Eulerian Finite-Element Technique for Analysis of Jack-Up Spudcan Penetration
Publication: International Journal of Geomechanics
Volume 12, Issue 1
Abstract
The numerical analysis of an object penetrating deep into the seabed is a fundamentally challenging problem. This paper presents the application of a novel Eulerian-based finite-element technique to simulate the continuous penetration of a jack-up spudcan foundation into seabed of different soil profiles. The finite-element mesh is kept stationary throughout the analysis and the material is allowed to move independent of the element nodal points. Consequently, termination of computing execution from severe mesh distortion does not occur despite the material undergoing large deformation. The first part of the paper elucidates the mesh density requirement, the effect of penetration rates, and factors influencing the simulation time. The applicability of the Eulerian finite-element model is then validated through comparison with published experimental data for different soil profiles. In general, the Eulerian finite-element model is able to replicate the experimental observations well. With the Eulerian approach, classical wished-in-place approximation in spudcan penetration analysis is no longer necessary and a more accurate continuous penetration simulation can be routinely performed with minimal user-intervention.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS [Computer software] Version 6.8 User’s Manuals. (2008). SIMULIA, Providence, R. I.
Benson, D. J. (1992). “Computational methods in lagrangian and eulerian hydrocodes.” Comput. Methods Appl. Mech. Eng., 99(2–3), 235–394.
Craig, W. H., and Chua, K. (1990). “Deep penetration of spud-can foundations on sand and clay.” Geotechnique, 40(4), 541–556.
Einav, I., and Randolph, M. (2005). “Combining upper bound and strain path methods for evaluating penetration resistance.” Int. J. Numer. Methods Eng., 63(14), 1991–2016.
Hossain, M. S., Hu, Y., Randolph, M. F., and White, D. J. (2005). “Limiting cavity depth for spudcan foundations penetrating clay.” Geotechnique, 55(9), 679–690.
Hossain, M., and Randolph, M. (2009a). “Effect of strain rate and strain softening on the penetration resistance of spudcan foundations on clay.” Int. J. Geomech., 9(3), 122–132.
Hossain, M. S., and Randolph, M. F. (2009b). “New mechanism-based design approach for spudcan foundations on single layer clay.” J. Geotech. Geoenviron. Eng., 135(9), 1264–1274.
Hossain, M. S., and Randolph, M. F. (2010a). “Deep-penetrating spudcan foundations on layered clays: Centrifuge tests.” Geotechnique, 60(3), 157–170.
Hossain, M. S., and Randolph, M. F. (2010b). “Deep-penetrating spudcan foundations on layered clays: Numerical analysis.” Geotechnique, 60(3), 171–184.
Hu, Y., and Randolph, M. F. (1998). “A practical numerical approach for large deformation problems in soil.” Int. J. Numer. Anal. Methods Geomech., 22(5), 327–350.
Hunt, R. J., and Marsh, P. D. (2004). “Opportunities to improve the operational and technical management of jack-up deployments.” Mar. Struct., 17(3–4), 261–273.
LS-DYNA [Computer software] keyword user’s manual version 971. (2007). LSTC, Livermore, CA.
Menzies, D., and Roper, R. (2008). “Comparison of jackup rig spudcan penetration methods in clay.” Proc. Offshore Technology Conference OTC-19545., Society of Petroleum Engineers, Allen, TX.
Teh, K. L., Cassidy, M., Leung, C. F., Chow, Y. K., Randolph, M. F., and Quah, C. (2008). “Revealing the bearing capacity mechanisms of a penetrating spudcan through sand overlying clay.” Geotechnique, 58(10), 793–804.
Xie, Y. (2009). “Centrifuge model study on spudcan-pile interaction.” Ph.D. thesis, National University of Singapore.
Yu, L., Hu, Y., and Liu, J. (2009). “Spudcan penetration in loose sand over uniform clay.” Proc. of the ASME 2009 28th International Conference on Ocean, Offshore and Arctic Engeering, OMAE2009-79214, ASME, New York.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 12 • Issue 1 • February 2012
Pages: 64 - 73
Copyright
© 2012 American Society of Civil Engineers.
History
Received: May 27, 2010
Accepted: Dec 27, 2010
Published online: Dec 29, 2010
Published in print: Feb 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.