Critical State for Anisotropic Granular Materials: A Discrete Element Perspective
Publication: International Journal of Geomechanics
Volume 17, Issue 2
Abstract
Critical-state failure is a salient feature for particular materials, such as granular media and soils, whereas the critical-state theory (CST) is widely accepted for understanding and interpreting the behavior of a range of materials under complex loading conditions. In elastoplastic soil modeling, the critical state is also a favorable reference state for capturing and simulating the soils’ responses, and thus many constitutive models have been developed within the CST framework. Notwithstanding this, the uniqueness of the critical state has evoked increasing debate for many years and remains an unresolved issue. The central difficulty lies in how to integrate fabric anisotropy into the delineation of the critical-state failure. Motivated by the recent development of the anisotropic critical-state theory, this paper presents a discrete element investigation of the critical-state behavior of anisotropic granular materials. Samples with different degrees of initial fabric anisotropy are sheared to the critical state under both triaxial compression and extension conditions. Based on a series of numerical simulations with varying densities and confining pressures, a unique critical-state line can be approximately obtained in the e–p′ plane and is found to be independent of initial fabrics and shearing modes or Lode angles. The fabric anisotropy and its evolution during the loading process can be quantified by a deviatoric fabric tensor defined based on the statistical distribution of the contact normal vectors within the granular assemblies. The most prominent observation is that the direction of the fabric tensor is codirectional with the stress at the critical state, whereas its norm has a unique value pertinent to the shear mode or Lode angle.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was funded by the Natural Science Foundation of China (Grant Nos. 51322809 and 51578499), National Key Basic Research Program of China (Grant No. 2015CB057801), a project of Zhejiang Education Department (Grant No. N20110091), and International Science and Technology Cooperation Program of China (Grant No. 2015DFE72830). Their support is gratefully acknowledged.
References
Bandini, V., and Coop, M. R. (2011). “The influence of particle breakage on the location of the critical state line of sands.” Soils Found., 51(4), 591–600.
Been, K., and Jefferies, M. G. (1985). “A state parameter for sands.” Géotechnique, 35(2), 99–112.
Been, K., Jefferies, M. G., and Hachey, J. (1991). “The critical state of sands.” Géotechnique, 41(3), 365–381.
Chapuis, R. P., and Soulié, M. (1981). “Internal structure and mechanical behavior of granulars.” Mechanics of structured media, Elsevier, Amsterdam, The Netherlands, 341–355.
Chaudhary, S. K., Kuwano, J., Hashimoto, S., Hayano, Y., and Nakamura, Y. (2002). “Effects of initial fabric on cyclic deformation characteristics of sand.” Soils Found., 42(1), 147–157.
Chen, Y. C., and Chuang, J. C. (2001). “Effects of fabric on steady state and liquefaction resistance.” Proc., Eleventh Int. Offshore and Polar Engineering Conf., International Society of Offshore and Polar Engineers), Danvers, MA, 524–529.
Cheung, G., and O'Sullivan, C. (2008). “Effective simulation of flexible lateral boundaries in two-and three-dimensional DEM simulations.” Particuology, 6(6), 483–500.
Chu, J. (1995). “An experimental examination of the critical state and other similar concepts for granular soils.” Can. Geotech. J., 32(6), 1065–1075.
Cundall, P. A., and Strack, O. D. (1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
Dafalias, Y. F., Papadimitriou, A. G., and Li, X. S. (2004). “Sand plasticity model accounting for inherent fabric anisotropy.” J. Eng. Mech., 1319–1333.
Fonseca, J., O'Sullivan, C., Coop, M. R., and Lee, P. D. (2013). “Quantifying the evolution of soil fabric during shearing using directional parameters.” Géotechnique, 63(6), 487–499.
Fu, P., and Dafalias, Y. F. (2011). “Study of anisotropic shear strength of granular materials using DEM simulation.” Int. J. Numer. Anal. Methods Geomech., 35(10), 1098–1126.
Fu, P., and Dafalias, Y. F. (2015). “Relationship between void-and contact normal-based fabric tensors for 2D idealized granular materials.” Int. J. Solids Struct., 63, 68–81.
Gao, Z., Zhao, J., Li, X. S., and Dafalias, Y. F. (2014). “A critical state sand plasticity model accounting for fabric evolution.” Int. J. Numer. Anal. Methods Geomech., 38(4), 370–390.
Gens, A., and Potts, D. M. (1988). “Critical state models in computational geomechanics.” Eng. Comput., 5(3), 178–197.
Guo, N., and Zhao, J. (2013). “The signature of shear-induced anisotropy in granular media.” Comput. Geotech., 47, 1–15.
Huang, X., Hanley, K. J., O’Sullivan, C., Kwok, C. Y., and Wadee, M. A. (2014). “DEM analysis of the influence of the intermediate stress ratio on the critical-state behaviour of granular materials.” Granular Matter, 16(5), 641–655.
Huang, Z. Y., Yang, Z. X., and Wang, Z. Y. (2008). “Discrete element modeling of sand behavior in a biaxial shear test.” J. Zhejiang Univ. Sci. A, 9(9), 1176–1183.
Ibrahim, A. A., and Kagawa, T. (1991). “Microscopic measurement of sand fabric from cyclic tests causing liquefaction.” Geotech. Test. J., 14(4), 371–382.
Imam, S. R., Morgenstern, N. R., Robertson, P. K., and Chan, D. H. (2005). “A critical-state constitutive model for liquefiable sand.” Can. Geotech. J., 42(3), 830–855.
Ishihara, K. (1996). Soil behavior in earthquake geotechnics, Oxford Univ. Press, Oxford, U.K.
Jefferies, M. G. (1993). “Nor-Sand: A simle critical state model for sand.” Géotechnique, 43(1), 91–103.
Kuo, C. Y., Frost, J. D., and Chameau, J. L. A. (1998). “Image analysis determination of stereology based fabric tensors.” Géotechnique, 48(4), 515–525.
Lade, P. V. (2005). “Overview of constitutive models for soils.” Proc., Calibration Constitutive Models (GSP 139), ASCE, Reston, VA, 1–34.
Lade, P. V., and Duncan, J. M. (1975). “Elastoplastic stress-strain theory for cohesionless soil.”J. Geotech. Engrg. Div., 101(10), 1037–1053.
Li, X. (2006). “Micro-scale investigation on the quasi-static behavior of granular material.” Ph.D. dissertation, Hong Kong Univ. of Science and Technology, Hong Kong.
Li, X., and Yu, H. S. (2010). “Numerical investigation of granular material behaviour under rotational shear.” Géotechnique, 60(5), 381–394.
Li, X., Yu, H. S., and Li, X. S. (2013). A virtual experiment technique on the elementary behaviour of granular materials with discrete element method.” Int. J. Numer.d Anal. Methods Geomech., 37(1), 75–96.
Li, X. S. (2002). “A sand model with state-dapendent dilatancy.” Géotechnique, 52(3), 173–186.
Li, X. S., and Dafalias, Y. F. (2000). “Dilatancy for cohesionless soils.” Géotechnique, 50(4), 449–460.
Li, X. S., and Dafalias, Y. F. (2002). “Constitutive modeling of inherently anisotropic sand behavior.” J. Geotech. Geoenviron. Eng., 868–880.
Li, X. S., and Dafalias, Y. F. (2012). “Anisotropic critical state theory: Role of fabric.” J. Eng. Mech., 263–275.
Li, X. S., and Dafalias, Y. F. (2015). “Dissipation consistent fabric tensor definition from DEM to continuum for granular media.” J. Mech. Phys. Solids, 78, 141–153.
Li, X. S., and Wang, Y. (1998). “Linear representation of steady-state line for sand.” J. Geotech. Geoenviron. Eng., 1215–1217.
Miura, S., and Toki, S. (1982). “A sample preparation method and its effect on static and cyclic deformation-strength properties of sand.” Soils Found., 22(1), 61–77.
Mooney, M. A., Finno, R. J., and Viggiani, M. G. (1998). “A unique critical state for sand?.” J. Geotech. Geoenviron. Eng., 1100–1108.
Mróz, Z., Boukpeti, N., and Drescher, A. (2003). “Constitutive model for static liquefaction.” Int. J. Geomech., 133–144.
Nakata, Y., Hyodo, M., Murata, H., and Yasufuku, N. (1998). “Flow deformation of sands subjected to principal stress rotation.” Soils Found., 38(2), 115–128.
Ng, T. T. (2009). “Discrete element method simulations of the critical state of a granular material.” Int. J. Geomech., 209–216.
Oda, M. (1972). “The mechanism of fabric changes during compressional deformation of sand.” Soils Found., 12(2), 1–18.
Oda, M., and Iwashita, K. (1999). Mechanics of granular materials: An introduction, A.A. Balkema, Rotterdam, The Netherlands.
Oda, M., Konishi, J., and Nemat-Nasser, S. (1982). “Experimental micromechanical evaluation of strength of granular materials: Effects of particle rolling.” Mech. Mater., 1(4), 269–283.
Oda, M., and Nakayama, H. (1988). “Introduction of inherent anisotropy of soils in the yield function.” Micromechanics of granular materials. M. Satake and J. T. Jenkin, eds., Elsevier Science Pub., Amsterdam, The Netherlands, 81–90.
Papadimitriou, A. G., Dafalias, Y. F., and Yoshimine, M. (2005). “Plasticity modeling of the effect of sample preparation method on sand response.” Soils Found., 45(2), 109–124.
PFC3D 3.1 [Computer software]. Itasca Consulting Group, Minneapolis.
Poulos, S. J. (1981). “The steady state of deformation.” J. Geotech. Engrg. Div., 107(5), 553–562.
Riemer, M. F., and Seed, R. B. (1997). “Factors affecting apparent position of steady-state line.” J. Geotech. Geoenviron. Eng., 281–288.
Roscoe, K., and Burland, J. B. (1968). “On the generalized stress-strain behavior of wet clay.” Engineering Plasticity, J. Heyman and F. A. Leckie, eds., Cambridge University Press, Cambride, U.K., 535–609.
Roscoe, K. H., Schofield, A., and Wroth, C. P. (1958). “On the yielding of soils.” Géotechnique, 8(1), 22–53.
Schofield, A., and Wroth, P. (1968). Critical state soil mechanics, McGraw-Hill, London.
Scott, R. F. (1985). “Plasticity and constitutive relations in soil mechanics.” J. Geotech. Eng., 559–605.
Sitharam, T. G., and Vinod, J. S. (2009). “Critical state behaviour of granular materials from isotropic and rebounded paths: DEM simulations.” Granular Matter, 11(1), 33–42.
Tatsuoka, F., Ochi, K., Fujii, S., and Okamoto, M. (1986). “Cyclic undrained triaxial and torsional shear strength of sands for different sample preparation methods.” Soils Found., 26(3), 23–41.
Thornton, C., and Zhang, L. (2010). “On the evolution of stress and microstructure during general 3D deviatoric straining of granular media.” Géotechnique, 60(5), 333–341.
Vaid, Y. P., and Chern, J. C. (1985). “Cyclic and monotonic undrained response of saturated sands.” Advances in the art of testing soils under cyclic conditions, ASCE, Reston, VA, 120–147.
Vaid, Y. P., Chung, E. K. F., and Kuerbis, R. H. (1990). “Stress path and steady state.” Can. Geotech. J., 27(1), 1–7.
Vaid, Y. P., Sivathayalan, S., and Stedman, D. (1999). “Influence of specimen reconstituting method on the undrained response of sand.” Geotech. Test. J., 22(3), 187–195.
Verdugo, R., and Ishihara, K. (1996). “The steady state of sandy soils.” Soils Found., 36(2), 81–91.
Wheeler, S. J., and Sivakumar, V. (1995). “An elasto-plastic critical state framework for unsaturated soil.” Géotechnique, 45(1), 35–53.
Woo, S. I., and Salgado, R. (2015). “Bounding surface modeling of sand with consideration of fabric and its evolution during monotonic shearing.” Int. J. Solids Struct., 63, 277–288.
Wood, D. M., and Maeda, K. (2008). “Changing grading of soil: Effect on critical states.” Acta Geotech., 3(1), 3–14.
Yan, W. M., and Zhang, L. (2013). “Fabric and the critical state of idealized granular assemblages subject to biaxial shear.” Comput. Geotech., 49, 43–52.
Yang, Z. X., Li, X. S., and Yang, J. (2008). “Quantifying and modelling fabric anisotropy of granular soils.” Géotechnique, 58(4), 237–248.
Yang, Z. X., Yang, J., and Wang, L. Z. (2012). “On the influence of inter-particle friction and dilatancy in granular materials: A numerical analysis.” Granular Matter, 14(3), 433–447.
Yang, Z. X., Yang, J., and Wang, L. Z. (2013). “Micro-scale modeling of anisotropy effects on undrained behavior of granular soils.” Granular Matter, 15(5), 557–572.
Yimsiri, S., and Soga, K. (2010). “DEM analysis of soil fabric effects on behaviour of sand.” Géotechnique, 60(6), 483–495.
Yin, Z. Y., and Chang, C. S. (2009). “Non-uniqueness of critical state line in compression and extension conditions.” Int. J. Numer. Anal. Methods Geomech., 33(10), 1315–1338.
Yoshimine, M., Ishihara, K., and Vargas, W. (1998). “Effects of principal stress direction and intermediate principal stress on undrained shear behavior of sand.” Soils Found., 38(3), 179–188.
Yu, H. S. (1998). “CASM: A unified state parameter model for clay and sand.” Int. J. Numer. Anal. Methods Geomech., 22(8), 621–653.
Zhao, J., and Guo, N. (2013). “Unique critical state characteristics in granular media considering fabric anisotropy.” Géotechnique, 63(8), 695–704.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 17 • Issue 2 • February 2017
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 6, 2015
Accepted: Apr 12, 2016
Published online: May 25, 2016
Discussion open until: Oct 25, 2016
Published in print: Feb 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.