Abstract
Three-dimensional finite-element analyses of the inclined pullout behavior of geogrids embedded in three types of anchors (run-out, I-type, and L-type) are presented in this paper. The soil behavior is represented by the elastic–perfectly plastic Mohr–Coulomb (MC) model and the geogrid behavior with linear-elastic plate elements. The geogrid is modeled using the geometrical and index properties of the geogrid used in model tests. The predicted results from the finite-element analyses are compared with the corresponding model test results. The peak pullout force values for different values of inclinations and types of anchors are predicted with reasonable accuracy by the present numerical model. However, the results show that the post-peak response for run-out and I-type anchors and the stiffness in the case of I-type and L-type anchors are not satisfactorily modeled.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdi, M. R., and A. R. Zandieh. 2014. “Experimental and numerical analysis of large scale pull out tests conducted on clays reinforced with geogrids encapsulated with coarse material.” Geotext. Geomembr. 42 (5): 494–504. https://doi.org/10.1016/j.geotexmem.2014.07.008.
ASTM. 2015. Standard test method for determining tensile properties of geogrids by the single or multi-rib tensile method. ASTM D6637. West Conshohocken, PA: ASTM.
Bhowmik, R. 2019. Inclined pullout behaviour of anchored geogrids used as veneer reinforcement in cover systems of landfills. New Delhi, India: Indian Institute of Technology Delhi.
Bhowmik, R., J. T. Shahu, and M. Datta. 2019a. “Experimental investigations on inclined pullout behaviour of geogrids anchored in trenches.” Geosynthetics Int. 26 (5): 515–524. https://doi.org/10.1680/jgein.19.00038.
Bhowmik, R., J. T. Shahu, and M. Datta. 2019b. “Effect of type of geosynthetic and sand on inclined pullout capacity of anchors.” Geotext. Geomembr. 47 (6): 767–779.
Bowles, J. E. 1997. Foundation analysis and design. Singapore: McGraw-Hill.
Brinkgreve, R. B. J., S. Kumarswamy, and W. M. Swolfs. 2015. Plaxis material models manual. Delft, Netherlands: Plaxis.
Chareyre, B., L. Briançon, and P. Villard. 2002. “Theoretical versus experimental modeling of the anchorage capacity of geotextiles in trenches.” Geosynthetics Int. 9 (2): 97–123. https://doi.org/10.1680/gein.9.0212.
Chawla, S., and J. T. Shahu. 2016. “Reinforcement and mud-pumping benefits of geosynthetics in railway tracks: Numerical analysis.” Geotext. Geomembr. 44 (3): 344–357. https://doi.org/10.1016/j.geotexmem.2016.01.006.
Gabr, M. A., and T. J. Hunter. 1994. “Stress–strain analysis of geogrid-supported liners over subsurface cavities.” Geotech. Geol. Eng. 12 (2): 65–86. https://doi.org/10.1007/BF00429767.
Hullings, D. E., and L. J. Sansone. 1998. “Design concerns and performance of geomembrane anchor trenches.” Geotext. Geomembr. 15 (4–6): 403–417. https://doi.org/10.1016/S0266-1144(97)00018-6.
Hussein, M. G., and M. A. Meguid. 2016. “A three-dimensional finite element approach for modeling biaxial geogrid with application to geogrid-reinforced soils.” Geotext. Geomembr. 44 (3): 295–307. https://doi.org/10.1016/j.geotexmem.2015.12.004.
Janbu, N. 1963. “Soil compressibility as determined by oedometer and triaxial tests.” In Vol. 1 of Proc., European Conf. on Soil Mechanics and Foundation Engineering, 19–25.
Khedkar, M. S., and J. N. Mandal. 2009. “Pullout behaviour of cellular reinforcements.” Geotext. Geomembr. 27 (4): 262–271. https://doi.org/10.1016/j.geotexmem.2008.12.003.
Koerner, R. M. 2005. Designing with geosynthetics. Upper Saddle River, NJ: Prentice-Hall.
Koerner, R. M., and M. H. Wayne. 1991. “Geomembrane anchorage behavior using a large-scale pullout apparatus.” In Geomembranes- identification and performance testing, edited by A. Rollin and J.-M. Rigo, 160–171. London: Chapman & Hall.
Lajevardi, S. H., C. Silvani, D. Dias, L. Briançon, and P. Villard. 2015. “Geosynthetics anchorage with wrap around: Experimental and numerical studies.” Geosynthetics Int. 22 (4): 273–287. https://doi.org/10.1680/gein.15.00010.
Lees, A. 2016. Geotechnical finite element analysis: A practical guide. London: ICE.
Madhav, M. R., and B. Umashankar. 2003. “Analysis of inextensible sheet reinforcement subject to transverse displacement/force: Linear subgrade response.” Geotext. Geomembr. 21 (2): 69–84. https://doi.org/10.1016/S0266-1144(03)00002-5.
Moraci, N., and P. Recalcati. 2006. “Factors affecting the pullout behaviour of extruded geogrids embedded in a compacted granular soil.” Geotext. Geomembr. 24 (4): 220–242. https://doi.org/10.1016/j.geotexmem.2006.03.001.
Mosallanezhad, M., S. H. S. Taghavi, N. Hataf, and M. C. Alfaro. 2016. “Experimental and numerical studies of the performance of the new reinforcement system under pull-out conditions.” Geotext. Geomembr. 44 (1): 70–80. https://doi.org/10.1016/j.geotexmem.2015.07.006.
Patra, S., and J. T. Shahu. 2012. “Pasternak model for oblique pullout of inextensible reinforcement.” J. Geotech. Geoenviron. Eng. 138 (12): 1503–1513. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000720.
Patra, S., and J. T. Shahu. 2015. “Behaviour of extensible reinforcement resting on non-linear Pasternak subgrade subjected to oblique pull.” Géotechnique 65 (9): 770–779. https://doi.org/10.1680/geot.14.P.233.
Qian, X., R. M. Koerner, and D. H. Gray. 2002. Geotechnical aspects of landfill design and construction. Upper Saddle River, NJ: Prentice-Hall.
Rajesh, S., and B. V. S. Viswanadham. 2015. “Numerical simulation of geogrid-reinforced soil barriers subjected to differential settlements.” Int. J. Geomech. 15 (4): 04014062. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000405.
Shahu, J. T. 2007. “Pullout response of inextensible sheet reinforcement subject to oblique end force.” J. Geotech. Geoenviron. Eng. 133 (11): 1440–1448. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:11(1440).
Shahu, J. T., and S. Hayashi. 2009. “Analysis of extensible reinforcement subject to oblique pull.” J. Geotech. Geoenviron. Eng. 135 (5): 623–634. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000019.
Shahu, J. T., and Y. R. Reddy. 2011. “Clayey soil reinforced with stone column group: Model tests and analyses.” J. Geotech. Geoenviron. Eng. 137 (12): 1265–1274. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000552.
Sugimoto, M., and A. M. N. Alagiyawanna. 2003. “Pullout behavior of geogrid by test and numerical analysis.” J. Geotech. Geoenviron. Eng. 129 (4): 361–371. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:4(361).
Villard, P., and B. Chareyre. 2004. “Design methods for geosynthetic anchor trenches on the basis of true scale experiments and discrete element modelling.” Can. Geotech. J. 41 (6): 1193–1205. https://doi.org/10.1139/t04-063.
Yang, X. 2012. “An assessment of the geometry effect of geosynthetics for base course reinforcements.” Int. J. Transp. Sci. Technol. 1 (3): 247–257. https://doi.org/10.1260/2046-0430.1.3.247.
Yetimoglu, T., J. T. H. Wu, and A. Saglamer. 1994. “Bearing capacity of rectangular footings on geogrid-reinforced sand.” J. Geotech. Eng. 120 (12): 2083–2099. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:12(2083).
Yu, Y., I. P. Damians, and R. J. Bathurst. 2015. “Influence of choice of FLAC and PLAXIS interface models on reinforced soil–structure interactions.” Comput. Geotech. 65: 164–174. https://doi.org/10.1016/j.compgeo.2014.12.009.
Zhuang, Y., and E. Ellis. 2016. “Finite-element analysis of a piled embankment with reinforcement and subsoil.” Géotechnique 66 (7): 596–601. https://doi.org/10.1680/jgeot.15.P.139.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Mar 21, 2019
Accepted: Mar 24, 2020
Published online: Jun 4, 2020
Published in print: Aug 1, 2020
Discussion open until: Nov 4, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.