Cavitation Characteristics and Hydrodynamic Radial Forces of a Reversible Pump–Turbine at Pump Mode
Publication: Journal of Energy Engineering
Volume 146, Issue 6
Abstract
As the most critical part of a hydropower station, reversible pump–turbines (RPTs) are facing the trend of high parameterization (e.g., high head and high rotation speed) with the rapid development of hydropower, which may cause more detrimental cavitation-induced hydrodynamic forces. Considering that cavitation occurs more easily under pump mode than turbine mode for the RPT, the characteristics and generation mechanism of the hydrodynamic radial force induced by cavitation of a RPT model at pump mode are investigated by computational fluid dynamics and experimental methods. Combined with the shear stress transport (SST) turbulence model, the three-dimensional (3D) unsteady Reynolds-averaged Navier-Stokes (URANS) equations are solved to calculate the cavitation flow of the RPT at various cavitation states. The blade loading and the pressure pulsations of the pressure/suction surfaces of the blade are monitored from the inlet to the outlet. Results show that with the development of cavitation, increasing cavitation bubbles covering the blade surfaces lead to the decrease of the blade loading, weaken the regularity of the pressure fluctuation, and increase the amplitude of the pressure pulsation, especially the suction surface. Furthermore, the characteristics of hydrodynamic radial forces under various cavitation states are discussed, and it is found that the values of the hydrodynamic radial forces become larger and the alternating hydrodynamic radial forces are more remarkable with the development of cavitation. Meanwhile, the symmetry of the radial force of the impeller presents a slight change due to the rotor–stator interaction between impeller and guide vanes and the symmetrical structure of the guide vanes. Then, to explore the generation mechanism of the hydrodynamic radial forces, the frequency spectrum of the pressure pulsation and hydrodynamic radial forces are analyzed comparatively. It is found that the hydrodynamic radial forces are affected by the rotor–stator interaction in the initial stage of cavitation, whereas the influence of the pressure distribution of suction surface of the blade increases with the development of cavitation.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request (method of model processing and computing strategies).
Acknowledgments
This work is supported by the National Natural Science Foundation of China (Grant No. 51806145).
References
Chalghoum, I., S. Elaoud, H. Kanfoudi, and M. Akrout. 2018. “The effects of the rotor-stator interaction on unsteady pressure pulsation and radial force in a centrifugal pump.” J. Hydrodyn. 30 (4): 672–681. https://doi.org/10.1007/s42241-018-0073-y.
Escaler, X., E. Egusquiza, M. Farhat, F. Avellan, and M. Coussirat. 2006. “Detection of cavitation in hydraulic turbines.” Mech. Syst. Signal Process. 20 (4): 983–1007. https://doi.org/10.1016/j.ymssp.2004.08.
Fernandez, J., R. Barrio, E. Blanco, J. L. Parrondo, and A. Marcos. 2009. “Numerical investigation of a centrifugal pump running in reverse mode.” Proc. Inst. Mech. Eng. Part A: J. Power Energy 224 (3): 373–381. https://doi.org/10.1243/09576509jpe757.
Hao, Y., and L. Tan. 2018. “Symmetrical and unsymmetrical tip clearances on cavitation performance and radial force of a mixed flow pump as turbine at pump mode.” Renewable Energy 127 (Nov): 368–376. https://doi.org/10.1016/j.renene.2018.04.072.
Jese, U., R. Fortes-Patella, and S. Antheaume. 2014. “High head pump-turbine: Pumping mode numerical simulations with a cavitation model for off-design conditions.” IOP Conf. Ser.: Earth Environ. Sci. 22 (3): 032048. https://doi.org/10.1088/1755-1315/22/3/032048.
Jese, U., R. Fortes-Patella, and M. Dular. 2015. “Numerical study of pump-turbine instabilities under pumping mode off-design conditions.” In Vol. 57212 of Fluids engineering division summer meeting, V001T33A018. Reston, VA: ASME.
Kumar, P., and R. P. Saini. 2010. “Study of cavitation in hydro turbines—A review.” Renewable Sustainable Energy Rev. 14 (1): 374–383. https://doi.org/10.1016/j.rser.2009.07.024.
Li, D., H. Wang, G. Xiang, R. Gong, X. Wei, and Z. Liu. 2015. “Unsteady simulation and analysis for hump characteristics of a pump turbine model.” Renewable Energy 77: 32–42. https://doi.org/10.1016/j.renene.2014.12.004.
Li, J. W., Y. N. Zhang, K. H. Liu, H. Z. Xian, and J. X. Yu. 2017. “Numerical simulation of hydraulic force on the impeller of reversible pump turbines in generating mode.” J. Hydrodyn. 29 (4): 603–609. https://doi.org/10.1016/S1001-6058(16)60773-4.
Liu, J., S. Liu, Y. Wu, L. Jiao, L. Wang, and Y. Sun. 2012. “Numerical investigation of the hump characteristic of a pump–turbine based on an improved cavitation model.” Comput. Fluids 68 (Sep): 105–111. https://doi.org/10.1016/j.compfluid.2012.08.001.
Liu, J. T. 2013. Instability analysis of the “S” region of a pump-turbine based on nonlinear PANS model. [In Chinese.] Hangzhou, China: Zhejiang Univ.
Liu, X., Y. Luo, and Z. Wang. 2016. “A review on fatigue damage mechanism in hydro turbines.” Renewable Sustainable Energy Rev. 54 (Feb): 1–14. https://doi.org/10.1016/j.rser.2015.09.025.
Luo, X. W., B. Ji, and Y. Tsujimoto. 2016. “A review of cavitation in hydraulic machinery.” J. Hydrodyn. 28 (3): 335–358. https://doi.org/10.1016/S1001-6058(16)60638-8.
Luo, Y., Z. Wang, J. Zhang, J. Zeng, J. Lin, and G. Wang. 2013. “Vibration and fatigue caused by pressure pulsations originating in the vaneless space for a Kaplan turbine with high head.” Eng. Comput. 30 (3): 448–463. https://doi.org/10.1108/02644401311314376.
Menter, F. R. 1994. “Two-equation eddy-viscosity turbulence models for engineering applications.” AIAA J. 32 (8): 1598–1605. https://doi.org/10.2514/3.12149.
Novotný, V., V. Habán, A. Skoták, and R. Loub. 2019. “Dynamic radial forces and pressure fluctuations measurement at off-design conditions on a model scale pump-turbine.” In Vol. 405 of Proc., IOP Conf. Series: Earth and Environmental Science, 012016. Stuttgart, Germany: IOP Publishing. https://doi.org/10.1088/1755-1315/405/1/012016.
Shi, F., J. Yang, and X. Wang. 2018. “Effect of different guide vane numbers on transient radial force of pump as turbine.” Int. J. Fluid Mach. Syst. 11 (1): 115–122. https://doi.org/10.5293/IJFMS.2018.11.1.115.
Tan, L., W. Shi, D. Zhang, C. Wang, L. Zhou, and E. Mahmoud. 2018. “Numerical and experimental investigations on the hydrodynamic radial force of single-channel pumps.” J. Mech. Sci. Technol. 32 (10): 4571–4581. https://doi.org/10.1007/s12206-018-0903-4.
Tao, R., R. Xiao, F. Wang, and W. Liu. 2018. “Cavitation behavior study in the pump mode of a reversible pump-turbine.” Renewable Energy 125 (Sep): 655–667. https://doi.org/10.1016/j.renene.2018.02.114.
Xu, R., Y. Long, Y. Hu, J. Yin, and D. Wang. 2019. “Numerical and experimental research on the fluid-induced forces of clearance flow in canned motor reactor coolant pump.” J. Eng. Gas Turbines Power 141 (6): 061021. https://doi.org/10.1115/1.4041756.
Zhang, L., X. Jing, Z. Wang, J. Chang, and G. Peng. 2009. “Analysis of Francis pump-turbine runner cavitation flows in pump mode.” In Vol. 43734 of Fluids engineering division summer meeting, 131–134. Keystone, CO: ASME.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Apr 2, 2020
Accepted: Jul 6, 2020
Published online: Sep 15, 2020
Published in print: Dec 1, 2020
Discussion open until: Feb 15, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.