Elastoplastic Model for Transversely Isotropic Rocks
Publication: International Journal of Geomechanics
Volume 18, Issue 2
Abstract
The structure of the layered rocks is characterized by oriented bedding planes, resulting in transverse isotropy in deformation and strength. An elastoplastic constitutive model was proposed for transversely isotropic (TI) rock in this study. In the model, the generalized Hooke’s law was adopted for the elastic behavior. For the plastic behavior, the yield criterion and plastic potential are formulated as functions of the generalized octahedral shear stress and the first invariant of stress tensor. A nonassociated flow rule and a stress-dependent hardening rule were adopted in the model. The plastic model can be simplified to the Drucker-Prager model for isotropic rocks. A methodology for the determination of model parameters was developed. The parameters can be determined by combining triaxial compression tests with torsion tests on specimens with different bedding directions. The constraint on plastic parameters was theoretically identified. The proposed model and the parameter determination methodology were applied to modeling the TI elastoplastic property of carbonaceous slate in triaxial compression. The results show that the model proposed in this study can well describe the transverse isotropic elastoplastic property of the rock, and the parameter determination methodology is simple and effective.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support from the National Natural Science Foundation of China (grant numbers 51579141 and 51309145), and the Open Research Fund of the State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, under Grant No. Z011005.
References
Amadei, B. (1996). “Importance of anisotropy when estimating and measuring in situ stresses in rock.” Int. J. Rock Mech. Min. Sci. Geomech., 33(3), 293–325.
Anandarajah, A. (2008). “Multi-mechanism anisotropic model for granular materials.” Int. J. Plast., 24(5), 804–846.
Barton, N., and Quadros, E. (2015). “Anisotropy is everywhere, to see, to measure, and to model.” Rock Mech. Rock Eng., 48(4), 1323–1339.
Bobet, A. (2011). “Lined circular tunnels in elastic transversely anisotropic rock at depth.” Rock Mech. Rock Eng., 44(2), 149–167.
Chang, J., Chu, X., and Xu, Y. (2015). “Finite-element analysis of failure in transversely isotropic geomaterials.” Int J. Geomech, 04014096.
Chou, Y.-C., and Chen, C.-S. (2008). “Determining elastic constants of transversely isotropic rocks using Brazilian test and iterative procedure.” Int. J. Numer. Anal. Methods Geomech., 32(3), 219–234.
Ding, H., Chen, W., and Zhang, L. (2006). Elasticity of transversely isotropic materials, Springer Science & Business Media, Dordrecht, Netherlands.
Exadaktylos, G. E. (2001). “On the constraints and relations of elastic constants of transversely isotropic geomaterials.” Int. J. Rock Mech. Min. Sci., 38(7), 941–956.
Gao, C. Y., Xu, J., Li, Z.-H., and Deng, J. H. (2011). “Experimental study of anisotropically mechanical characteristics of sandy slate in Xuefeng mountain tunnel.” Rock Soil Mech., 32(5), 1360–1364 (in Chinese).
Gautam, R., and Wong, R. C. K. (2006). “Transversely isotropic stiffness parameters and their measurement in Colorado shale.” Can. Geotech. J., 43(12), 1290–1305.
Hakala, M., Kuula, H., and Hudson, J. A. (2007). “Estimating the transversely isotropic elastic intact rock properties for in situ stress measurement data reduction: A case study of the Olkiluoto mica gneiss, Finland.” Int. J. Rock Mech. Min. Sci., 44(1), 14–46.
Hefny, A. M., and Lo, K. Y. (1999). “Analytical solutions for stresses and displacements around tunnels driven in cross-anisotropic rocks.” Int. J. Numer. Anal. Methods Geomech., 23(2), 161–177.
Hill, R. (1950). The mathematical theory of plasticity, Clarendon Press, Oxford, U.K.
Huang, S., and Khan, A. S. (1991). “An analysis of finite elastic-plastic deformation under biaxial compression.” Int. J. Plast., 7(3), 219–234.
Kamrin, K. (2010). “Nonlinear elasto-plastic model for dense granular flow.” Int. J. Plast., 26(2), 167–188.
Khan, A. S., Xiang, Y., and Huang, S. (1991). “Behavior of Berea sandstone under confining pressure part I: Yield and failure surfaces, and nonlinear elastic response.” Int. J. Plast., 7(6), 607–624.
Khan, A. S., Xiang, Y., and Huang, S. (1992). “Behavior of Berea sandstone under confining pressure part II: Elastic-plastic response.” Int. J. Plast., 8(3), 209–220.
Lai, Y., Jin, L., and Chang, X. (2009). “Yield criterion and elasto-plastic damage constitutive model for frozen sandy soil.” Int. J. Plast., 25(6), 1177–1205.
Liu, Y., Fu, H., Wu, Y., Rao, J., Yin, Q., and Yuan, W. (2013). “Experimental study of elastic parameters and compressive strength for transversely isotropic rocks.” J. Cent. South Univ., 44(8), 3398–3404.
Long, N. M. A. N., Khaldjigitov, A. A., and Adambaev, U. (2013). “On the constitutive relations for isotropic and transversely isotropic materials.” Appl. Math. Modell., 37(14–15), 7726–7740.
Muraleetharan, K. K., Liu, C., Wei, C., Kibbey, T. C., and Chen, L. (2009). “An elastoplatic framework for coupling hydraulic and mechanical behavior of unsaturated soils.” Int. J. Plast., 25(3), 473–490.
Nixon, S. A., and Chandler, H. W. (1999). “On the elasticity and plasticity of dilatant granular materials.” J. Mech. Phys. Solids, 47(6), 1397–1408.
Shao, J. F., and Henry, J. P. (1991). “Development of an elastoplastic model for porous rock.” Int. J. Plast., 7(1–2), 1–13.
Shen, W. Q., and Shao, J. F. (2016). “An incremental micro-macro model for porous geomaterials with double porosity and inclusion.” Int. J. Plast., 83(Aug), 37–54.
Shi, X., Yang, X., Meng, Y., and Gao, L. (2016). “An anisotropic strength model for layered rocks considering planes of weakness.” Rock Mech. Rock Eng., 49(9), 3783–3792.
Simanjuntak, T. D. Y. F., Marence, M., Schleiss, A. J., and Mynett, A. E. (2016). “The interplay of in situ stress ratio and transverse isotropy in the rock mass on prestressed concrete-lined pressure tunnels.” Rock Mech. Rock Eng., 49(11), 1–22.
SIMULIA. (2006). Abaqus documentation, version 6.6, SIMULIA, Providence, RI.
Singh, M., Samadhiya, N. K., Kumar, A., and Singh, B. (2015). “A nonlinear criterion for triaxial strength of inherently anisotropic rocks.” Rock Mech. Rock Eng., 48(4), 1387–1405.
Talesnick, M. L., Lee, M. Y., and Haimson, B. C. (1995). “On the determination of elastic material parameters of transverse isotropic rocks from a single test specimen.” Rock Mech. Rock Eng., 28(1), 17–35.
Tien, Y. M., Kuo, M. C., and Juang, C. H. (2006). “An experimental investigation of the failure mechanism of simulated transversely isotropic rocks.” Int. J. Rock Mech. Min. Sci., 43(8), 1163–1181.
Tsutsumi, S., and Hashiguchi, K. (2005). “General non-proportional loading behavior of soils.” Int. J. Plast., 21(10), 1941–1969.
Vorobiev, O. (2008). “Generic strength model for dry jointed rock masses.” Int. J. Plast., 24(12), 2221–2247.
Vu, T. M., Sulem, J., Subrin, D., and Monin, N. (2013a). “Semi-analytical solution for stresses and displacements in a tunnel excavated in transversely isotropic formation with non-linear behavior.” Rock Mech. Rock Eng., 46(2), 213–229.
Vu, T. M., Sulem, J., Subrin, D., Monin, N., and Lascols, J. (2013b). “Anisotropic closure in squeezing rocks: The example of Saint-Martin-la-Port Access Gallery.” Rock Mech. Rock Eng., 46(2), 231–246.
Wang, Y., Ding, W., Jia, S., and Zou, C. (2014). “Anisotropic model of layered rock mass considering characteristics of structural interface.” J. Highway Transp. Res. Dev., 31(10), 85–92 (in Chinese).
Wang, Z., and Wong, R. (2016). “Strain-dependent and stress-dependent creep model for a till subject to triaxial compression.” Int J. Geomech, 04016027.
Wang, Z. and Wong, R. (2017). “Strain-dependent creep behavior of Athabasca oil sand in triaxial compression.” Int J. Geomech., 04015084.
Xu, L., Ren, Q., Du, X., and Ye, Z. (2010). “An anisotropic elastoplastic constitutive model for layered rock masses and its implementation.” Chinese J. Undergr. Sp. Eng., 6(4), 763–769 (in Chinese).
Yin, Z. Y., Chang, C. S., Hicher, P. Y., and Karstunen, M. (2009). “Micromechanical analysis of kinematic hardening in natural clay.” Int J. Plast., 25(8), 1413–1435.
Yin, Z. Y., Chang, C. S., Karstunen, M., and Hicher, P. Y. (2010). “An anisotropic elastic–viscoplastic model for soft clays.” Int. J. Solids Struct., 47(5), 665–677.
Zhang, Z., and Sun, Y. (2011). “Analytical solution for a deep tunnel with arbitrary cross section in a transversely isotropic rock mass.” Int. J. Rock Mech. Min. Sci., 48(8), 1359–1363.
Zheng, Y., and Kong, L. (2010). Geotechnical plastic mechanics, China Architecture Building Press, Beijing (in Chinese).
Zhu, Q. Z., Shao, J. F., and Mainguy, M. (2010). “A micromechanics-based elastoplastic damage model for granular materials at low confining pressure.” Int J. Plast., 26(4), 586–602.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Feb 1, 2017
Accepted: Sep 6, 2017
Published online: Dec 6, 2017
Published in print: Feb 1, 2018
Discussion open until: May 6, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.