(ASCE)1532-3641(2002)2:2(135).
Hanna, A. M., M. Etezad, and T. Ayadat. 2013. “Mode of failure of a group of stone columns in soft soil.” Int. J. Geomech. 13 (1): 87–96. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000175.
Hughes, J. M. O., N. J. Withers, and D. A. Greenwood. 1975. “A field trial of the reinforcing effect of a stone column in soil.” Géotechnique 25 (1): 31–44. https://doi.org/10.1680/geot.1975.25.1.31.
Indraratna, B., N. T. Ngo, C. Rujikiatkamjorn, and S. W. Sloan. 2015. “Coupled discrete element–finite difference method for analysing the load-deformation behaviour of a single stone column in soft soil.” Comput. Geotech. 63: 267–278. https://doi.org/10.1016/j.compgeo.2014.10.002.
Itasca Consulting Group. 2006. UDEC—universal distinct element code—Theory and background. Minneapolis: Itasca Consulting Group.
Madhav, M. R., and P. P. Vitkar. 1978. “Strip footing on weak clay stabilized with a granular trench or pile.” Can. Geotech. J. 15 (4): 605–609. https://doi.org/10.1139/t78-066.
Najjar, S. S. 2013. “A state-of-the-art review of stone/sand-column reinforced clay systems.” Geotech. Geol. Eng. 31 (2): 355–386. https://doi.org/10.1007/s10706-012-9603-5.
Priebe, H. 2005. “Design of vibro replacement.” Ground Eng. 38 (1): 25–27.
Sehn, A. L., and J. T. Blackburn. 2008. “Predicting performance of aggregate piers.” In Proc., 23rd Central Pennsylvania Geotechnical Conf., Hershey: Central Pennsylvania ASCE Geotechnical Group.
Sivakumar, V., D. K. N. M. Jeludine, A. Bell, D. T. Glynn, and P. Mackinnon. 2011. “The pressure distribution along stone columns in soft clay under consolidation and foundation loading.” Géotechnique 61 (7): 613–620. https://doi.org/10.1680/geot.9.P.086.
Tan, X., L. Feng, Z. Hu, and M. Zhao. 2020. “A DEM–FDM coupled numerical study on the deformation and failure process of the isolated stone column in soft soil.” Bull. Eng. Geol. Environ. 79: 1693–1705. https://doi.org/10.1007/s10064-019-01671-3.
Tan, X., H. Konietzky, and W. Chen. 2016. “Numerical simulation of heterogeneous rock using discrete element model based on digital image processing.” Rock Mech. Rock Eng. 49 (12): 4957–4964. https://doi.org/10.1007/s00603-016-1030-0.
Tan, X., H. Konietzky, T. Frühwirt, and D. Q. Dan. 2015. “Brazilian tests on transversely isotropic rocks: Laboratory testing and numerical simulations.” Rock Mech. Rock Eng. 48 (4): 1341–1351. https://doi.org/10.1007/s00603-014-0629-2.
Tan, X., and M. Zhao. 2018. “Deformation and failure behavior of the isolated single stone column with and without geosynthetic encasement.” In Proc., 2nd Int. Symp. on Asia Urban GeoEngineering, 547–559. Changsha, China: Hunan Univ.
Tan, X., M. Zhao, and W. Chen. 2018a. “Numerical simulation of a single stone column in soft clay using the discrete-element method.” Int. J. Geomech. 18 (12): 04018176. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001308.
Tan, X., M. Zhao, and Z. Zhu. 2018b. “Elastic properties calibration approach for discrete element method model based on Voronoi tessellation method.” Geotech. Geol. Eng. 37 (3): 2227–2236. https://doi.org/10.1007/s10706-018-0682-9.
Utili, S., T. Zhao, and G. T. Houlsby. 2015. “3D DEM investigation of granular column collapse: Evaluation of debris motion and its destructive power.” Eng. Geol. 186: 3–16. https://doi.org/10.1016/j.enggeo.2014.08.018.
Zhou, H., Y. Diao, G. Zheng, J. Han, and R. Jia. 2017. “Failure modes and bearing capacity of strip footings on soft ground reinforced by floating stone columns.” Acta Geotech. 12 (5): 1089–1103. https://doi.org/10.1007/s11440-017-0535-3.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 20 • Issue 8 • August 2020
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jul 27, 2019
Accepted: Mar 24, 2020
Published online: Jun 4, 2020
Published in print: Aug 1, 2020
Discussion open until: Nov 4, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.