Strength Reduction Method for Slope Stability Analysis Based on a Dual Factoring Strategy
Publication: International Journal of Geomechanics
Volume 18, Issue 10
Abstract
A shear strength reduction method based on a dual factoring strategy was considered in which cohesion and the coefficient of internal friction were each reduced by a different factor. By using a strength reduction path introduced in the present study, series of numerical tests were conducted to bring the slope into different states of critical equilibrium through which definitions of the factor of safety and the strength reduction path adopted in some preceding studies were evaluated. This strategy was found to be more conservative than the traditional shear strength reduction method. Generally, the factor of safety defined in the limit equilibrium method should be adopted, and the most probable strength reduction path under the principle of the shortest path could be an effective approach to obtain the minimum value of the factor of safety directly. To implement this strategy, a mathematical model based on limit analysis solutions is proposed to describe the shear strength components of a slope under different critical equilibrium states, and a general computational procedure is outlined.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the editor and three anonymous reviewers for their insightful comments, which greatly improved the manuscript. The research support received from Beijing Training Project for the Leading Talent in S & T (Z151100000315014) is gratefully acknowledged.
References
Abramson, L. W., T. S. Lee, S. Sharma, and G. M. Boyce. 2002. Slope stability and stabilization methods. 2nd ed. New York: John Wiley & Sons.
Bai, B., W. Yuan, and X.-c. Li. 2014. “A new double reduction method for slope stability analysis.” J. Cent. South Univ. 21 (3): 1158–1164. https://doi.org/10.1007/s11771-014-2049-6.
Baker, R., and D. Leshchinsky. 2001. “Spatial distribution of safety factors.” J. Geotech. Geoenviron. Eng. 127 (2): 135–145. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:2(135).
Chen, W.-F. 1975. Limit analysis and soil plasticity. Amsterdam, Netherlands: Elsevier Scientific.
Cheng, Y. M., T. Lansivaara, and W. B. Wei. 2007. “Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods.” Comput. Geotech. 34 (3): 137–150. https://doi.org/10.1016/j.compgeo.2006.10.011.
Davis, R. O., and A. P. Selvadurai. 2002. Plasticity and geomechanics. Cambridge, UK: Cambridge University Press.
Dawson, E. M., W. H. Roth, and A. Drescher. 1999. “Slope stability analysis by strength reduction.” Géotechnique 49 (6): 835–840. https://doi.org/10.1680/geot.1999.49.6.835.
Fredlund, D. G., and J. Krahn. 1977. “Comparison of slope stability methods of analysis.” Can. Geotech. J. 14 (3): 429–439. https://doi.org/10.1139/t77-045.
Griffiths, D. V., and P. A. Lane. 1999. “Slope stability analysis by finite elements.” Géotechnique 49 (3): 387–403. https://doi.org/10.1680/geot.1999.49.3.387.
Hajiabdolmajid, V., P. K. Kaiser, and C. D. Martin. 2002. “Modelling brittle failure of rock.” Int. J. Rock Mech. Min. 39 (6): 731–741. https://doi.org/10.1016/S1365-1609(02)00051-5.
Isakov, A., and Y. Moryachkov. 2014. “Estimation of slope stability using two-parameter criterion of stability.” Int. J. Geomech. 14 (3): 06014004. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000326.
Itasca Consulting Group. 2008. PFC2D, particle flow code in 2 dimensions user’s guide. Minneapolis: Itasca Consulting Group.
Itasca Consulting Group. 2013. FLAC3D, fast Lagrangian analysis of continua in 3 dimensions user’s guide. Minneapolis: Itasca Consulting Group.
Lambe, T. W., and R. V. Whitman. 1969. Soil mechanics. New York: John Wiley & Sons.
Matsui, T., and K.-C. San. 1992. “Finite element slope stability analysis by shear strength reduction technique.” Soils Found. 32 (1): 59–70. https://doi.org/10.3208/sandf1972.32.59.
Pantelidis, L., and D. V. Griffiths. 2012. “Stability assessment of slopes using different factoring strategies.” J. Geotech. Geoenviron. Eng. 138 (9): 1158–1160. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000678.
Read, H. E., and G. A. Hegemier. 1984. “Strain softening of rock, soil and concrete—A review article.” Mech. Mater. 3 (4): 271–294. https://doi.org/10.1016/0167-6636(84)90028-0.
Tang, F., and Y. R. Zheng. 2007. “Analysis on safety reserve of slope with two strength reduction factor.” [In Chinese.] J. Chongqing Jiaotong Univ. Nat. Sci. 20 (1): 95–100.
Tang, X. S., Y. R. Zheng, and H. M. Tang. 2013. “Numerical analysis on the evolutionary features of deformation and failure modes of slopes.” [In Chinese.] J. Chongqing Univ. 36 (10): 101–113.
Taylor, D. W. 1937. “Stability of earth slopes.” J. Boston Soc. Civ. Eng. 24 (3): 197–246.
Wan, S.-s., T.-k. Nian, J.-c. Jiang, and M.-t. Luan. 2010. “Discussion on several issues in slope stability analysis based on shear strength reduction finite element methods (SSR-FEM).” [In Chinese.] Rock Soil Mech. 31 (7): 2283–2288.
Xue, H., F. Dang, X. Yin, W. Ding, and C. Yang. 2016. “Nonproportional correlative reduction finite element method for slope strength parameters.” Math. Prob. Eng. 2016: 1–10. https://doi.org/10.1155/2016/2725354.
Yuan, W., B. Bai, X.-c. Li, and H.-b. Wang. 2013. “A strength reduction method based on double reduction parameters and its application.” J. Cent. South Univ. 20 (9): 2555–2562. https://doi.org/10.1007/s11771-013-1768-4.
Yuan, W., X. C. Li, W. Wang, B. Bai, Q. Z. Wang, and X. J. Chen. 2016. “Study on strength reduction method based on double reduction parameters.” [In Chinese.] Rock Soil Mech. 20 (9): 2222–2230.
Zhao, L., J.-Y. Cao, G. Tang, Z.-B. Wang, and H.-H. Tan. 2014. “Discussion on slope stability analysis with double strength reduction technique.” [In Chinese.] Rock Soil Mech. 35 (10): 2977–2984.
Zheng, H., G. Sun, and D. Liu. 2009. “A practical procedure for searching critical slip surfaces of slopes based on the strength reduction technique.” Comput. Geotech. 36: 1–5. https://doi.org/10.1016/j.compgeo.2008.06.002.
Zheng, H., L. G. Tham, and D. Liu. 2006. “On two definitions of the factor of safety commonly used in the finite element slope stability analysis.” Comput. Geotech. 33 (3): 188–195. https://doi.org/10.1016/j.compgeo.2006.03.007.
Zienkiewicz, O. C., C. Humpheson, and R. W. Lewis. 1975. “Associated and non-associated visco-plasticity and plasticity in soil mechanics.” Géotechnique 25 (4): 671–689. https://doi.org/10.1680/geot.1975.25.4.671.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Jul 31, 2017
Accepted: Apr 10, 2018
Published online: Jul 19, 2018
Published in print: Oct 1, 2018
Discussion open until: Dec 19, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.