Revisiting the Calibration Philosophy of Constitutive Models in Geomechanics
Publication: International Journal of Geomechanics
Volume 17, Issue 8
Abstract
Conventional laboratory tests in geomechanics are inherently designed to create a uniform stress–strain field whereby relative homogeneity in data prevails at the expense of information diversity. The one-element convenience using stress homogeneity lends itself well to constitutive model calibration. From a mathematical standpoint, this approach potentially promotes uncertainty and error propagation. More recently, there has been a growing effort to utilize all data of conventional tests, including the effect of end restraints, to improve model calibration. This conceptual study revisits the notion of constitutive model calibration holding the perspective of inverse problems. For calibration purposes, nonconventional loading and complex boundary conditions were deemed to create a rich (nonuniform) strain–stress field. In this study, flexure excitation was investigated as a plausible test configuration in experimental geomechanics. An attempt was made to gauge the merits of flexural loading of a cylindrical soil specimen in providing independent data (information-rich test). The proposed test configuration was experimentally conducted and numerically optimized for assessment of model calibration.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abaqus 6.8 [Computer program]. SIMULIA, Pawtucket, RI.
Baldi, G., and Nova, R. (1984). “Membrane penetration effects in triaxial testing.” J. Geotech. Engrg., 403–420.
Bayoumi, A. (2006). “New laboratory test procedure for the enhanced calibration of constitutive mode.” Ph.D. thesis, Georgia Institute of Technology, Atlanta.
Chen, C., and Zhang, J. (2013). “Constitutive modeling of loose sands under various stress paths.” Int. J. Geomech., 1–8.
Dally, J. W., Riley, W. F., and McConnell, K. (1993). Instrumentation for engineering measurements, 2nd Ed., John Wiley & Sons, New York.
Desai, C. S. (2001). Mechanics of materials and interfaces: The disturbed state concept, CRC, Boca Raton, FL.
Desai, C. S., and Chen, J. Y. (2006). “Parameter optimization and sensitivity analysis for disturbed state constitutive model.” Int. J. Geomech., 75–88.
Dey, A., and Basudhar, P. (2012). “Estimation of Burger model parameters using inverse formulation.” Int. J. Geotech. Eng., 6(3), 261–274.
Fu, Q., Hashash, Y. M. A., Jung, S., and Ghaboussi, J. (2007). “Integration of laboratory testing and constitutive modeling of soils.” Comput. Geotech., 34(5), 330–345.
Ghaboussi, J., Pecknold, D. A., Zhang, M., and Haj-ali, R. M. (1998). “Autoprogressive training of neural network constitutive models.” Int. J. Numer. Methods Eng., 42(1), 105–126.
Hashash, Y. M. A., Fu, Q., Ghaboussi, J., Lade, P. V., and Saucier, C. (2009a). “Inverse analysis-based interpretation of sand behavior from triaxial compression tests subjected to full end restraint.” Can. Geotech., 1(46), 768–791.
Hashash, Y. M. A., Jung, S., Fu, Q., and Ghaboussi, J. (2009b). “Extracting inelastic metal behaviour through inverse analysis: A shift in focus from material models to material behaviour.” Inverse Prob. Sci. Eng., 17(1), 35–50.
Jefferies, M., and Been, K. (2015). Soil liquefaction: A critical state approach, 2nd Ed., CRC, Boca Raton, FL.
Jefferys, W. H., and Berger, J. O. (1992). “Ockham’s razor and Bayesian analysis.” Am. Sci., 80(1), 64–72.
Jha, S. J., Suzuki, K., and Desai, C. S. (2009). “Modelling and uncertainty analysis of softening behaviour of sand using disturbed state constitutive model.” Aust. Geomech. J., 44(3), 81–90.
Knabe, T., Schweiger, H. F., and Schanz, T. (2012). “Calibration of constitutive parameters by inverse analysis for a geotechnical boundary problem.” Can. Geotech. J., 49(2), 170–183.
Kolymbas, D. (2015). “Introduction to barodesy.” Géotechnique, 65(1), 52–65.
Lade, P. V. (2005). “Overview of constitutive models for soils.” Geo-Frontiers 2005: Calibration of Constitutive Models, Geotechnical special publication 139, J. A. Yamamuro and V. N. Kaliakin, eds., ASCE, Reston, VA, 2493–2526.
Lambe, T. W., and Whitman, R. V. (1969). Soil mechanics, John Wiley & Sons, New York.
Marquardt, D. (1963). “An algorithm for least-squares estimation of nonlinear parameters.” J. Soc. Ind. Appl. Math., 11(2), 431–441.
Medina-Cetina, Z., and Rechenmacher, A. (2010). “Influence of boundary conditions, specimen geometry and material heterogeneity on model calibration from triaxial tests.” Int. J. Numer. Anal. Methods Geomech., 34(6), 627–643.
Pichler, B., Lackner, R., and Mang, H. A. (2003). “Back analysis of model parameters in geotechnical engineering by means of soft computing.” Int. J. Numer. Methods Eng., 57, 1943–1978.
Rechenmacher, A., and Medina-Cetina, Z. (2003). “Digital-imaging based measurement of deformed shapes of axisymmetric soil specimens.” Proc., 16th ASCE Engineering Mechanics Conf., ASCE, Reston, VA.
Rechenmacher, A., and Medina-Cetina, Z. (2007). “Calibration of soil constitutive models with spatially varying parameters.” J. Geotech. Geoenviron. Eng., 1567–1576.
Roscoe, K. H., and Burland, J. B. (1968). “On the generalised stress–strain behaviour of ‘wet’ clay.” Engineering plasticity, J. Heyman and F. A. Leckie, eds., Cambridge University Press, Cambridge, U.K., 535–609.
Santamarina, J. C., and Cho, G. C. (2001). “Determination of critical state parameters in sandy soils.” Geotech. Test. J., 24(2), 185–192.
Santamarina, J. C., and Fratta, D. (2005). Discrete signals and inverse problems: An introduction for engineers and scientists, John Wiley and Sons, Chichester, U.K., 350.
Savic, V., Hector, L. G., and Fekete, J. R. (2010). “Digital image correlation study of plastic deformation and fracture in fully martensitic steels.” Exp. Mech., 50(1), 99–110.
Schofield, A. N., and Wroth, C. P. (1968). Critical state soil mechanics, McGraw-Hill, New York, 310.
Shin, H. S., and Pande, G. N. (2003). “Identification of elastic constants for orthotropic materials from a structural test.” Comput. Geotech. 30(7), 571–577.
Sidarta, D. E., and Ghaboussi, J. (1998). “Constitutive modeling of geomaterials from non-uniform material tests.” Comput. Geotech., 22(1), 53–71.
Song, A. (2012). “Deformation analysis of sand specimens using 3D digital image correlation for the calibration of an elasto-plastic model.” Ph.D. thesis, Texas A&M Univ., College Station, TX, 115.
Wood, D. M. (1990). Soil behaviour and critical state soil mechanics, Cambridge University Press, Cambridge, U.K., 462.
Wood, D. M. (2002). “Constitutive cladistics: The progeny of critical state soil mechanics.” Proc., Workshop on Constitutive and Centrifuge Modelling, Swets & Zeitlinger, Lisse, Netherlands.
Wood, D. M. (2004). Geotechnical modelling, Spon, London, 488.
Yu, H. S. (1998). “CASM: A unified state parameter model for clay and sand.” Int. J. Numer. Anal. Methods Geomech., 621–653.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Aug 2, 2016
Accepted: Dec 2, 2016
Published online: Feb 22, 2017
Discussion open until: Jul 22, 2017
Published in print: Aug 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.